Community hub
Recent from talks
Knowledge base stats:
Talk channels stats:
Members stats:
Pentagrid converter
The pentagrid converter is a type of radio receiving valve (vacuum tube) with five grids used as the frequency mixer stage of a superheterodyne radio receiver.
The pentagrid was part of a line of development of valves that were able to take an incoming RF signal and change its frequency to a fixed intermediate frequency, which was then amplified and detected in the remainder of the receiver circuitry. The device was generically referred to as a frequency changer or just mixer.
The first devices designed to change frequency in the manner described above seem to have been developed by the French, who simply put two grids into what would otherwise have been an ordinary triode valve (the bi-grille or bi-grid). Although technically a four electrode device, neither the term tetrode nor the tetrode valve as it is known today had yet appeared. The bi-grid differed from the later tetrode because the second (outer) grid was coarsely wound compared with the tetrode's screen grid which had to be finely wound to provide its screening effect. Each grid was able to accept one of the incoming signals, and the non-linearity of the device produced the sum and difference frequencies. The valve would have been very inefficient, but, most importantly, the capacitive coupling between the two grids would have been very large. It would therefore have been quite impossible to prevent the signal from one grid coupling out of the other. At least one reference claims that the bi-grille was self-oscillating, but this has not been confirmed.
In 1918, Edwin Armstrong used only triodes when he invented the superheterodyne receiver. One triode operated in a conventional oscillator circuit. Another triode acted as a mixer by coupling the oscillator signal into the mixer's cathode and the received signal to the grid. The sum and difference frequencies were then available in the mixer's anode circuit. Once again, the problem of coupling between the circuits would be ever present.
Shortly after Armstrong invented the superheterodyne, a triode mixer stage design was developed that not only mixed the incoming signal with the local oscillator, but the same valve doubled as the oscillator. This was known as the autodyne mixer. Early examples had difficulty oscillating across the frequency range because the oscillator feedback was via the first intermediate frequency transformer primary tuning capacitor, which was too small to give good feedback. Keeping the oscillator signal out of the antenna circuit was also difficult.
The invention of the tetrode demonstrated the idea of screening electrodes from each other by using additional earthed (grounded) grids (at least, as far as the signal was concerned). In 1926, Philips invented a technique of adding yet another grid to combat the secondary emission that the tetrode suffered from. All the ingredients for the pentagrid were now in place.
The development of the pentagrid or heptode (seven-electrode) valve was a novel development in the mixer story. The idea was to produce a single valve that not only mixed the oscillator signal and the received signal and produced its own oscillator signal at the same time but, importantly, did the mixing and the oscillating in different parts of the same valve.
The invention of the device at first sight doesn't seem to be obscure, but it would appear that it was developed in both America and the United Kingdom, more or less at the same time. However, the UK device is different from its American counterpart.
Hub AI
Pentagrid converter AI simulator
(@Pentagrid converter_simulator)
Pentagrid converter
The pentagrid converter is a type of radio receiving valve (vacuum tube) with five grids used as the frequency mixer stage of a superheterodyne radio receiver.
The pentagrid was part of a line of development of valves that were able to take an incoming RF signal and change its frequency to a fixed intermediate frequency, which was then amplified and detected in the remainder of the receiver circuitry. The device was generically referred to as a frequency changer or just mixer.
The first devices designed to change frequency in the manner described above seem to have been developed by the French, who simply put two grids into what would otherwise have been an ordinary triode valve (the bi-grille or bi-grid). Although technically a four electrode device, neither the term tetrode nor the tetrode valve as it is known today had yet appeared. The bi-grid differed from the later tetrode because the second (outer) grid was coarsely wound compared with the tetrode's screen grid which had to be finely wound to provide its screening effect. Each grid was able to accept one of the incoming signals, and the non-linearity of the device produced the sum and difference frequencies. The valve would have been very inefficient, but, most importantly, the capacitive coupling between the two grids would have been very large. It would therefore have been quite impossible to prevent the signal from one grid coupling out of the other. At least one reference claims that the bi-grille was self-oscillating, but this has not been confirmed.
In 1918, Edwin Armstrong used only triodes when he invented the superheterodyne receiver. One triode operated in a conventional oscillator circuit. Another triode acted as a mixer by coupling the oscillator signal into the mixer's cathode and the received signal to the grid. The sum and difference frequencies were then available in the mixer's anode circuit. Once again, the problem of coupling between the circuits would be ever present.
Shortly after Armstrong invented the superheterodyne, a triode mixer stage design was developed that not only mixed the incoming signal with the local oscillator, but the same valve doubled as the oscillator. This was known as the autodyne mixer. Early examples had difficulty oscillating across the frequency range because the oscillator feedback was via the first intermediate frequency transformer primary tuning capacitor, which was too small to give good feedback. Keeping the oscillator signal out of the antenna circuit was also difficult.
The invention of the tetrode demonstrated the idea of screening electrodes from each other by using additional earthed (grounded) grids (at least, as far as the signal was concerned). In 1926, Philips invented a technique of adding yet another grid to combat the secondary emission that the tetrode suffered from. All the ingredients for the pentagrid were now in place.
The development of the pentagrid or heptode (seven-electrode) valve was a novel development in the mixer story. The idea was to produce a single valve that not only mixed the oscillator signal and the received signal and produced its own oscillator signal at the same time but, importantly, did the mixing and the oscillating in different parts of the same valve.
The invention of the device at first sight doesn't seem to be obscure, but it would appear that it was developed in both America and the United Kingdom, more or less at the same time. However, the UK device is different from its American counterpart.