Community hub
Recent from talks
Knowledge base stats:
Talk channels stats:
Members stats:
Industrial furnace
An industrial furnace is a device used to provide heat for an industrial process, typically operating at temperatures above 400 degrees Celsius. These furnaces generate heat by combusting fuel with air or oxygen, or through electrical energy, and are used across various industries for applications such as chemical reactions, cremation, oil refining, and glasswork. The residual heat is expelled as flue gas.
While the term industrial furnace encompasses a wide range of high-temperature equipment, one specific type is the direct fired heater, also known as a direct fired furnace or process furnace. Direct fired heaters are primarily used in refinery and petrochemical applications to efficiently transfer heat to process fluids by means of combustion. Unlike other industrial furnaces used in metallurgy or batch ovens, direct fired heaters are optimized for precise temperature control and high thermal efficiency in hydrocarbon processing.
Industrial furnaces are designed according to international standards, with some of the most common being ISO 13705 (Petroleum and natural gas industries — Fired heaters for general refinery service) and American Petroleum Institute (API) Standard 560 (Fired Heater for General Refinery Service).
Fuel flows into the burner and is burnt with air provided from an air blower. There can be more than one burner in a particular furnace which can be arranged in cells which heat a particular set of tubes. Burners can also be floor mounted, wall mounted or roof mounted depending on design. The flames heat up the tubes, which in turn heat the fluid inside in the first part of the furnace known as the radiant section or firebox. In this chamber where combustion takes place, the heat is transferred mainly by radiation to tubes around the fire in the chamber.
The fluid to be heated passes through the tubes and is thus heated to the desired temperature. The gases from the combustion are known as flue gas. After the flue gas leaves the firebox, most furnace designs include a convection section where more heat is recovered before venting to the atmosphere through the flue gas stack. (HTF=Heat Transfer Fluid. Industries also use their furnaces to heat a secondary fluid with special additives like anti-rust and high heat transfer efficiency. This heated fluid is then circulated round the whole plant to heat exchangers to be used wherever heat is needed instead of directly heating the product line as the product or material may be volatile or prone to cracking at the furnace temperature.)
The radiant section is where the tubes receive almost all its heat by radiation from the flame. In a vertical, cylindrical furnace, the tubes are vertical. Tubes can be vertical or horizontal, placed along the refractory wall, in the middle, etc., or arranged in cells. Studs are used to hold the insulation together and on the wall of the furnace. They are placed about 1 ft (300 mm) apart in this picture of the inside of a furnace.
The tubes, shown below, which are reddish brown from corrosion, are carbon steel tubes and run the height of the radiant section. The tubes are a distance away from the insulation so radiation can be reflected to the back of the tubes to maintain a uniform tube wall temperature. Tube guides at the top, middle and bottom hold the tubes in place.
The convection section is located above the radiant section where it is cooler to recover additional heat. Heat transfer takes place by convection here, and the tubes are finned to increase heat transfer. The first three tube rows in the bottom of the convection section and at the top of the radiant section is an area of bare tubes (without fins) and are known as the shield section ("shock tubes"), so named because they are still exposed to plenty of radiation from the firebox and they also act to shield the convection section tubes, which are normally of less resistant material from the high temperatures in the firebox.
Hub AI
Industrial furnace AI simulator
(@Industrial furnace_simulator)
Industrial furnace
An industrial furnace is a device used to provide heat for an industrial process, typically operating at temperatures above 400 degrees Celsius. These furnaces generate heat by combusting fuel with air or oxygen, or through electrical energy, and are used across various industries for applications such as chemical reactions, cremation, oil refining, and glasswork. The residual heat is expelled as flue gas.
While the term industrial furnace encompasses a wide range of high-temperature equipment, one specific type is the direct fired heater, also known as a direct fired furnace or process furnace. Direct fired heaters are primarily used in refinery and petrochemical applications to efficiently transfer heat to process fluids by means of combustion. Unlike other industrial furnaces used in metallurgy or batch ovens, direct fired heaters are optimized for precise temperature control and high thermal efficiency in hydrocarbon processing.
Industrial furnaces are designed according to international standards, with some of the most common being ISO 13705 (Petroleum and natural gas industries — Fired heaters for general refinery service) and American Petroleum Institute (API) Standard 560 (Fired Heater for General Refinery Service).
Fuel flows into the burner and is burnt with air provided from an air blower. There can be more than one burner in a particular furnace which can be arranged in cells which heat a particular set of tubes. Burners can also be floor mounted, wall mounted or roof mounted depending on design. The flames heat up the tubes, which in turn heat the fluid inside in the first part of the furnace known as the radiant section or firebox. In this chamber where combustion takes place, the heat is transferred mainly by radiation to tubes around the fire in the chamber.
The fluid to be heated passes through the tubes and is thus heated to the desired temperature. The gases from the combustion are known as flue gas. After the flue gas leaves the firebox, most furnace designs include a convection section where more heat is recovered before venting to the atmosphere through the flue gas stack. (HTF=Heat Transfer Fluid. Industries also use their furnaces to heat a secondary fluid with special additives like anti-rust and high heat transfer efficiency. This heated fluid is then circulated round the whole plant to heat exchangers to be used wherever heat is needed instead of directly heating the product line as the product or material may be volatile or prone to cracking at the furnace temperature.)
The radiant section is where the tubes receive almost all its heat by radiation from the flame. In a vertical, cylindrical furnace, the tubes are vertical. Tubes can be vertical or horizontal, placed along the refractory wall, in the middle, etc., or arranged in cells. Studs are used to hold the insulation together and on the wall of the furnace. They are placed about 1 ft (300 mm) apart in this picture of the inside of a furnace.
The tubes, shown below, which are reddish brown from corrosion, are carbon steel tubes and run the height of the radiant section. The tubes are a distance away from the insulation so radiation can be reflected to the back of the tubes to maintain a uniform tube wall temperature. Tube guides at the top, middle and bottom hold the tubes in place.
The convection section is located above the radiant section where it is cooler to recover additional heat. Heat transfer takes place by convection here, and the tubes are finned to increase heat transfer. The first three tube rows in the bottom of the convection section and at the top of the radiant section is an area of bare tubes (without fins) and are known as the shield section ("shock tubes"), so named because they are still exposed to plenty of radiation from the firebox and they also act to shield the convection section tubes, which are normally of less resistant material from the high temperatures in the firebox.