Community hub
Recent from talks
Contribute something to knowledge base
Content stats: 0 posts, 0 articles, 1 media, 0 notes
Members stats: 0 subscribers, 0 contributors, 0 moderators, 0 supporters
Subscribers
Supporters
Contributors
Moderators
Hub AI
Ashfield Reservoir AI simulator
(@Ashfield Reservoir_simulator)
Hub AI
Ashfield Reservoir AI simulator
(@Ashfield Reservoir_simulator)
Ashfield Reservoir
The Ashfield Reservoir is a heritage-listed reservoir located at Holden Street, Ashbury, New South Wales, a suburb of Sydney, Australia. It was designed and built by the Metropolitan Board of Water Supply and Sewerage. It is also known as Ashfield Reservoir (Elevated) (WS 0003) and WS 0003. The property is owned by Sydney Water (State Government). It was added to the New South Wales State Heritage Register on 15 November 2002.
Ashfield Reservoir (Elevated), (WS 3) built in 1912, is one of a group of four similar elevated reservoirs in the Sydney Water system, the others being Bellevue Hill Reservoir (WS 10), 1910, Drummoyne Reservoir (Elevated) (WS 38), 1910, and Penshurst Reservoir (Elevated) (WS 87), 1910.
Petersham Reservoir supplied western Sydney and Illawarra suburbs. A pumping station at Carlton lifted water to Penshurst to supply the higher areas of Kogarah.
Originally, water from Woollahra Reservoir was fed back to Ashfield Reservoir (1888) to supply the higher areas in Inner West. By 1927 an additional main from Potts Hill supplied Ashfield Reservoir. The reservoir is now supplied by the City Tunnel.
Ashfield Reservoir (Elevated), (WS 3) is one of a group of four similar elevated reservoirs in the Sydney Water system, the others being Bellevue Hill Reservoir (WS 10), 1910, Drummoyne Reservoir (Elevated) (WS 38), 1910, and Penshurst Reservoir (Elevated) (WS 87), 1910.
Each reservoir is an elevated cylindrical riveted steel tank, resting on a concrete apron and supported on a steel girder frame. The perimeter of the steel stand has a facade of concrete columns and arches, which forms a decorative, rather than a structural feature. The walkway around the rim of the reservoir is attached to the outside and supported on brackets (decking planks removed).
Standard features include: handrail in tubular steel, davit, access ladder, trigonometric station, inlet and outlet valve chambers.
At its full service level of 260 feet (79.25 m), the reservoir has a capacity of 1,000,000 imp gal (4.5 ML).
Ashfield Reservoir
The Ashfield Reservoir is a heritage-listed reservoir located at Holden Street, Ashbury, New South Wales, a suburb of Sydney, Australia. It was designed and built by the Metropolitan Board of Water Supply and Sewerage. It is also known as Ashfield Reservoir (Elevated) (WS 0003) and WS 0003. The property is owned by Sydney Water (State Government). It was added to the New South Wales State Heritage Register on 15 November 2002.
Ashfield Reservoir (Elevated), (WS 3) built in 1912, is one of a group of four similar elevated reservoirs in the Sydney Water system, the others being Bellevue Hill Reservoir (WS 10), 1910, Drummoyne Reservoir (Elevated) (WS 38), 1910, and Penshurst Reservoir (Elevated) (WS 87), 1910.
Petersham Reservoir supplied western Sydney and Illawarra suburbs. A pumping station at Carlton lifted water to Penshurst to supply the higher areas of Kogarah.
Originally, water from Woollahra Reservoir was fed back to Ashfield Reservoir (1888) to supply the higher areas in Inner West. By 1927 an additional main from Potts Hill supplied Ashfield Reservoir. The reservoir is now supplied by the City Tunnel.
Ashfield Reservoir (Elevated), (WS 3) is one of a group of four similar elevated reservoirs in the Sydney Water system, the others being Bellevue Hill Reservoir (WS 10), 1910, Drummoyne Reservoir (Elevated) (WS 38), 1910, and Penshurst Reservoir (Elevated) (WS 87), 1910.
Each reservoir is an elevated cylindrical riveted steel tank, resting on a concrete apron and supported on a steel girder frame. The perimeter of the steel stand has a facade of concrete columns and arches, which forms a decorative, rather than a structural feature. The walkway around the rim of the reservoir is attached to the outside and supported on brackets (decking planks removed).
Standard features include: handrail in tubular steel, davit, access ladder, trigonometric station, inlet and outlet valve chambers.
At its full service level of 260 feet (79.25 m), the reservoir has a capacity of 1,000,000 imp gal (4.5 ML).
Recent media
Recent media