Armored cruiser

The armored cruiser was a type of warship of the late 19th and early 20th centuries. It was designed like other types of cruisers to operate as a long-range, independent warship, capable of defeating any ship apart from a pre-dreadnought battleship and fast enough to outrun any battleship it encountered.

For many decades, naval technology had not advanced far enough for designers to produce a cruiser that combined an armored belt with the long-range and high speed required to fulfill its mission. For this reason, beginning in the 1880s and 1890s, many navies preferred to build protected cruisers, which only relied on a lightly armored deck to protect the vital parts of the ship. However, by the late 1880s, the development of modern rapid-fire breech-loading cannons and high-explosive shells made the reintroduction of side armor a necessity. The invention of case-hardened armor in the mid-1890s offered effective protection with less weight than previously.

Varying in size, the armored cruiser was distinguished from other types of cruiser by its belt armor—thick iron (or later steel) plating on much of the hull to protect the ship from shellfire much like that on battleships. The first armored cruiser, the Imperial Russian Navy's General-Admiral, was launched in 1873 and combined sail and steam propulsion. By the 1890s, cruisers had abandoned sail and took on a modern appearance.

In 1908, the armored cruiser was supplanted by the battlecruiser, which, with armament equivalent to that of a dreadnought battleship and speed equivalent to that of a cruiser, was faster and more powerful than an armored cruiser. At around the same time there was a successor to the protected cruiser, the "light cruiser" which described small cruisers with armored belts. Although they were now considered second-rate ships, armored cruisers were still widely used in World War I due to their speed and range, and being able to outgun all but battlecruisers and battleships (both pre-dreadnought and dreadnought types). Most surviving armored cruisers from this conflict were scrapped under the terms of the Washington Naval Treaty of 1922, which imposed limits on warships and defined a cruiser as a ship of 10,000 tons or less carrying guns of 8-inch caliber or less—rather smaller than many of the large armored cruisers. A handful survived in one form or another until World War II. Only one, the Greek Navy's Georgios Averof, has survived to the modern day as a museum ship.

The armored cruiser was developed in the 1870s as an attempt to combine the virtues of the armored ironclad warship and the fast and long-ranged, but unarmored, cruisers of the time. Such a ship was desirable to protect overseas trade and, especially for the French and British, to police their vast overseas empires. The concern within higher naval circles was that without ships that could fulfill these requirements and incorporate new technology, their fleet would become obsolete and ineffective should a war at sea arise. Concern over obsolescence in official circles was further fueled by the race between the increasing size of naval guns and of armor strong enough to withstand such fire. In 1860, one of the largest naval cannons in standard use had a bore of 8 inches (203 mm) and fired a 68-pound (31 kg) solid shot or approximately 51-pound (23 kg) spherical shell. By 1884, guns with as wide a bore as 16.25 inches (413 mm), firing an 1,800-pound (816 kg) exploding shell, were being mounted on naval vessels. This gun could penetrate up to 34 inches of wrought iron, the earliest form of naval armor. These were muzzle-loading guns, as had been used on ships from the 1500s. Breech-loading cannon, which were readopted into naval use in the 1870s, were more destructive than muzzle loaders due to their higher rate of fire. The development of rifled cannon, which improved accuracy, and advancements in shells were other factors. Although a cruiser would not likely face the largest-caliber guns of a battleship and many navies commonly used smaller weapons as they did not wear out as fast as larger ones did, cruisers still needed some form of protection to preclude being shot to pieces.

The adoption of rolled iron armor in 1865 and sandwich armor in 1870 gave ships a chance to withstand fire from larger guns. Both these protective schemes used wood as an important component, which made them extremely heavy and limited speed, the key factor in a cruiser's ability to perform its duties satisfactorily. While the first ocean-going ironclads had been launched around 1860, the "station ironclads" built for long-range colonial service such as the British Audacious class and French Belliqueuse were too slow, at 13 and 11 knots respectively, to raid enemy commerce or hunt down enemy commerce raiders, tasks usually assigned to frigates or corvettes. Powered by both sail and steam but without the additional weight of armor, these ships could reach speeds of up to 16 or 17 knots. The most powerful among them were the British Inconstant, the U.S. Navy's Wampanoag and the French Duquesne. The British especially had hoped to rely on these vessels to serve the more distant reaches of its empire. In the aftermath of the Battle of Hampton Roads in 1862, where United States wooden warships were defeated by the Confederate ironclad CSS Virginia, the Admiralty realized that its ships could theoretically encounter an ironclad in any theater of operation.^{[full citation needed]}

Ship propulsion was improving but was also taking time to develop. Naval engines in the 1860s were single-expansion types, in which steam was expanded into a cylinder, pushed a piston and was released. Compounding, where steam is passed through a series of cylinders of increasing size before being released, was a more efficient process; it allowed the steam to generate more energy and use less coal to go the same distance. With greater efficiency came increasingly complex machinery and the larger potential for breakdown. However, advances in metallurgy and engineering, the potential for smaller bunkerage and the successful use of compounding in commercial engines made it an attractive option for naval engines, as well. By the 1870s, compound engines had become standard for warships. Compounding by itself did not increase power or speed significantly, although it allowed for a much greater operating range. Forced-draught systems would help increase power and speed but would not come into use until the early 1890s.

The Russian navy became the first to produce an armored warship intended for commerce raiding, with General-Admiral, begun in 1870 and launched in 1873, often referred to as the first armored cruiser. Armed with six 8-inch (203 mm) and two 6-inch (152 mm) guns, she and her sister Gerzog Edinburgski were not fully armored but protected only by a narrow belt along the waterline. This belt, moreover, was so heavy that it sat below the ships' waterlines, which limited its benefit still further. Since they were iron-hulled, however, they were more durable than their wooden counterparts. With a top speed of only 12.3 knots (22.8 km/h) and a high coal consumption, which necessitated a full sailing rig, they were not really suited for the role of cruiser. Nevertheless, these ships were considered a new threat to British commerce in the event of war, the rationale being that any vessel, regardless of its speed, could technically be a threat to overseas commerce.