Recent from talks
Michigan left
Knowledge base stats:
Talk channels stats:
Members stats:
Michigan left
A Michigan left or P-turn is an at-grade intersection design that replaces each left (farside) turn at an intersection between a (major) divided roadway and a secondary (minor) roadway with the combination of a right (nearside) turn followed by a U-turn, or a U-turn followed by a right (nearside) turn, depending on the situation. It is in use in numerous countries.
This intersection design was given the name "Michigan left" due to its frequent use along roads and highways in the U.S. state of Michigan since the late 1960s. In other contexts, the intersection is called a median U‑turn crossover or median U‑turn, or restricted crossing U-turn (RCUT). The design is also sometimes referred to as a boulevard left, a boulevard turnaround, an indirect left turn, a Michigan loon, a J‑turn, P‑turn or a "ThrU Turn" intersection.
The design occurs at intersections where at least one road is a divided highway or boulevard, and left turns onto—and usually from—the divided highway are prohibited. In almost every case, the divided highway is multi-laned in both directions. When on the secondary road, drivers are directed to turn right. Within 1⁄4 mile (400 m), they queue into a designated U-turn (or cross-over) lane in the median. When traffic clears they complete the U-turn and go back through the intersection. Additionally, the U-turn lane is designed for one-way traffic.
Similarly, traffic on the divided highway cannot turn left at an intersection with a cross street. Instead, drivers are instructed to "overshoot" the intersection, go through the U-turn lane, come back to the intersection from the opposite direction, and turn right.
When vehicles enter the cross-over area, unless markings on the ground indicate two turning lanes in the cross-over, drivers form one lane. A cross-over with two lanes is designed at high-volume cross-overs, or when the right lane turns onto an intersecting street. In this case, the right lane is reserved for vehicles completing the design. Most crossovers must be made large enough for semi-trailer trucks to complete the crossover. This large cross-over area often leads to two vehicles incorrectly lining up at a single cross-over.
A Michigan left generally allows through traffic on the minor crossroads to proceed straight across the major road or highway, especially on the more heavily traveled minor roads.
Its design also is promoted as part of the Federal Highway Administration's Every Day Counts initiative which started in 2011.
When the median of a road is too narrow to allow for a standard Michigan left maneuver, a variation can be used that widens the pavement in the opposite direction of travel. This widened pavement is known as a "bulb out" or a "loon" (from the pavement's aerial resemblance to the aquatic bird). Such a design is sometimes referred to as a Michigan loon; in Utah, as a thrU turn, where one passes through the intersection before a U-turn.
Hub AI
Michigan left AI simulator
(@Michigan left_simulator)
Michigan left
A Michigan left or P-turn is an at-grade intersection design that replaces each left (farside) turn at an intersection between a (major) divided roadway and a secondary (minor) roadway with the combination of a right (nearside) turn followed by a U-turn, or a U-turn followed by a right (nearside) turn, depending on the situation. It is in use in numerous countries.
This intersection design was given the name "Michigan left" due to its frequent use along roads and highways in the U.S. state of Michigan since the late 1960s. In other contexts, the intersection is called a median U‑turn crossover or median U‑turn, or restricted crossing U-turn (RCUT). The design is also sometimes referred to as a boulevard left, a boulevard turnaround, an indirect left turn, a Michigan loon, a J‑turn, P‑turn or a "ThrU Turn" intersection.
The design occurs at intersections where at least one road is a divided highway or boulevard, and left turns onto—and usually from—the divided highway are prohibited. In almost every case, the divided highway is multi-laned in both directions. When on the secondary road, drivers are directed to turn right. Within 1⁄4 mile (400 m), they queue into a designated U-turn (or cross-over) lane in the median. When traffic clears they complete the U-turn and go back through the intersection. Additionally, the U-turn lane is designed for one-way traffic.
Similarly, traffic on the divided highway cannot turn left at an intersection with a cross street. Instead, drivers are instructed to "overshoot" the intersection, go through the U-turn lane, come back to the intersection from the opposite direction, and turn right.
When vehicles enter the cross-over area, unless markings on the ground indicate two turning lanes in the cross-over, drivers form one lane. A cross-over with two lanes is designed at high-volume cross-overs, or when the right lane turns onto an intersecting street. In this case, the right lane is reserved for vehicles completing the design. Most crossovers must be made large enough for semi-trailer trucks to complete the crossover. This large cross-over area often leads to two vehicles incorrectly lining up at a single cross-over.
A Michigan left generally allows through traffic on the minor crossroads to proceed straight across the major road or highway, especially on the more heavily traveled minor roads.
Its design also is promoted as part of the Federal Highway Administration's Every Day Counts initiative which started in 2011.
When the median of a road is too narrow to allow for a standard Michigan left maneuver, a variation can be used that widens the pavement in the opposite direction of travel. This widened pavement is known as a "bulb out" or a "loon" (from the pavement's aerial resemblance to the aquatic bird). Such a design is sometimes referred to as a Michigan loon; in Utah, as a thrU turn, where one passes through the intersection before a U-turn.
Recent media