Intelligent Mail barcode
Intelligent Mail barcode
Main page
1350880

Intelligent Mail barcode

logo
Community Hub0 subscribers

Wikipedia

Intelligent Mail barcode
View on Wikipedia
from Wikipedia
A possible Intelligent Mail Barcode for the Wikimedia Foundation address

The Intelligent Mail Barcode (IMb) is a 65-bar barcode for use on mail in the United States.[1] The term "Intelligent Mail" refers to services offered by the United States Postal Service for domestic mail delivery. The IM barcode is intended to provide greater information and functionality than its predecessors POSTNET and PLANET. An Intelligent Mail barcode has also been referred to as a One Code Solution and a 4-State Customer Barcode, abbreviated 4CB, 4-CB or USPS4CB. The complete specification can be found in USPS Document USPS-B-3200.[2] It effectively incorporates the routing ZIP Code and tracking information included in previously used postal barcode standards.

The barcode is applied by the sender; the Postal Service required use of the Intelligent Mail barcode to qualify for automation prices beginning January 28, 2013.[3] Use of the barcode provides increased overall efficiency, including improved deliverability, and new services.

Symbology

[edit]
examples of the symbols for a tracker, ascender, descender, and full bar in an Intelligent Mail barcode.
The four types of symbols in an Intelligent Mail barcode

The Intelligent Mail barcode is a height-modulated barcode that encodes up to 31 decimal digits of mail-piece data into 65 vertical bars.[2]

The code is made up of four distinct symbols, which is why it was once referred to as the 4-State Customer Barcode. Each bar contains the central "tracker" portion, and may contain an ascender, descender, neither, or both (a "full bar").

The 65 bars represent 130 bits (or 39.13 decimal digits), grouped as ten 13-bit characters. Each character has 2, 5, 8, or 11 of its 13 bits set to one. The Hamming distance between characters is at least 2. Consequently, single-bit errors in a character can be detected (toggling one bit results in an invalid character). The characters are interleaved throughout the symbol.

The number of characters can be calculated from the binomial coefficient.

The total number of characters is two times 1365, or 2730. Log2(2730) is 11.41469 bits per group. So the 65 bars (or 130 bits) encode a 114-bit message.

The encoding includes an eleven-bit cyclic redundancy check (CRC) to detect, but not correct, errors. Subtracting the 11 CRC bits from the 114-bit message leaves an information payload of 103 bits (the specification sets one of those bits to zero). Consequently, 27 of the 130 bits are devoted to error detection.

Data payload

[edit]

The IM barcode carries a data payload of up to 31 digits representing the following elements:

Intelligent Mail barcode components
Index of first digit Length Name
1 2 Barcode identifier
3 3 Service type identifier
6 6 or 9 Mailer ID
12 or 15 9 or 6 Sequence number
21 0, 5, 9, or 11 ZIP (routing) code

Barcode identifier

[edit]

A barcode identifier is assigned by the United States Postal Service to encode the presort identification that is currently printed in human-readable form on the optional endorsement line (OEL). It is also available for future United States Postal Service use. This is accomplished using two digits, with the second digit in the range of 0–4. The allowable encoding ranges are 00–04, 10–14, 20–24, 30–34, 40–44, 50–54, 60–64, 70–74, 80–84, and 90–94.

The first digit of the barcode identifier is defined as:

Value OEL description
0x Default / no OEL information
1x Carrier route (CR), enhanced carrier route (ECR), and FIRM
2x 5-digit/scheme
3x 3-digit/scheme
4x Area distribution center (ADC)
5x Mixed area distribution center (MADC), origin mixed ADC (OMX)

Service type identifier (STID)

[edit]

A three-digit value represents both the class of the mail (such as first-class, standard mail, or periodical), and any services requested by the sender.

Basic STIDs, for the purpose of automation only, are as follows:

Value STID description
300 First-class mail with no services
261 Standard mail with no services
040 First-class mail, basic option with destination IMb tracing[4]
042 Standard mail, basic option with destination IMb tracing[4]
044 Periodicals with manual address correction
401 Bound printed matter with no services
708 Business reply mail with no services
710 Priority mail with no services
712 Priority mail flat rate with no services

For a detailed list of STIDs, see Appendix A of the USPS Guide to Intelligent Mail Letters and Flats[5] or Service Type Identifiers.[6]

Mailer ID

[edit]

A 6- or 9-digit number assigned by the United States Postal Service identifies the specific business sending the mailing. Higher-volume mailers are eligible to receive 6-digit mailer IDs, which have a larger range of associated sequence numbers; lower-volume mailers receive 9-digit mailer IDs. To make it possible to distinguish 6-digit IDs from 9-digit IDs, all 6-digit IDs begin with a digit between 0 and 8 inclusive, while all 9-digit IDs begin with the digit 9.

Sequence number

[edit]

A mailer-assigned 6- or 9-digit ID specific to one piece of mail, to identify the specific recipient or household. The mailer must ensure that this number remains unique for a 45-day period after the mail is sent if a full service discount is claimed; otherwise, it does not have to be unique. The sequence number is either 6 or 9 digits, based on the length of the mailer ID. If the mailer ID is 6 digits long, then the sequence number is 9 digits long, and conversely, so that there will always be 15 digits in total when the mailer ID and the sequence number are combined.

Delivery-point ZIP code

[edit]

This section of the code may be omitted, but if it is present, the 5-, 9-, or 11-digit forms of the ZIP Code are also encoded in the Intelligent Mail barcode. The full 11-digit form includes the standard 5-digit ZIP code, the ZIP + 4 code, and a 2-digit code indicating the exact delivery point. This is the same information that was encoded in the POSTNET barcode, which the Intelligent Mail barcode replaces.

References

[edit]
[edit]

Grokipedia

Intelligent Mail barcode

View on Grokipedia
from Grokipedia
The Intelligent Mail barcode (IMb), also referred to as the 4-State Customer Barcode, is a 65-bar postal barcode symbology developed by the United States Postal Service (USPS) for encoding routing, tracking, and service information on letters and flats to enable automated sorting and enhanced visibility in the mailstream.[1] This height-modulated barcode uses four distinct bar states—full, ascender (top half), descender (bottom half), and tracker (no ink)—to represent data more efficiently than earlier two-state barcodes, allowing mailers to apply a single code that supports multiple USPS programs simultaneously.[2] The IMb evolved from the USPS's earlier POSTNET barcode, introduced in the 1980s for ZIP Code sorting, and the PLANET Code, added in 1999 for delivery point confirmation and tracking.[2] Development of the Intelligent Mail Program, with the IMb as its core component, began in 2003 to address growing demands for mailpiece-level visibility and streamlined processing.[3] The barcode was officially introduced in September 2006, with phased implementation beginning in 2009 and becoming required for automation-priced letters and flats to qualify for postage discounts by 2014.[4][2] Key to the IMb's functionality are its five data elements: a two-digit barcode identifier for presort details; a three-digit service type identifier (STID) indicating mail class, extra services, and endorsements; a six-, nine-, or eleven-digit mailer identifier (MID) unique to the sender; a nine-digit serial or sequence number for individual mailpiece tracking (up to one billion per job); and the 11-digit delivery point ZIP Code for routing.[2] Mailers must obtain a MID from the USPS and ensure barcode quality through testing or certified software to achieve high read rates on automated equipment.[1] The IMb enables services like Full-Service Intelligent Mail for detailed reporting and move update validation, as well as Basic and Non-Automation options for simpler mailings, and is required for classes including First-Class Mail, Periodicals, and USPS Marketing Mail.[1] A related variant, the Intelligent Mail Package Barcode (IMpb), applies similar principles to parcels and was mandated for all commercial packages, including Priority Mail and Certified Mail, starting January 25, 2015, to support end-to-end tracking and visibility; in November 2024, USPS announced requirements effective November 2025 for a supplemental GS1-DataMatrix Intelligent Mail matrix barcode (IMmb) on domestic shipping labels.[5][6] Overall, the Intelligent Mail system has significantly improved USPS operational data collection, with billions of scans processed annually to optimize delivery and reduce costs.[3]

Overview and History

Definition and Purpose

The Intelligent Mail barcode (IMb) is a 65-bar, 4-state symbology barcode developed by the United States Postal Service (USPS) for encoding comprehensive mailpiece information on letters, flats, and cards.[1] It integrates data elements such as the mailer identifier, serial number, and delivery point to uniquely identify each piece of mail throughout the postal network.[1] The primary purpose of the IMb is to facilitate automated sorting, routing, and end-to-end tracking of mailpieces by combining sender and recipient information into a single, versatile barcode.[1] This design supports multiple postal services simultaneously, including address correction, delivery confirmation, and electronic return of undeliverable mail, thereby improving operational efficiency and reducing manual processing.[4] By replacing the earlier POSTNET and PLANET barcodes with a more advanced format, the IMb enhances overall mail visibility for both the USPS and mailers.[1] In key applications, the IMb is required on automation-priced mail classes such as First-Class Mail, Periodicals, and USPS Marketing Mail to qualify for postage discounts, enabling mailers to access detailed tracking data through USPS web tools and reporting systems.[1] Officially launched in September 2006 as part of the broader Intelligent Mail program, it was introduced to modernize mail processing and provide greater transparency in the movement of mailpieces.[4]

Development and Introduction

The development of the Intelligent Mail barcode originated in 2003 as part of the United States Postal Service's (USPS) broader Intelligent Mail Program, aimed at overcoming the limitations of legacy barcodes such as POSTNET and PLANET Code, which lacked sufficient capacity for comprehensive tracking and service data.[3] In January 2003, USPS established the Intelligent Mail and Address Quality organization. In May 2003, USPS published the Intelligent Mail Corporate Plan to drive the initiative toward end-to-end mail visibility and improved operational efficiency.[7] This effort was motivated by the need to enhance mail processing accuracy, reduce errors in sorting and delivery, and enable electronic verification of postage and services, ultimately supporting better resource allocation and customer insights.[8] Testing phases for the barcode and supporting infrastructure occurred between 2004 and 2005, including prototype evaluations of the 4-state barcode symbology and live mail trials to ensure compatibility with automated sorting equipment.[9] These pilots focused on validating the barcode's ability to encode expanded information, such as mailer identifiers and service types, while integrating with emerging systems like wide-field-of-view cameras for scanning.[10] By 2005, key components like the OneCode Solution barcode design—featuring three times the data capacity of POSTNET—were finalized, paving the way for broader rollout.[8] The Intelligent Mail barcode was publicly launched in September 2006, allowing mailers to voluntarily adopt it for letters and flats as a replacement for existing barcodes.[3] Implementation milestones accelerated with USPS Federal Register notices in 2008: a proposed rule on April 30 outlined standards for basic and full-service options, followed by a final rule on August 21 that detailed phased adoption.[11] Although initially planned for mandatory use to qualify for automation prices starting January 2009, the requirement was adjusted to May 11, 2009, for certain categories like automation flats, with further phases in 2010 and 2011.[12] Full transition from POSTNET and PLANET occurred by January 28, 2013, when legacy barcodes were retired for all automation-eligible mail.[13] A critical aspect of the rollout involved integration with the Mailer Visibility Information and Management System (MVIMS), which facilitated electronic data reporting from mailers to USPS, enabling real-time tracking and performance metrics as part of the program's visibility goals.[3] This system supported the barcode's role in aggregating scan data across the mailstream, aligning with the Postal Accountability and Enhancement Act's requirements for service monitoring.[7]

Technical Specifications

Symbology

The Intelligent Mail barcode (IMb) employs a 4-state symbology, a height-modulated barcode format that encodes up to 31 digits of mailpiece data into 65 vertical bars.[14] This structure consists of two frame bars and 63 data bars, where the frame bars serve as start and stop patterns to facilitate scanner orientation and synchronization during reading.[14] Each bar represents one of four possible height levels, enabling the encoding of two bits of information per bar: a full bar (both ascender and descender elements present, encoding 11), an ascender bar (tracker and ascender elements, encoding 10), a descender bar (tracker and descender elements, encoding 01), or a tracker bar (tracker element only, encoding 00).[14] The encoding scheme begins with converting the numeric payload into binary form, which is then grouped into pairs and mapped to the corresponding 4-state symbols to form the barcode pattern.[14] This process generates a sequence of 65 symbols (F for full, A for ascender, D for descender, T for tracker), ensuring the data is compactly represented within the fixed bar count.[15] For error detection and validation, the symbology incorporates an 11-bit cyclic redundancy check (CRC) as a check digit within the payload, which verifies the integrity of the encoded information during scanning.[14] Additionally, redundancy is achieved through the interleaving of tracking codes (20 digits) and routing codes (0, 5, 9, or 11 digits), allowing partial readability even if portions of the barcode are damaged.[14] Compared to earlier binary barcodes like the POSTNET, which uses a 2-state symbology (tall or short bars encoding 1 bit per bar), the IMb's 4-state design provides denser encoding at 2 bits per bar, supporting more information in a similar physical space while maintaining compatibility with automated postal sorting equipment.[14][15]

Physical Dimensions and Printing

The Intelligent Mail barcode (IMb) utilizes a 4-state symbology with 65 vertical bars, each capable of representing one of four states: full bar, ascender, tracker, or descender, to ensure reliable scanning by USPS equipment.[16] The physical dimensions are precisely defined to maintain scannability, with total bar heights varying by state as per USPS-B-3200: the tracker bar 0.039–0.065 inches, ascender and descender bars approximately 0.100–0.130 inches (positioned to include the tracker element plus extension), and full bars 0.125–0.165 inches.[17][18] Minimum bar width is 0.020 inches, resulting in an overall barcode length of approximately 2.83 inches for the 65 bars at the nominal pitch of 22 bars per inch, though lengths between 2.667 and 3.225 inches are permitted to accommodate printing variations.[18][19] Printing tolerances are strict to prevent read errors, allowing ±0.005 inches for bar widths and ±0.020 inches for full bar heights, which equates to roughly ±25% for widths and ±12-16% for heights depending on the nominal value.[18] Quiet zones must extend at least 0.125 inches horizontally on both sides of the barcode and 0.028 inches vertically above and below to isolate it from surrounding print elements.[18] Ink reflectivity standards require a background reflectance of at least 50% in red light and 45% in green light, with a print reflectance difference (PRD) of at least 30% between bars and background to ensure contrast for optical scanners.[18] Placement guidelines mandate that the barcode be printed parallel to the bottom edge of the mailpiece, with at least 0.125 inches clearance from all edges on flats and positioned within the address block or a designated 4-by-5/8-inch barcode clear zone in the lower right on letters.[20][19] The IMb is compatible with thermal transfer, inkjet, and laser printing technologies, provided the output meets machine-readable standards without manual alterations.[19] Quality metrics are governed by the USPS-B-3200 specification, which requires a minimum ANSI barcode grade of C (with at least 70% of elements graded A or B) and supports resolutions of 300 DPI or higher for optimal print quality, though 600 DPI is recommended for high-volume production to minimize edge raggedness.[18][16] Mailers must verify compliance using certified barcode verifiers to confirm dimensions, contrast, and modulation before entering the mailstream.[19]
DimensionNominal ValueToleranceSource
Bar Width0.020 inches±0.005 inchesUSPS-B-3200
Full Bar Height0.145 inches±0.020 inchesUSPS-B-3200
Overall Length (65 bars)~2.83 inches2.667–3.225 inchesUSPS-B-3200
Horizontal Quiet Zone0.125 inchesMinimumUSPS-B-3200
Vertical Quiet Zone0.028 inchesMinimumUSPS-B-3200

Data Encoding

Overall Structure

The Intelligent Mail barcode encodes its data in a structured numeric string of up to 31 digits, represented by 65 vertical bars using a 4-state symbology that expands the information into 65 distinct symbols for reliable scanning. This string begins with a 2-digit Barcode ID, followed by the Service Type Identifier (3 digits), Mailer ID (variable 6 or 9 digits), and Serial Number (variable 9 or 6 digits to complete a fixed 20-digit tracking code), with an optional routing code appended consisting of the delivery point ZIP Code (0, 5, 9, or 11 digits). The tracking code provides unique identification for mailpiece tracking, while the routing code supplies address-specific delivery information when present, resulting in total lengths of 20, 25, 29, or 31 digits padded with leading zeros to standardize processing.[21] The encoding process transforms the 31-digit string into a binary format of 102 data bits, augmented by framing bits to guide scanner orientation and error detection, before mapping to the 4-state bar heights (full bar, ascender, tracker, descender) via predefined lookup tables that group bits into codewords for each symbol. Specifically, the digits form a large integer that is encoded into 10 codewords using predefined lookup tables with specific value ranges (e.g., 0–658, 0–1364, 0–1270), which are then adjusted for the frame check sequence and orientation before final bar assignment, ensuring the barcode's compactness and robustness against printing errors. The tracking code occupies the initial 20 digits, encompassing all fixed and variable fields for sender and service details, while the routing code forms the trailing portion for destination routing.[14] Field lengths within the tracking code are mostly fixed to facilitate consistent parsing: the Barcode ID is always 2 digits, the Service Type ID is 3 digits, the Mailer ID varies between 6 and 9 digits depending on the mailer's assigned identifier, and the Serial Number adjusts to 9 or 6 digits respectively to maintain the 20-digit total. This variability allows flexibility for different mailer profiles while keeping the core structure uniform; for instance, smaller mailers use a 6-digit Mailer ID paired with a longer 9-digit Serial Number for granularity in tracking individual pieces. The routing code's length varies based on the precision of the delivery point information provided, from none (for certain bulk mail) to 11 digits including ZIP+4 and 2-digit delivery point extension.[16] Individual field meanings, such as specific values for the Service Type ID, are detailed in the payload components section.[22]

Payload Components

The payload of the Intelligent Mail barcode consists of up to 31 numeric digits divided into a 20-digit tracking code and an optional 0- to 11-digit routing code, enabling piece-level identification and routing.[21] The Barcode Identifier is a 2-digit field that specifies the version and format of the barcode, such as "00" for standard letters and flats under automation compatibility, or values like "10" to "94" indicating specific presort levels or source channels (mailer or postal). This field ensures the correct decoding and processing of the barcode based on the mailing program's requirements.[21] The Service Type Identifier (STID) is a 3-digit code that defines the mail class and enabled services through binary flags supporting up to eight options, such as address correction or tracking. For instance, "000" denotes basic service without additional features, while "451" indicates Full-Service with piece-level confirmation for enhanced visibility. The STID determines eligibility for discounts and special handling, with valid values listed in the official USPS table.[23][21] The Mailer ID is a 6- or 9-digit unique identifier assigned by the USPS to the mailer or licensee via the Business Customer Gateway, padded with leading zeros if shorter than the required length to fit the tracking code structure. This field links the mailpiece to the originating entity for accountability and reporting.[21] The Serial Number is a 9-digit (with 6-digit Mailer ID) or 6-digit (with 9-digit Mailer ID) sequential value assigned by the mailer to uniquely identify each piece within a job or mailing, often resetting per run for manageability. Serial numbers must remain unique for at least 45 days when using the same Mailer ID. It facilitates individual tracking without requiring recipient-specific data in all cases.[21][16] The Delivery-Point ZIP Code is an optional field of 0, 5, 9, or 11 digits representing the recipient's ZIP Code, ZIP+4, or full delivery point code (ZIP Code, ZIP+4, delivery point, and check digit); if absent, the barcode operates in routing-only mode without final delivery routing. This component supports precise sorting to the carrier route or delivery point when included.[21] Error checking is integrated via an 11-bit Frame Check Sequence (FCS) appended to the 102-bit binary representation of the tracking and routing codes, calculated using a cyclic redundancy check (CRC) polynomial of 0xF35 to detect transmission errors during scanning. This mechanism verifies the integrity of the entire payload without adding extra digits to the 31-digit structure.[21]

Usage and Implementation

Requirements for Mailers

The Intelligent Mail barcode (IMb) is required for all automation-priced letters and flats in First-Class Mail, Periodicals, and USPS Marketing Mail, a mandate that took effect in January 2009 to qualify for postal discounts.[1] This applies specifically to pieces claiming automation rates, such as those using presort or carrier route pricing, while it remains optional for non-automation mail but is recommended to enable basic tracking capabilities.[1] The requirement ensures that mailpieces include comprehensive routing and tracking data, replacing older barcodes like POSTNET for eligibility.[24] Mailers must register to obtain a unique Mailer ID (MID), a 6- or 9-digit identifier assigned based on mailing volume, through the USPS Business Customer Gateway or by contacting the PostalOne! Help Desk.[24][25] Serial numbers within the barcode's tracking code are then managed by the mailer for each job to maintain uniqueness, typically for 45 days across mailings, preventing duplication in the USPS system.[26] For example, the MID is encoded in the barcode's payload as the first component of the tracking code, linking all pieces to the mailer's account.[24] Compliance standards mandate that barcodes meet specific technical criteria, including a minimum ANSI grade C quality (70% of scans at A or B), appropriate reflectance values (at least 50% for red and 45% for green on the background), and placement tolerances such as a maximum skew of ±5° for letters.[24] Barcodes must pass USPS verification during processing, and for discount eligibility—particularly under Full-Service options—mailers are required to submit electronic documentation (eDoc) via formats like Mail.dat or Mail.xml through approved systems.[27] This eDoc submission replaces paper manifests and includes details on mailpiece counts, postage, and barcode data to streamline verification.[26] Testing and certification involve using USPS-approved encoders and software from certified vendors listed on PostalPro to generate compliant barcodes.[1] Mailers preparing Full-Service mailings must undergo periodic quality audits, monitoring scan rates and error logs via the Mailer Scorecard on the Business Customer Gateway, with certification available after 90 days of consistent submissions.[28] Optional equipment testing can be requested through the National Customer Support Center to validate printing systems.[24] No major changes to IMb requirements for letter and flat mailers have occurred since the 2013 phase-out of legacy barcodes like POSTNET, which ended price eligibility for non-IMb pieces on January 27, 2013.[29] As of 2025, mailers must integrate IMb generation with electronic postage systems, such as those supporting Intelligent Mail for Small Business (IMsb) tools, to ensure seamless compliance for low-volume operations.[30]

Service Levels and Tracking

The Intelligent Mail barcode enables two primary service levels for mailers: Basic and Full-Service, each configured via the Service Type Identifier (STID) field to determine the scope of postal services and data access.[31] The Basic level provides minimal functionality, including optional scan data access through Informed Visibility Mail Tracking & Reporting (IV-MTR) but no electronic address correction or move update compliance verification, suitable for mailings without advanced reporting needs.[31][32] Full-Service, the most comprehensive option, includes free OneCode Address Correction Service (ACS) for qualified mailers, detailed scan data, move update verification, and quality feedback on mailpiece performance, eliminating certain permit and correction fees while maximizing tracking capabilities.[33][31] Tracking occurs through USPS scans of the barcode at key points, including mail entry facilities, processing and sorting centers, and delivery units, capturing movement data as pieces progress through the network.[1][34] Mailers gain visibility into this data via online portals like IV-MTR, which aggregates scan events for individual pieces, bundles, or containers, supporting end-to-end monitoring from induction to delivery.[32] This mechanism allows mailers to track exceptions, such as delays or misroutes, and integrate with business systems for operational insights.[32] Post-mailing data reporting is delivered electronically to mailers through IV-MTR or Mail.XML files, providing metrics on delivery times, scan histories, address corrections, and exception events to inform mailing strategies and customer communications.[32][35] These reports enable analysis of service performance without manual intervention, with Full-Service users receiving enhanced details including quality metrics on barcode readability and processing efficiency.[33] The STID plays a central role in configuring these services, as a three-digit code within the barcode that specifies the desired level and options, such as STID 700 for Basic service in certain cases like ballot mail with no IV-MTR, or STIDs in the 910-919 range for Full-Service with integrated features including ACS.[31][36] It also facilitates ancillary services, such as Signature Confirmation, by encoding requests for proof-of-delivery signatures alongside core tracking.[37][31]

Advantages and Comparisons

Benefits over Previous Systems

The Intelligent Mail barcode provides enhanced visibility into the mail stream by enabling piece-level tracking of individual mailpieces, a significant improvement over previous systems that offered only bulk or container-level tracking. This granular tracking allows the United States Postal Service (USPS) to monitor mail movement more precisely from acceptance to delivery, reducing the incidence of lost or undeliverable mail through better identification and recovery processes.[38][3] In terms of cost savings, the barcode qualifies mailers for automation discounts on eligible categories such as First-Class Mail, Periodicals, and USPS Marketing Mail, with Full-Service implementation offering an additional $0.005 per piece for First-Class Mail and USPS Marketing Mail letters and flats, and $0.001 per piece for Periodicals, as of July 2025. These incentives streamline USPS processing by integrating routing and tracking data, which cuts handling time at sorting facilities and lowers overall operational costs for both mailers and the postal system.[3][38][39] A key advantage is service integration, as the Intelligent Mail barcode consolidates functionality from legacy systems like the POSTNET code for routing and the PLANET code for tracking into a single, more versatile symbology that supports multiple add-on services simultaneously without requiring separate barcodes. This unification simplifies preparation for mailers and enhances compatibility with USPS programs for address correction and confirmation services.[38][2] The barcode also facilitates advanced data analytics, allowing mailers to access detailed reports on delivery performance, including scan events and service metrics through tools like the Mailer Visibility Portal. Under the Full-Service option, it provides comprehensive reporting on address quality and mailpiece movement, enabling up to 100% visibility for electronic documentation submissions and supporting informed decisions on mailing strategies.[40][38] Widespread adoption has further amplified these benefits; by the first half of fiscal year 2013, approximately 82% of commercial mail volume used Basic or Full-Service Intelligent Mail barcodes, and as of fiscal year 2025, adoption rates exceed 95% for eligible commercial mail, leading to improved overall delivery efficiency and service consistency across the network.[3]

Comparison to Related Barcodes

The Intelligent Mail barcode (IMb) differs significantly from its predecessor, the POSTNET barcode, in structure and functionality. While POSTNET is a two-state barcode using tall and short bars to encode only delivery point routing information—typically 32 bars for a 5-digit ZIP Code, 52 bars for ZIP+4, or 62 bars for delivery point barcodes (DPBC)—the IMb employs a 65-bar, four-state symbology (full bar, ascender, tracker, and descender) that combines routing data with additional elements like sender identification and service indicators, enabling piece-level tracking.[41][42][1] Similarly, the IMb supersedes the PLANET barcode, which is also a two-state, height-modulated code encoding 12- or 14-digit sender and mail class information in approximately 62 to 72 bars, primarily for confirmations and tracking without routing details. The IMb integrates PLANET's sender code—derived from an 11-digit Mailer ID and serial number—directly into its 31-digit numeric payload, eliminating the need for separate barcodes on mailpieces and allowing a single symbology to handle both routing and sender tracking.[43][44][1] In comparison to other Intelligent Mail variants for non-letter mail, the IMb is optimized for letters and flats as a linear four-state barcode, whereas the Intelligent Mail Package barcode (IMpb) targets parcels with a 31-character alphanumeric string encoded in a linear format suitable for larger labels, and the Intelligent Mail Container barcode (IMcb) uses a shorter 21-character code on pallet and tray labels for aggregate tracking. The IMb's higher density—encoding 2 bits per bar via four states—supports more comprehensive data in a compact form compared to the application-specific lengths of IMpb (up to 31 characters) and IMcb, though all share the core Intelligent Mail framework for enhanced visibility.[16][45][46] A notable evolution is the Intelligent Mail Matrix barcode (IMmb), a two-dimensional DataMatrix symbology with technical specifications released in 2024 and mandatory use required starting January 19, 2025, for certain parcels such as HAZMAT shipments and April 1, 2025, for all commercial packages, encoding the same 31-character data as the IMpb but in a more robust, space-efficient format that improves scan reliability on distorted labels, unlike the linear IMb used for flats and letters. Key distinctions include the IMb's mandatory status since 2009 for automation-eligible letters and flats—now the enduring standard as of 2025—while POSTNET and PLANET were fully phased out by January 2013, rendering them ineligible for tracking or discounts, and variants like IMpb, IMcb, and IMmb remain specialized for packages and containers.[47][48][16]

