Hubbry Logo
search
logo
2044918

British Rail Class 67

logo
Community Hub0 Subscribers
Write something...
Be the first to start a discussion here.
Be the first to start a discussion here.
See all
British Rail Class 67

The Class 67 locomotives are a class of Bo-Bo diesel-electric locomotives that were built for the English Welsh & Scottish Railway (EWS) between 1999 and 2000 by Alstom at Meinfesa in Valencia, Spain with drive components (engine, generator and traction motors) from General Motors' Electro-Motive Division. 67003 was the first of the class to be scrapped at Kingsbury on May 27th 2025.

EMD's designation for this locomotive type is JT42HW-HS.

EWS ordered thirty locomotives via leasing company Angel Trains in a £45 million contract split between Alstom and Electro Motive Diesel, for use as Class 47 replacements for hauling high-speed Royal Mail trains and passenger trains. The locomotives were obtained on a 15-year lease from Angel Trains. At the end of the fifteen-year contract, ownership of the locomotives was transferred to DB Cargo UK.

The bodyshell is a monocoque load-bearing Alstom design, the bogies are an "H" frame Alstom design, the engine, traction motors and control electronics are GM-EMD products, and the same as used in the Class 66. Unlike the Class 66, the traction motors are frame mounted rather than axle hung to reduce unsprung mass and the gear ratio is increased allowing higher speeds. The cab design has a central driving position.

The locomotives are able to provide Electric Train Supply for passenger train heating and air-conditioning, and are equipped for both buffers and chain couplers and buckeye couplers, the latter attached by a swing arm mount.

High-speed running tests were undertaken with 67002 starting at Alstom's facility at La Sagra (Toledo, Spain) and running on the standard gauge Madrid-Toledo high-speed rail line. A top speed of 143 miles per hour (230 km/h) was obtained.

The first locomotive to be delivered was 67003, which arrived in October 1999. Initial plans were for a rapid acceptance into service, however, problems with the locomotives being slightly out of loading gauge caused delays. Acceptance trials began in December of that year, and all 30 units had been delivered to the UK by early 2000.

The high axle load of the locomotive caused an initial speed restriction to 110 mph (177 km/h) and modifications to the bogies were required; locomotive 67023 was passed for 125 mph (201 km/h) running in July 2001, and all 30 units had been modified by June 2003.

See all
User Avatar
No comments yet.