Community hub
Recent from talks
Knowledge base stats:
Talk channels stats:
Members stats:
Acre
The acre (/ˈeɪkər/ AY-kər) is a unit of land area used in the British imperial and the United States customary systems. It is traditionally defined as the area of one chain by one furlong (66 by 660 feet), which is exactly equal to 10 square chains, 1⁄640 of a square mile, 4,840 square yards, or 43,560 square feet, and approximately 4,047 m2, or about 40% of a hectare. The acre is sometimes abbreviated ac, but is usually spelled out as the word "acre".
Traditionally, in the Middle Ages, an acre was conceived of as the area of land that could be ploughed by one man using a team of eight oxen in one day. The acre is still a statutory measure in the United States, where both the international acre and the US survey acre are in use, but they differ by only four parts per million. The most common use of the acre is to measure tracts of land. The acre is used in many existing and former Commonwealth of Nations countries by custom. In a few, it continues as a statute measure, although not since 2010 in the UK, and not for decades in Australia, New Zealand, and South Africa. In many places where the acre is no longer a statute measure, it is still lawful to use as supplementary information next to the statutory hectare measurement.
One acre equals 1⁄640 (0.0015625) square mile, 4,840 square yards, 43,560 square feet, or about 4,047 square metres (0.4047 hectares) (see below). While all modern variants of the acre contain 4,840 square yards, there are alternative definitions of a yard, so the exact size of an acre depends upon the particular yard on which it is based. Originally, an acre was understood as a strip of land sized at forty perches (660 ft, or 1 furlong) long and four perches (66 ft) wide; this may have also been understood as an approximation of the amount of land a yoke of oxen could plough in one day (a furlong being "a furrow long"). A square enclosing one acre is approximately 69.57 yards, or 208 feet 9 inches (63.61 metres), on a side. As a unit of measure, an acre has no prescribed shape; any area of 43,560 square feet is an acre.
In the international yard and pound agreement of 1959, the United States and five countries of the Commonwealth of Nations defined the international yard to be exactly 0.9144 metre. The US authorities decided that, while the refined definition would apply nationally in all other respects, the US survey foot (and thus the survey acre) would continue 'until such a time as it becomes desirable and expedient to readjust [it]'. By inference, an "international acre" may be calculated as exactly 4,046.8564224 square metres but it does not have a basis in any international agreement.
Both the international acre and the US survey acre contain 1⁄640 of a square mile or 4,840 square yards, but alternative definitions of a yard are used (see Foot (unit) § Survey foot and Yard § Conversions), so the exact size of an acre depends upon the yard upon which it is based. The US survey acre is about 4,046.872 square metres; its exact value (4046+13,525,426/15,499,969 m2) is based on an inch defined by 1 metre = 39.37 inches exactly, as established by the Mendenhall Order of 1893. Surveyors in the United States use both international and survey feet, and consequently, both varieties of acre.
Since the difference between the US survey acre and international acre (0.016 square metres, 160 square centimetres or 24.8 square inches), is only about a quarter of the size of an A4 sheet or US letter, it is usually not important which one is being discussed. Areas are seldom measured with sufficient accuracy for the different definitions to be detectable. In October 2019, the US National Geodetic Survey and the National Institute of Standards and Technology announced their joint intent to end the "temporary" continuance of the US survey foot, mile, and acre units (as permitted by their 1959 decision, above), with effect from the end of 2022.
The Puerto Rican cuerda (0.39 ha; 0.97 acres) is sometimes called the "Spanish acre" in the continental United States.
The acre is commonly used in many current and former Commonwealth countries by custom, and in a few it continues as a statute measure. These include Antigua and Barbuda, American Samoa, The Bahamas, Belize, the British Virgin Islands, Canada, the Cayman Islands, Dominica, the Falkland Islands, Grenada, Ghana, Guam, the Northern Mariana Islands, Jamaica, Montserrat, Samoa, Saint Lucia, St. Helena, St. Kitts and Nevis, St. Vincent and the Grenadines, Turks and Caicos, the United Kingdom, the United States, and the US Virgin Islands.
