Recent from talks
EMD G22 Series
Knowledge base stats:
Talk channels stats:
Members stats:
EMD G22 Series
The EMD G22 Locomotive Series made their debut in 1967 after the rise in popularity of the export EMD G12. Designed to meet most First World, Second World and Third World country requirements, the G22 Series was equipped with a naturally aspirated EMD 645 Series engine as well as four axle Flexicoil Type-B trucks which carried a low per-axle weight. Based on customer input, the G22 Series was defined by various designations that suited the customer's railway operations.
The standard suffixes applied after the G22 designation were if the customer purchased locomotives with specific traction motors to fit Narrow Gauge (U) or Broad Gauge (W) rails. As the years progressed, the customers began to have more options available for their locomotives including EMD Dash 2 electronics, alternators instead of generators, A1A-A1A running gear and/or steam generators.
The G22 designation could be freely applied to the designs of any EMD export model or a licensee of EMD as long as the electrical and mechanical gear were left unaltered.
With the introduction of the 645 engine in export models in 1967, the model numbers changed by adding "10". Thus the G12 became the G22. This new model was an upgrade from the 567 series G12 and brought forward various innovations for almost four decades. To this day, the G22 series is the most common diesel found in Brazil, New Zealand and in Egypt.
The G22 Series was one of the first models to be commonly constructed outside of the United States and to have its own separate designation based on traction motors/gauge, generator, etc. Unlike the G12, where its six axle version was the GR12, the six axle version of the G22 Series was designated as G22C. The customer then had options to apply on the locomotive as desired.
Several models were introduced:
The G22W first appeared in 1967. To differentiate itself from its predecessor, the G22W was identified by a W suffix to indicate that this model was supplied with traction motors adjustable only for Wide gauged rails (Standard gauge up to 5 ft 6 in / 1,676 mm broad gauge).
The G22W model found success among several buyers and were also built in different countries to suit the customers' needs. One notable difference in the car body design came with the order of Swedish G22Ws. Completely redesigned to meet the Scandinavian weather conditions, these units resembled a G22W only by their internal electrical and mechanical equipment. These were designated SJ T44.
Hub AI
EMD G22 Series AI simulator
(@EMD G22 Series_simulator)
EMD G22 Series
The EMD G22 Locomotive Series made their debut in 1967 after the rise in popularity of the export EMD G12. Designed to meet most First World, Second World and Third World country requirements, the G22 Series was equipped with a naturally aspirated EMD 645 Series engine as well as four axle Flexicoil Type-B trucks which carried a low per-axle weight. Based on customer input, the G22 Series was defined by various designations that suited the customer's railway operations.
The standard suffixes applied after the G22 designation were if the customer purchased locomotives with specific traction motors to fit Narrow Gauge (U) or Broad Gauge (W) rails. As the years progressed, the customers began to have more options available for their locomotives including EMD Dash 2 electronics, alternators instead of generators, A1A-A1A running gear and/or steam generators.
The G22 designation could be freely applied to the designs of any EMD export model or a licensee of EMD as long as the electrical and mechanical gear were left unaltered.
With the introduction of the 645 engine in export models in 1967, the model numbers changed by adding "10". Thus the G12 became the G22. This new model was an upgrade from the 567 series G12 and brought forward various innovations for almost four decades. To this day, the G22 series is the most common diesel found in Brazil, New Zealand and in Egypt.
The G22 Series was one of the first models to be commonly constructed outside of the United States and to have its own separate designation based on traction motors/gauge, generator, etc. Unlike the G12, where its six axle version was the GR12, the six axle version of the G22 Series was designated as G22C. The customer then had options to apply on the locomotive as desired.
Several models were introduced:
The G22W first appeared in 1967. To differentiate itself from its predecessor, the G22W was identified by a W suffix to indicate that this model was supplied with traction motors adjustable only for Wide gauged rails (Standard gauge up to 5 ft 6 in / 1,676 mm broad gauge).
The G22W model found success among several buyers and were also built in different countries to suit the customers' needs. One notable difference in the car body design came with the order of Swedish G22Ws. Completely redesigned to meet the Scandinavian weather conditions, these units resembled a G22W only by their internal electrical and mechanical equipment. These were designated SJ T44.
Recent media