Hubbry Logo
Area codes 202 and 771Area codes 202 and 771Main
Open search
Area codes 202 and 771
Community hub
Area codes 202 and 771
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Area codes 202 and 771
Area codes 202 and 771
from Wikipedia

Area codes 571 and 703Area codes 301, 240, and 227
The red area is the District of Columbia, served by area codes 202 and 771.

Area codes 202 and 771 are telephone area codes in the North American Numbering Plan (NANP) for Washington, D.C.

Area code 202 was one of the original North American area codes established in October 1947 by the American Telephone and Telegraph Company (AT&T). After the State of New Jersey with area code 201, the District of Columbia was the second numbering plan area (NPA). Area code 771 was added to the numbering plan area in April 2021 in creation of an overlay complex to mitigate impending telephone number shortages.

History

[edit]

Since the creation of the first nationwide telephone numbering plan in 1947, most of the inner ring of the Washington metropolitan area has been a single local calling area, the Washington Metropolitan Exchange Area (WMEA). This is despite the fact that the WMEA was split between three numbering plan areas (NPAs): the District's 202, 301 in southern Maryland, and 703 in Northern Virginia. From the 1950s to 1990, it was possible to complete local calls in the WMEA with only seven digits. The entire WMEA was reachable via long-distance services by dialing area code 202, for which purpose AT&T Long Lines had established cross-referenced operator routing codes for all affected central offices. This scheme was implemented via a system of central office code protection, in which central offices in the three numbering plan areas could not duplicate any central office prefixes for any of the three area codes in the WMEA.[1] For example, if the 202-574 exchange was in use in the District, the corresponding 703-574 or 301-574 exchange could only be assigned a safe distance from the metropolitan area, such as southwestern Virginia or the Eastern Shore of Maryland.

By spring 1990, C&P Telephone (later part of Bell Atlantic and now Verizon), the Regional Bell Operating Company for the District, advised the North American Numbering Plan Administration (NANPA) that the last interchangeable central office code in the area would be assigned in the second half of the year. The only remaining prefixes could not be assigned without eliminating seven-digit dialing in the region, leading C&P to terminate the central office code protection arrangement to make additional prefixes available for use. This change was implemented in a permissive dialing period from April 1, 1990, to October 1, 1990, at which time all home-NPA (HNPA) local calls maintained seven-digit dialing; all HNPA direct-dialed toll calls, required 1 and ten digits; foreign-NPA (FNPA) local calls were dialed with just the ten-digit number; FNPA direct dialed calls required dialing 1 and ten digits. Operator-assisted calls were all dialed as 0 and ten digits.[2]

The end of central office code protection was intended to allow number blocks to be assigned in the Washington area that could not previously be assigned under the previous system. However, it did not provide enough relief to meet demand on either side of the Potomac River. By the end of 1990, the Chesapeake and Potomac Telephone Company of Maryland determined that 301 was approaching exhaustion even with the end of central office code protection. It filed to assign area code 410 to most of Maryland from the Baltimore area eastward, effective October 5, 1991.[3] In Virginia, the delay amounted to six years, until 1996, when area code 540 was installed for the western portion of the old 703 territory; permissive dialing ended January 27, 1996.[4]

The region's continued growth in the 1990s ultimately led to both suburban area codes being overlaid, with area code 240 overlaying 301 in 1997, and area code 571 overlaying 703 in 2000.

With 202 facing exhaustion in late 2022, the North American Numbering Plan Administrator announced in October 2020 the addition of area code 771 to the District of Columbia. The Public Service Commission approved a plan to phase in the new area code over a 13-month period.[5][6] The installation of a second area code required transition to ten-digit dialing for all calls within the District.[7] The overlay implementation commenced with a permissive dialing period from April 10, 2021, to October 9, 2021, during which ten-digit dialing of 202-telephone numbers was optional.[8][5] The first central office code assignments for 771 took place on November 8, 2021, for central office code 777,[9] and on November 9 for 888.[10]

Local calling

[edit]

Even with the implementation of ten-digit dialing in the Washington metro, much of the Washington area is still a single local calling area.[11] The District is the center of one of the largest toll-free calling zones in the eastern United States, covering large portions of Virginia and Maryland.

Areas such as Alexandria, Arlington,[12] Fairfax,[13] Falls Church, McLean and Tysons in Virginia[14] (703/571) and Rockville,[15] Gaithersburg,[16] Upper Marlboro,[17] Bethesda[18] and Landover in Maryland[19] (301/240) are a local call to Washington.

See also

[edit]

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia
from Grokipedia
Area codes 202 and 771 are the (NANP) telephone area codes serving the entire District of Columbia, the federal capital of the . Area code 202, one of the original 86 area codes established in 1947, has exclusively covered Washington, D.C., since its creation and is synonymous with the city's identity. Due to rapid growth in telephone demand and the impending exhaustion of available 202 numbers—projected to run out by the third quarter of 2022—area code 771 was introduced as an all-services overlay complex, superimposed over the same geographic boundaries without requiring existing customers to change their numbers. The area code was assigned on October 1, 1947, as part of the initial NANP rollout to facilitate direct-dial across the U.S. and , initially serving all phone lines in without any splits or overlays for over seven decades. Its iconic status has made it a cultural symbol, often associated with political and governmental communications, though the high demand from residents, businesses, and federal entities led to only 36 prefixes remaining by early 2020. In response to the number shortage, the District of Columbia Public Service Commission (DCPSC), in coordination with the , approved the 771 overlay on September 22, 2020, following a public input process that considered alternatives like geographic splits but favored the overlay to avoid disrupting service. The implementation unfolded in stages: a six-month network preparation period, followed by six months of permissive 10-digit dialing for local calls (starting April 2021), and mandatory 10-digit dialing from October 9, 2021, onward. New numbers began being assigned the 771 prefix on November 9, 2021, ensuring continued availability for wireline, wireless, and VoIP services across the District. The overlay requires all local calls within Washington, D.C., to include the area code (either 202 or 771) plus the seven-digit number, prompting updates to alarm systems, fax machines, and contact lists to prevent service disruptions. Businesses and residents were encouraged to include the full 10-digit number on stationery and promotional materials, with no impact on toll-free or long-distance calling. As of 2025, both codes continue to operate concurrently, supporting the District's dense population and high telecommunications usage without further expansions planned.

Overview

Service Area

Area codes 202 and 771 serve the entire District of Columbia, a that functions as the capital of the and is coextensive with the city of Washington. The District encompasses a total area of 68 square miles, consisting of 61 square miles of land and 7 square miles of water, and lacks any county divisions, operating instead under a single unified government structure. The geographic boundaries of these area codes align precisely with the District's limits, established under the and adjusted in 1846 when land south of the was retroceded to . This coverage includes all eight wards and numerous neighborhoods, such as the historic in Ward 6, the upscale Georgetown in Ward 2, and the culturally rich in Ward 8, ensuring comprehensive telephone service across the urban landscape. Unlike adjacent regions, area codes 202 and 771 do not extend into surrounding states; for instance, nearby counties like Montgomery and Prince George's, which border to the northeast and east, are served by area codes 301 and 240. Similarly, counties such as Arlington and Fairfax, located to the south and west across the , utilize area codes 703 and 571. As of the , the population served by these area codes totaled 689,545 residents; the estimated population was 702,250 as of 2024, with projections reaching 710,000 in 2025, concentrated in a high-density urban core that reflects the District's role as a political and economic hub. This compact footprint supports intense demand, with the overlay of 771 introduced to accommodate growth without altering the fixed service boundaries.