Hub AI
Acre AI simulator
(@Acre_simulator)
Acre
The acre (/ˈeɪkər/ AY-kər) is a unit of land area used in the British imperial and the United States customary systems. It is traditionally defined as the area of one chain by one furlong (66 by 660 feet), which is exactly equal to 10 square chains, 1⁄640 of a square mile, 4,840 square yards, or 43,560 square feet, and approximately 4,047 m2, or about 40% of a hectare. The acre is sometimes abbreviated ac, but is usually spelled out as the word "acre".
Traditionally, in the Middle Ages, an acre was conceived of as the area of land that could be ploughed by one man using a team of eight oxen in one day. The acre is still a statutory measure in the United States, where both the international acre and the US survey acre are in use, but they differ by only four parts per million. The most common use of the acre is to measure tracts of land. The acre is used in many existing and former Commonwealth of Nations countries by custom. In a few, it continues as a statute measure, although not since 2010 in the UK, and not for decades in Australia, New Zealand, and South Africa. In many places where the acre is no longer a statute measure, it is still lawful to use as supplementary information next to the statutory hectare measurement.
One acre equals 1⁄640 (0.0015625) square mile, 4,840 square yards, 43,560 square feet, or about 4,047 square metres (0.4047 hectares) (see below). While all modern variants of the acre contain 4,840 square yards, there are alternative definitions of a yard, so the exact size of an acre depends upon the particular yard on which it is based. Originally, an acre was understood as a strip of land sized at forty perches (660 ft, or 1 furlong) long and four perches (66 ft) wide; this may have also been understood as an approximation of the amount of land a yoke of oxen could plough in one day (a furlong being "a furrow long"). A square enclosing one acre is approximately 69.57 yards, or 208 feet 9 inches (63.61 metres), on a side. As a unit of measure, an acre has no prescribed shape; any area of 43,560 square feet is an acre.
In the international yard and pound agreement of 1959, the United States and five countries of the Commonwealth of Nations defined the international yard to be exactly 0.9144 metre. The US authorities decided that, while the refined definition would apply nationally in all other respects, the US survey foot (and thus the survey acre) would continue 'until such a time as it becomes desirable and expedient to readjust [it]'. By inference, an "international acre" may be calculated as exactly 4,046.8564224 square metres but it does not have a basis in any international agreement.
Both the international acre and the US survey acre contain 1⁄640 of a square mile or 4,840 square yards, but alternative definitions of a yard are used (see Foot (unit) § Survey foot and Yard § Conversions), so the exact size of an acre depends upon the yard upon which it is based. The US survey acre is about 4,046.872 square metres; its exact value (4046+13,525,426/15,499,969 m2) is based on an inch defined by 1 metre = 39.37 inches exactly, as established by the Mendenhall Order of 1893. Surveyors in the United States use both international and survey feet, and consequently, both varieties of acre.
Since the difference between the US survey acre and international acre (0.016 square metres, 160 square centimetres or 24.8 square inches), is only about a quarter of the size of an A4 sheet or US letter, it is usually not important which one is being discussed. Areas are seldom measured with sufficient accuracy for the different definitions to be detectable. In October 2019, the US National Geodetic Survey and the National Institute of Standards and Technology announced their joint intent to end the "temporary" continuance of the US survey foot, mile, and acre units (as permitted by their 1959 decision, above), with effect from the end of 2022.
The Puerto Rican cuerda (0.39 ha; 0.97 acres) is sometimes called the "Spanish acre" in the continental United States.
The acre is commonly used in many current and former Commonwealth countries by custom, and in a few it continues as a statute measure. These include Antigua and Barbuda, American Samoa, The Bahamas, Belize, the British Virgin Islands, Canada, the Cayman Islands, Dominica, the Falkland Islands, Grenada, Ghana, Guam, the Northern Mariana Islands, Jamaica, Montserrat, Samoa, Saint Lucia, St. Helena, St. Kitts and Nevis, St. Vincent and the Grenadines, Turks and Caicos, the United Kingdom, the United States, and the US Virgin Islands.