Recent from talks
Astropulse
Knowledge base stats:
Talk channels stats:
Members stats:
Astropulse
Astropulse is a volunteer computing project to search for primordial black holes, pulsars, and extraterrestrial intelligence (ETI). Volunteer resources are harnessed through Berkeley Open Infrastructure for Network Computing (BOINC) platform. In 1999, the Space Sciences Laboratory launched SETI@home, which would rely on massively parallel computation on desktop computers scattered around the world. SETI@home utilizes recorded data from the Arecibo radio telescope and searches for narrow-bandwidth radio signals from space, signifying the presence of extraterrestrial technology. It was soon recognized that this same data might be scoured for other signals of value to the astronomy and physics community.
For about 6 years, Astropulse existed in an experimental beta testing phase not available to the general community. In July 2008, Astropulse was integrated into SETI@home, so that the massive network of SETI participants could also contribute to the search for other astronomical signals of value. Astropulse also makes contributions to the search for ET: first, project proponents believe it may identify a different type of ET signal not identified by the original SETI@Home algorithm; second, proponents believe it may create additional support for SETI by providing a second possible concrete result from the overall search project.
Final development of Astropulse has been a two-part endeavor. The first step was to complete the Astropulse C++ core that can successfully identify a target pulse. Upon completion of that program, the team created a trial dataset that contained a hidden pulse, which the completed program successfully found, thus confirming the ability of the Astropulse core to successfully identify target pulses. Since July 2008, research has focused on a series of refinements to the beta version which are then rolled out to the full universe of SETI participants. At the programming level, developers first seek to assure that new versions are compatible with a variety of platforms, after which the refined version is optimized for greater speed. As of April, 2009, Astropulse is testing beta version 5.05.
The future of the project depends on extended funding to SETI@home.
The BOINC idea is to divide (split) large blocks of data into smaller units, each of which can be distributed to individual participating work stations. To this end, the project then began to embed the Astropulse core into the SETI beta client and began to distribute real data, split into Astropulse work units, to a team of beta testers. The challenge has been to assure that the Astropulse core will work seamlessly on a broad array of operating systems. Current research focuses on implementing algorithm refinements that eliminate or reduce false positives.
Astropulse searches for both single pulses and regularly repeating pulses. This experiment represents a new strategy for SETI, postulating microsecond timescale pulses as opposed to longer pulses or narrowband signals. They may also discover pulsars and exploding primordial black holes, both of which would emit brief wideband pulses. The primary purpose of the core Astropulse algorithm is coherent de-dispersion of the microsecond radio pulses for which Astropulse is searching. Dispersion of a signal occurs as the pulse passes through the interstellar medium (ISM) plasma, because the high frequency radiation goes slightly faster than the lower frequency radiation. Thus, the signal arrives at the radio-telescope dispersed depending upon the amount of ISM plasma between the Earth and the source of the pulse. Dedispersion is computationally intensive, thus lending itself to the distributed computing model.
Astropulse utilizes the distributed computing power of SETI@home, delegating computational sub-tasks to hundreds of thousands of volunteers' computers, to gain advantages in sensitivity and time resolution over previous surveys. Wideband pulses would be "chirped" by passage through the interstellar medium; that is, high frequencies would arrive earlier and lower frequencies would arrive later. Thus, for pulses with wideband frequency content, dispersion hints at a signal's extraterrestrial origin. Astropulse searches for pulses with dispersion measures ranging from 50 pc/cm3 to 800 pc/cm−3 (chirp rates of 7000 Hz to 400 Hz per microsecond), allowing detection of sources almost anywhere within the Milky Way.
Project proponents believe that Astropulse will either detect exploding black holes, or establish a maximum rate of 5×10−14 pc−3yr−1, a factor of 104 better than any previous survey.
Hub AI
Astropulse AI simulator
(@Astropulse_simulator)
Astropulse
Astropulse is a volunteer computing project to search for primordial black holes, pulsars, and extraterrestrial intelligence (ETI). Volunteer resources are harnessed through Berkeley Open Infrastructure for Network Computing (BOINC) platform. In 1999, the Space Sciences Laboratory launched SETI@home, which would rely on massively parallel computation on desktop computers scattered around the world. SETI@home utilizes recorded data from the Arecibo radio telescope and searches for narrow-bandwidth radio signals from space, signifying the presence of extraterrestrial technology. It was soon recognized that this same data might be scoured for other signals of value to the astronomy and physics community.
For about 6 years, Astropulse existed in an experimental beta testing phase not available to the general community. In July 2008, Astropulse was integrated into SETI@home, so that the massive network of SETI participants could also contribute to the search for other astronomical signals of value. Astropulse also makes contributions to the search for ET: first, project proponents believe it may identify a different type of ET signal not identified by the original SETI@Home algorithm; second, proponents believe it may create additional support for SETI by providing a second possible concrete result from the overall search project.
Final development of Astropulse has been a two-part endeavor. The first step was to complete the Astropulse C++ core that can successfully identify a target pulse. Upon completion of that program, the team created a trial dataset that contained a hidden pulse, which the completed program successfully found, thus confirming the ability of the Astropulse core to successfully identify target pulses. Since July 2008, research has focused on a series of refinements to the beta version which are then rolled out to the full universe of SETI participants. At the programming level, developers first seek to assure that new versions are compatible with a variety of platforms, after which the refined version is optimized for greater speed. As of April, 2009, Astropulse is testing beta version 5.05.
The future of the project depends on extended funding to SETI@home.
The BOINC idea is to divide (split) large blocks of data into smaller units, each of which can be distributed to individual participating work stations. To this end, the project then began to embed the Astropulse core into the SETI beta client and began to distribute real data, split into Astropulse work units, to a team of beta testers. The challenge has been to assure that the Astropulse core will work seamlessly on a broad array of operating systems. Current research focuses on implementing algorithm refinements that eliminate or reduce false positives.
Astropulse searches for both single pulses and regularly repeating pulses. This experiment represents a new strategy for SETI, postulating microsecond timescale pulses as opposed to longer pulses or narrowband signals. They may also discover pulsars and exploding primordial black holes, both of which would emit brief wideband pulses. The primary purpose of the core Astropulse algorithm is coherent de-dispersion of the microsecond radio pulses for which Astropulse is searching. Dispersion of a signal occurs as the pulse passes through the interstellar medium (ISM) plasma, because the high frequency radiation goes slightly faster than the lower frequency radiation. Thus, the signal arrives at the radio-telescope dispersed depending upon the amount of ISM plasma between the Earth and the source of the pulse. Dedispersion is computationally intensive, thus lending itself to the distributed computing model.
Astropulse utilizes the distributed computing power of SETI@home, delegating computational sub-tasks to hundreds of thousands of volunteers' computers, to gain advantages in sensitivity and time resolution over previous surveys. Wideband pulses would be "chirped" by passage through the interstellar medium; that is, high frequencies would arrive earlier and lower frequencies would arrive later. Thus, for pulses with wideband frequency content, dispersion hints at a signal's extraterrestrial origin. Astropulse searches for pulses with dispersion measures ranging from 50 pc/cm3 to 800 pc/cm−3 (chirp rates of 7000 Hz to 400 Hz per microsecond), allowing detection of sources almost anywhere within the Milky Way.
Project proponents believe that Astropulse will either detect exploding black holes, or establish a maximum rate of 5×10−14 pc−3yr−1, a factor of 104 better than any previous survey.
Recent media