Current Status

Area codes 202 and 771 operate as an overlay complex serving the entire District of Columbia, with both codes in active use since the introduction of 771 on November 9, 2021. All new telephone numbers in the region are assigned from either code depending on availability, while existing 202 numbers remain unchanged. The 202 area code approached exhaustion by 2021 due to sustained high demand, prompting the deployment of 771 to extend numbering resources without geographic reconfiguration. As of early 2025, both codes retain significant remaining central office codes, with the combined 202/771 pool projected to exhaust no earlier than the fourth quarter of 2064 based on current utilization trends and forecasts. Legacy 202 numbers continue to be prioritized for new assignments until their resources are fully depleted. Number assignments for these codes are overseen by the District of Columbia Public Service Commission (DCPSC) in coordination with the Administrator (), which allocates blocks of numbers to telecommunications carriers for end-user distribution. Carriers request resources through 's processes, ensuring equitable access amid ongoing demand. Each area code supports over 8 million possible telephone numbers through the standard structure of 792 usable central office codes, each accommodating 10,000 subscriber lines. High demand persists due to Washington, D.C.'s dense concentration of government agencies, businesses, and tourism-related services, which drive population and economic activity requiring extensive resources.

History

Establishment of 202

Area code 202 was established in October 1947 by the American Telephone and Telegraph Company () as one of the 86 original numbering plan areas (NPAs) under the (NANP), designed to streamline in the post-World War II period when telephone usage was surging across the and . This plan replaced operator-assisted long-distance calls with a structured system of three-digit area codes prefixed to seven-digit local numbers, enabling more efficient nationwide connectivity as the continent's population and economic activity expanded. From its inception, area code 202 exclusively served the entire District of Columbia, reflecting the capital's central role in national governance and its relatively compact geographic footprint of approximately 68 square miles. The code's low digits—2-0-2—were deliberately selected to minimize dialing time on rotary telephones, where lower numbers required less finger rotation and reduced mechanical wear on switching equipment, a priority for high-volume areas like This assignment made 202 the second area code introduced after New Jersey's 201, prioritizing ease of use for frequent long-distance connections to the federal government. In its early years, the infrastructure supporting 202 facilitated the rollout of (DDD) across the NANP in the , allowing subscribers to place interstate calls without operator intervention for the first time, beginning with a demonstration in 1951. The code remained unchanged through the mid-20th century, accommodating steady growth in fixed-line without splits or overlays, as the District's stable and limited landline demand kept number exhaustion at bay. Significant pressure on 202's resources did not emerge until the , when the proliferation of mobile phones, fax machines, and pagers dramatically increased demand for new telephone numbers, outpacing the original projections for the NANP's capacity. By the early 2010s, amid ongoing population growth in —reaching over 700,000 residents—and the expansion of services including and VoIP, projections indicated that available central office codes (the next three digits after the area code) would deplete as early as 2019. This pre-overlay exclusivity of 202 persisted until the introduction of overlay code 771 in to address the impending shortage.

Introduction of 771

The introduction of area code 771 was necessitated by the impending exhaustion of available telephone numbers in the 202 numbering plan area, which serves The Administrator () projected that the 202 area code would deplete its reserves in the second quarter of 2023, based on data from the Numbering Resource Utilization and Forecast (NRUF) reports showing high demand from , business expansion, and increased mobile services. This forecast prompted the District of Columbia Public Service Commission (DCPSC) to initiate overlay planning in early 2020, forming an industry committee to develop a relief strategy without altering existing number assignments. The approval process culminated in NANPA's designation of 771 as the overlay code in September 2020, following DCPSC's formal endorsement of the plan on September 16, 2020, via Order No. 20627. The selection of 771 was deliberate, utilizing the unused middle digit 7 to reduce potential confusion with the established code and other nearby area codes, while ensuring compliance with NANP guidelines for available numbering resources. As an all-services overlay, 771 covers the identical geographic area as —the entirety of the District of Columbia—avoiding any geographic split that could disrupt longstanding neighborhoods, federal government operations, or local calling patterns. Rollout preparations emphasized a smooth transition, with (area code plus seven-digit number) becoming permissible starting April 10, 2021, and mandatory for all local calls from October 9, 2021, to accommodate the overlay and prevent dialing conflicts. Service for 771 officially commenced on , 2021, with initial assignments limited to new telephone lines and services, preserving all existing 202 numbers unchanged. This overlay approach, first implemented in the NANP in the , extended the usable lifespan of the numbering plan area while maintaining continuity for D.C.'s iconic 202 code, originally established in 1947. As of 2025, the 202 area code has not yet exhausted, thanks to the 771 overlay, with both codes operating concurrently and no further expansions planned.

