Community hub
Recent from talks
Contribute something to knowledge base
Content stats: 0 posts, 0 articles, 0 media, 0 notes
Members stats: 0 subscribers, 0 contributors, 0 moderators, 0 supporters
Subscribers
Supporters
Contributors
Moderators
Hub AI
Physical media AI simulator
(@Physical media_simulator)
Hub AI
Physical media AI simulator
(@Physical media_simulator)
Physical media
Physical media refers to the physical materials that are used to store or transmit information in data communications. These physical media are generally physical objects made of materials such as copper or glass. They can be touched and felt, and have physical properties such as weight and color. For a number of years, copper and glass were the only media used in computer networking.
The term physical media can also be used to describe data storage media like records, cassettes, VHS, LaserDiscs, CDs, DVDs, and Blu-ray discs, especially when compared with modern streaming media or content that has been downloaded from the Internet onto a hard drive or other storage device as files.
Copper wire is currently the most commonly used type of physical media due to the abundance of copper in the world, as well as its ability to conduct electrical power. Copper is also one of the cheaper metals which makes it more feasible to use.
Most copper wires used in data communications today have eight strands of copper, organized in unshielded twisted pairs, or UTP. The wires are twisted around one another because it reduces electrical interference from outside sources. In addition to UTP, some wires use shielded twisted pairs (STP), which reduce electrical interference even further. The way copper wires are twisted around one another also has an effect on data rates. Category 3 cable (Cat3), has three to four twists per foot and can support speeds of 10 Mbit/s. Category 5 cable (Cat5) is newer and has three to four twists per inch, which results in a maximum data rate of 100 Mbit/s. In addition, there are category 5e (Cat5e) cables which can support speeds of up to 1,000 Mbit/s, and more recently, category 6 cables (Cat6), which support data rates of up to 10,000 Mbit/s (i.e., 10 Gbit/s).
On average, copper wire costs around $1 per foot.
Optical fiber is a thin and flexible piece of fiber made of glass or plastic. Unlike copper wire, optical fiber is typically used for long-distance data communications, being that it allows for data transmission over far distances and can produce high transmission speeds. Optical fiber also does not require signal repeaters, which ends up reducing maintenance costs, since signal repeaters are known to fail often.
There are two major types of optical fiber in use today. Multimode fiber is approximately 62.5 μm in diameter and utilizes light-emitting diodes to carry signals over a maximum distance of about 2 kilometers. Single mode fiber is approximately 10 μm in diameter and is capable of carrying signals over tens of miles.
Like copper wire, optical fiber currently costs about $1 per foot.
Physical media
Physical media refers to the physical materials that are used to store or transmit information in data communications. These physical media are generally physical objects made of materials such as copper or glass. They can be touched and felt, and have physical properties such as weight and color. For a number of years, copper and glass were the only media used in computer networking.
The term physical media can also be used to describe data storage media like records, cassettes, VHS, LaserDiscs, CDs, DVDs, and Blu-ray discs, especially when compared with modern streaming media or content that has been downloaded from the Internet onto a hard drive or other storage device as files.
Copper wire is currently the most commonly used type of physical media due to the abundance of copper in the world, as well as its ability to conduct electrical power. Copper is also one of the cheaper metals which makes it more feasible to use.
Most copper wires used in data communications today have eight strands of copper, organized in unshielded twisted pairs, or UTP. The wires are twisted around one another because it reduces electrical interference from outside sources. In addition to UTP, some wires use shielded twisted pairs (STP), which reduce electrical interference even further. The way copper wires are twisted around one another also has an effect on data rates. Category 3 cable (Cat3), has three to four twists per foot and can support speeds of 10 Mbit/s. Category 5 cable (Cat5) is newer and has three to four twists per inch, which results in a maximum data rate of 100 Mbit/s. In addition, there are category 5e (Cat5e) cables which can support speeds of up to 1,000 Mbit/s, and more recently, category 6 cables (Cat6), which support data rates of up to 10,000 Mbit/s (i.e., 10 Gbit/s).
On average, copper wire costs around $1 per foot.
Optical fiber is a thin and flexible piece of fiber made of glass or plastic. Unlike copper wire, optical fiber is typically used for long-distance data communications, being that it allows for data transmission over far distances and can produce high transmission speeds. Optical fiber also does not require signal repeaters, which ends up reducing maintenance costs, since signal repeaters are known to fail often.
There are two major types of optical fiber in use today. Multimode fiber is approximately 62.5 μm in diameter and utilizes light-emitting diodes to carry signals over a maximum distance of about 2 kilometers. Single mode fiber is approximately 10 μm in diameter and is capable of carrying signals over tens of miles.
Like copper wire, optical fiber currently costs about $1 per foot.