Community hub
Recent from talks
Knowledge base stats:
Talk channels stats:
Members stats:
Magnetic core
A magnetic core is a piece of magnetic material with a high magnetic permeability used to confine and guide magnetic fields in electrical, electromechanical and magnetic devices such as electromagnets, transformers, electric motors, generators, inductors, loudspeakers, magnetic recording heads, and magnetic assemblies. It is made of ferromagnetic metal such as iron, or ferrimagnetic compounds such as ferrites. The high permeability, relative to the surrounding air, causes the magnetic field lines to be concentrated in the core material. The magnetic field is often created by a current-carrying coil of wire around the core.
The use of a magnetic core can increase the strength of magnetic field in an electromagnetic coil by a factor of several hundred times what it would be without the core. However, magnetic cores have side effects which must be taken into account. In alternating current (AC) devices they cause energy losses, called core losses, due to hysteresis and eddy currents in applications such as transformers and inductors. "Soft" magnetic materials with low coercivity and hysteresis, such as silicon steel, or ferrite, are usually used in cores.
An electric current through a wire wound into a coil creates a magnetic field through the center of the coil, due to Ampere's circuital law. Coils are widely used in electronic components such as electromagnets, inductors, transformers, electric motors and generators. A coil without a magnetic core is called an "air core" coil. Adding a piece of ferromagnetic or ferrimagnetic material in the center of the coil can increase the magnetic field by hundreds or thousands of times; this is called a magnetic core. The field of the wire penetrates the core material, magnetizing it, so that the strong magnetic field of the core adds to the field created by the wire. The amount that the magnetic field is increased by the core depends on the magnetic permeability of the core material. Because side effects such as eddy currents and hysteresis can cause frequency-dependent energy losses, different core materials are used for coils used at different frequencies.
In some cases the losses are undesirable and with very strong fields saturation can be a problem, and an 'air core' is used. A former may still be used; a piece of material, such as plastic or a composite, that may not have any significant magnetic permeability but which simply holds the coils of wires in place.
"Soft" (annealed) iron is used in magnetic assemblies, direct current (DC) electromagnets and in some electric motors; and it can create a concentrated field that is as much as 50,000 times more intense than an air core.
Iron is desirable to make magnetic cores, as it can withstand high levels of magnetic field without saturating (up to 2.16 teslas at ambient temperature.) Annealed iron is used because, unlike "hard" iron, it has low coercivity and so does not remain magnetised when the field is removed, which is often important in applications where the magnetic field is required to be repeatedly switched.
Due to the electrical conductivity of the metal, when a solid one-piece metal core is used in alternating current (AC) applications such as transformers and inductors, the changing magnetic field induces large eddy currents circulating within it, closed loops of electric current in planes perpendicular to the field. The current flowing through the resistance of the metal heats it by Joule heating, causing significant power losses. Therefore, solid iron cores are not used in transformers or inductors, they are replaced by laminated or powdered iron cores, or nonconductive cores like ferrite.
In order to reduce the eddy current losses mentioned above, most low frequency power transformers and inductors use laminated cores, made of stacks of thin sheets of silicon steel:
Hub AI
Magnetic core AI simulator
(@Magnetic core_simulator)
Magnetic core
A magnetic core is a piece of magnetic material with a high magnetic permeability used to confine and guide magnetic fields in electrical, electromechanical and magnetic devices such as electromagnets, transformers, electric motors, generators, inductors, loudspeakers, magnetic recording heads, and magnetic assemblies. It is made of ferromagnetic metal such as iron, or ferrimagnetic compounds such as ferrites. The high permeability, relative to the surrounding air, causes the magnetic field lines to be concentrated in the core material. The magnetic field is often created by a current-carrying coil of wire around the core.
The use of a magnetic core can increase the strength of magnetic field in an electromagnetic coil by a factor of several hundred times what it would be without the core. However, magnetic cores have side effects which must be taken into account. In alternating current (AC) devices they cause energy losses, called core losses, due to hysteresis and eddy currents in applications such as transformers and inductors. "Soft" magnetic materials with low coercivity and hysteresis, such as silicon steel, or ferrite, are usually used in cores.
An electric current through a wire wound into a coil creates a magnetic field through the center of the coil, due to Ampere's circuital law. Coils are widely used in electronic components such as electromagnets, inductors, transformers, electric motors and generators. A coil without a magnetic core is called an "air core" coil. Adding a piece of ferromagnetic or ferrimagnetic material in the center of the coil can increase the magnetic field by hundreds or thousands of times; this is called a magnetic core. The field of the wire penetrates the core material, magnetizing it, so that the strong magnetic field of the core adds to the field created by the wire. The amount that the magnetic field is increased by the core depends on the magnetic permeability of the core material. Because side effects such as eddy currents and hysteresis can cause frequency-dependent energy losses, different core materials are used for coils used at different frequencies.
In some cases the losses are undesirable and with very strong fields saturation can be a problem, and an 'air core' is used. A former may still be used; a piece of material, such as plastic or a composite, that may not have any significant magnetic permeability but which simply holds the coils of wires in place.
"Soft" (annealed) iron is used in magnetic assemblies, direct current (DC) electromagnets and in some electric motors; and it can create a concentrated field that is as much as 50,000 times more intense than an air core.
Iron is desirable to make magnetic cores, as it can withstand high levels of magnetic field without saturating (up to 2.16 teslas at ambient temperature.) Annealed iron is used because, unlike "hard" iron, it has low coercivity and so does not remain magnetised when the field is removed, which is often important in applications where the magnetic field is required to be repeatedly switched.
Due to the electrical conductivity of the metal, when a solid one-piece metal core is used in alternating current (AC) applications such as transformers and inductors, the changing magnetic field induces large eddy currents circulating within it, closed loops of electric current in planes perpendicular to the field. The current flowing through the resistance of the metal heats it by Joule heating, causing significant power losses. Therefore, solid iron cores are not used in transformers or inductors, they are replaced by laminated or powdered iron cores, or nonconductive cores like ferrite.
In order to reduce the eddy current losses mentioned above, most low frequency power transformers and inductors use laminated cores, made of stacks of thin sheets of silicon steel: