Kepler (microarchitecture)

Kepler is the codename for a GPU microarchitecture developed by Nvidia, first introduced at retail in April 2012, as the successor to the Fermi microarchitecture. Kepler was Nvidia's first microarchitecture to focus on energy efficiency. Most GeForce 600 series, most GeForce 700 series, and some GeForce 800M series GPUs were based on Kepler, all manufactured in 28 nm. Kepler found use in the GK20A, the GPU component of the Tegra K1 SoC, and in the Quadro Kxxx series, the Quadro NVS 510, and Tesla computing modules.

Kepler was followed by the Maxwell microarchitecture and used alongside Maxwell in the GeForce 700 series and GeForce 800M series.

The architecture is named after Johannes Kepler, a German mathematician and key figure in the 17th century Scientific Revolution.

The goal of Nvidia's previous architecture was design focused on increasing performance on compute and tessellation. With the Kepler architecture, Nvidia targeted their focus on efficiency, programmability, and performance. The efficiency aim was achieved through the use of a unified GPU clock, simplified static scheduling of instruction and higher emphasis on performance per watt. By abandoning the shader clock found in their previous GPU designs, efficiency is increased, even though it requires additional cores to achieve higher levels of performance. This is not only because the cores are more power-friendly (two Kepler cores using 90% power of one Fermi core, according to Nvidia's numbers), but also the change to a unified GPU clock scheme delivers a 50% reduction in power consumption in that area.

Programmability aim was achieved with Kepler's Hyper-Q, Dynamic Parallelism and multiple new Compute Capabilities 3.x functionality. With it, higher GPU utilization and simplified code management was achievable with GK GPUs thus enabling more flexibility in programming for Kepler GPUs.

Finally with the performance aim, additional execution resources (more CUDA cores, registers and cache) and with Kepler's ability to achieve a memory clock speed of 7 GHz, increases Kepler's performance when compared to previous Nvidia GPUs.

The GK Series GPU contains features from both the older Fermi and newer Kepler generations. Kepler based members add the following standard features:

Kepler employs a new streaming multiprocessor architecture called SMX. CUDA execution core counts were increased from 32 per each of 16 SMs to 192 per each of 8 SMX; the register file was only doubled per SMX to 65,536 x 32-bit for an overall lower ratio; between this and other compromises, despite the 3x overall increase in CUDA cores and clock increase (on the 680 vs. the Fermi 580), the actual performance gains in most operations were well under 3x. Dedicated FP64 CUDA cores are used rather than treating two FP32 cores as a single unit as was done previously, and very few were included on the consumer models resulting in 1/24th speed FP64 calculation compared to FP32.