References

  1. Intelligent Mail® Barcode | PostalPro
  2. Intelligent Mail Barcode Service Talk - About USPS home
  3. [PDF] Intelligent Mail Barcode Development and Use of Data Audit Report
  4. Total Mail Visibility - About USPS home
  5. Intelligent Mail® Package Barcode (IMpb) Resources - PostalPro
  6. [PDF] GAO-09-599 U.S. Postal Service: Intelligent Mail Benefits May Not ...
  7. M. Intelligent Mail - Chapter 2 - Postal Operations
  8. 2. Enabling Infrastructure - Chapter 2 Postal Operations
  9. 2003 Comprehensive Statement on Postal Operations
  10. Implementation of New Standards for Intelligent Mail Barcodes
  11. Federal Register Notices | Postal Explorer
  12. Extension of the Deadline for Intelligent Mail Package Barcode Use
  13. None
  14. [PDF] Intelligent Mail Barcode Technical Resource Guide
  15. 204 Barcode Standards - Postal Explorer - USPS
  16. [PDF] Intelligent Mail Barcode 4-State ( ) SPECIFICATION
  17. None
  18. 202 Elements on the Face of a Mailpiece - Postal Explorer - USPS
  19. Intelligent Mail® Barcode (IMb) 4-State Specification | PostalPro
  20. Intelligent Mail® Barcode Technical Resource Guide | PostalPro
  21. Service Type Identifier (STID) Table Effective January 21, 2024 | PostalPro
  22. USPS Barcode FAQ & Tutorial | BarcodeFAQ.com
  23. [PDF] 204 Barcode Standards - USPS
  24. [PDF] Steps to creating your Intelligent Mail Barcode - USPS
  25. Full-Service Fact Sheets | PostalPro
  26. https://postalpro.usps.com/mailing/edoc
  27. Standard Full-Service Certification for Mailers - PostalPro
  28. DMM Revision: POSTNET Barcode Discontinuation
  29. Intelligent Mail® for Small Business Mailers (IMsb) - PostalPro
  30. Service Type Identifiers (STIDs) | PostalPro
  31. [PDF] Appendix A: Service Type Identifier (STID) Details
  32. https://postalpro.usps.com/informedvisibility
  33. Full-Service Fact Sheets Resources - PostalPro
  34. [PDF] IMb Tracing™ User Guide - USPS
  35. https://postalpro.usps.com/ElectronicMailingInfoReportsGuide
  36. 507 Quick Service Guide | Postal Explorer
  37. Intelligent Mail® Barcode | PostalPro
  38. Full-Service Fact Sheets - PostalPro
  39. POSTNET Barcode - Neodynamic
  40. PLANET Barcode - Neodynamic
  41. Intelligent Mail barcode | Fast Reports
  42. Intelligent Mail® Container Barcode (IMcb) | PostalPro
  43. https://postalpro.usps.com/shipping/impb/BarcodePackageIMSpec
  44. Intelligent Mail Matrix Barcode (IMmb) Technical Specifications | PostalPro
  45. [PDF] January 2025 Release Overview
User Avatar
No comments yet.