Numbering and Dialing

Code Structure and Allocation

Telephone numbers assigned under area codes 202 and 771 adhere to the standard (NANP) format of a three-digit numbering plan area (NPA) code followed by a three-digit central code (NXX) and a four-digit (XXXX). The NXX code consists of a leading digit N from 2 to 9 and two digits X from 0 to 9, yielding 800 possible combinations, though 8 are reserved for service codes (N11), leaving 792 usable NXX prefixes per NPA. The XXXX line number spans 10,000 possibilities per NXX, with restrictions on the first digit in certain blocks to avoid conflicts with easily recognizable codes or special services. Central office codes (NXX) are allocated by the North American Numbering Plan Administrator () to telecommunications service providers, including major carriers such as Verizon Washington, DC, Inc. and , based on demonstrated need, utilization forecasts, and compliance with federal numbering guidelines. These assignments occur within the single designated rate center for the District of Columbia, known as Washington Zone 1, ensuring numbers are distributed uniformly across the entire District without location-specific partitioning. As an all-services overlay, area codes 202 and 771 share the identical pool of 792 possible NXX prefixes, enabling seamless assignment across both NPAs to meet demand in the same geographic . To optimize resource use and prevent by carriers, the final thousands block (the last digit of the NXX combined with XXXX, representing 1,000 numbers) is administered through the thousands-block number pooling (TBNP) system; carriers receive these blocks incrementally upon request and must return underutilized ones to a central pool for redistribution. Each area code supports a maximum capacity of 7.92 million numbers (792 NXX × 10,000 line numbers per NXX), though approximately 10% is typically reserved for future growth, administrative purposes, and non-assignable codes such as those for testing or . This structure was originally established for in and extended identically to the 771 overlay to accommodate ongoing expansion in the nation's capital.

Local Calling Areas

In the District of Columbia, all telephone calls within the 202 and 771 area codes require , consisting of the area code followed by the seven-digit telephone number, regardless of whether the call is placed to a 202 or 771 number. This mandatory was implemented on October 9, 2021, following a permissive period that began on April 10, 2021, to accommodate the overlay of the 771 area code and ensure compatibility across the numbering plan. Prior to this change, was permitted for local calls within the district, but the transition eliminated any distinction in dialing procedures between the two codes. The entire District of Columbia constitutes a single calling area (LCA), designated as Washington Zone 1, where all calls between any points within its geographic boundaries are classified as and incur no additional toll charges. This unified structure simplifies intra-district communication, with all exchanges served by the operating under this zone without internal rate boundaries. However, calls from the /771 area to adjacent codes in (such as 301 or 240) or (such as 703 or 571) are typically treated as toll calls, potentially incurring charges based on the caller's service plan and carrier policies, though many modern unlimited plans may include them as . Dialing between the 202 and 771 codes is seamless for local calls, requiring the same ten-digit format without any additional prefixes or distinctions, as both serve the identical geographic territory. For long-distance calls to destinations outside the (NANP) or to other states, users must dial 1 followed by the ten-digit number (1 + area code + seven digits). Operator-assisted calls now also require ten digits after the 0 prefix (0 + area code + seven digits), aligning with the updated network protocols. Emergency services remain accessible via the standard three-digit code 911, unaffected by the ten-digit dialing mandate, ensuring immediate connectivity without area code entry. Similarly, directory assistance is reached by dialing 411, with no changes required.

References

Add your contribution
Related Hubs
User Avatar
No comments yet.