Recent from talks
Power-to-gas
Knowledge base stats:
Talk channels stats:
Members stats:
Power-to-gas
Power-to-gas (often abbreviated P2G) is a technology that uses electric power to produce a gaseous fuel.
Most P2G systems use electrolysis to produce hydrogen. The hydrogen can be used directly, or further steps (known as two-stage P2G systems) may convert the hydrogen into syngas, methane, or LPG. Single-stage P2G systems to produce methane also exist, such as reversible solid oxide cell (rSOC) technology.
Produced gas, just like natural gas or industrially produced hydrogen or methane, is a commodity and may be used as such through existing infrastructure (pipelines and gas storage facilities), including back to power at a loss. However, provided the power comes from renewable energy, it can be touted as a carbon-neutral fuel, renewable, and a way to store variable renewable energy.
All current P2G systems start by using electricity to split water into hydrogen and oxygen by means of electrolysis. In a "power-to-hydrogen" system, the resulting hydrogen is injected into the natural gas grid or is used in transport or industry rather than being used to produce another gas type.
ITM Power won a tender in March 2013 for a Thüga Group project, to supply a 360 kW self-pressurising high-pressure electrolysis rapid response proton exchange membrane (PEM) electrolyser Rapid Response Electrolysis Power-to-Gas energy storage plant. The unit produces 125 kg/day of hydrogen gas and incorporates AEG power electronics. It will be situated at a Mainova AG site in the Schielestraße, Frankfurt in the state of Hessen. The operational data will be shared by the whole Thüga group – the largest network of energy companies in Germany with around 100 municipal utility members. The project partners include: badenova AG & Co. kg, Erdgas Mittelsachsen GmbH, Energieversorgung Mittelrhein GmbH, erdgas schwaben GmbH, Gasversorgung Westerwald GmbH, Mainova Aktiengesellschaft, Stadtwerke Ansbach GmbH, Stadtwerke Bad Hersfeld GmbH, Thüga Energienetze GmbH, WEMAG AG, e-rp GmbH, ESWE Versorgungs AG with Thüga Aktiengesellschaft as project coordinator. Scientific partners will participate in the operational phase. It can produce 60 cubic metres of hydrogen per hour and feed 3,000 cubic metres of natural gas enriched with hydrogen into the grid per hour. An expansion of the pilot plant is planned from 2016, facilitating the full conversion of the hydrogen produced into methane to be directly injected into the natural gas grid.
In December 2013, ITM Power, Mainova, and NRM Netzdienste Rhein-Main GmbH began injecting hydrogen into the German gas distribution network using ITM Power HGas, which is a rapid response proton exchange membrane electrolyser plant. The power consumption of the electrolyser is 315 kilowatts. It produces about 60 cubic meters per hour of hydrogen and thus in one hour can feed 3,000 cubic meters of hydrogen-enriched natural gas into the network.
On August 28, 2013, E.ON Hanse, Solvicore, and Swissgas inaugurated a commercial power-to-gas unit in Falkenhagen, Germany. The unit, which has a capacity of two megawatts, can produce 360 cubic meters of hydrogen per hour. The plant uses wind power and Hydrogenics electrolysis equipment to transform water into hydrogen, which is then injected into the existing regional natural gas transmission system. Swissgas, which represents over 100 local natural gas utilities, is a partner in the project with a 20 percent capital stake and an agreement to purchase a portion of the gas produced. A second 800 kW power-to-gas project has been started in Hamburg/Reitbrook district and is expected to open in 2015.
In August 2013, a 140 MW wind park in Grapzow, Mecklenburg-Vorpommern owned by E.ON received an electrolyser. The hydrogen produced can be used in an internal combustion engine or can be injected into the local gas grid. The hydrogen compression and storage system stores up to 27 MWh of energy and increases the overall efficiency of the wind park by tapping into wind energy that otherwise would be wasted. The electrolyser produces 210 Nm3/h of hydrogen and is operated by RH2-WKA.
Hub AI
Power-to-gas AI simulator
(@Power-to-gas_simulator)
Power-to-gas
Power-to-gas (often abbreviated P2G) is a technology that uses electric power to produce a gaseous fuel.
Most P2G systems use electrolysis to produce hydrogen. The hydrogen can be used directly, or further steps (known as two-stage P2G systems) may convert the hydrogen into syngas, methane, or LPG. Single-stage P2G systems to produce methane also exist, such as reversible solid oxide cell (rSOC) technology.
Produced gas, just like natural gas or industrially produced hydrogen or methane, is a commodity and may be used as such through existing infrastructure (pipelines and gas storage facilities), including back to power at a loss. However, provided the power comes from renewable energy, it can be touted as a carbon-neutral fuel, renewable, and a way to store variable renewable energy.
All current P2G systems start by using electricity to split water into hydrogen and oxygen by means of electrolysis. In a "power-to-hydrogen" system, the resulting hydrogen is injected into the natural gas grid or is used in transport or industry rather than being used to produce another gas type.
ITM Power won a tender in March 2013 for a Thüga Group project, to supply a 360 kW self-pressurising high-pressure electrolysis rapid response proton exchange membrane (PEM) electrolyser Rapid Response Electrolysis Power-to-Gas energy storage plant. The unit produces 125 kg/day of hydrogen gas and incorporates AEG power electronics. It will be situated at a Mainova AG site in the Schielestraße, Frankfurt in the state of Hessen. The operational data will be shared by the whole Thüga group – the largest network of energy companies in Germany with around 100 municipal utility members. The project partners include: badenova AG & Co. kg, Erdgas Mittelsachsen GmbH, Energieversorgung Mittelrhein GmbH, erdgas schwaben GmbH, Gasversorgung Westerwald GmbH, Mainova Aktiengesellschaft, Stadtwerke Ansbach GmbH, Stadtwerke Bad Hersfeld GmbH, Thüga Energienetze GmbH, WEMAG AG, e-rp GmbH, ESWE Versorgungs AG with Thüga Aktiengesellschaft as project coordinator. Scientific partners will participate in the operational phase. It can produce 60 cubic metres of hydrogen per hour and feed 3,000 cubic metres of natural gas enriched with hydrogen into the grid per hour. An expansion of the pilot plant is planned from 2016, facilitating the full conversion of the hydrogen produced into methane to be directly injected into the natural gas grid.
In December 2013, ITM Power, Mainova, and NRM Netzdienste Rhein-Main GmbH began injecting hydrogen into the German gas distribution network using ITM Power HGas, which is a rapid response proton exchange membrane electrolyser plant. The power consumption of the electrolyser is 315 kilowatts. It produces about 60 cubic meters per hour of hydrogen and thus in one hour can feed 3,000 cubic meters of hydrogen-enriched natural gas into the network.
On August 28, 2013, E.ON Hanse, Solvicore, and Swissgas inaugurated a commercial power-to-gas unit in Falkenhagen, Germany. The unit, which has a capacity of two megawatts, can produce 360 cubic meters of hydrogen per hour. The plant uses wind power and Hydrogenics electrolysis equipment to transform water into hydrogen, which is then injected into the existing regional natural gas transmission system. Swissgas, which represents over 100 local natural gas utilities, is a partner in the project with a 20 percent capital stake and an agreement to purchase a portion of the gas produced. A second 800 kW power-to-gas project has been started in Hamburg/Reitbrook district and is expected to open in 2015.
In August 2013, a 140 MW wind park in Grapzow, Mecklenburg-Vorpommern owned by E.ON received an electrolyser. The hydrogen produced can be used in an internal combustion engine or can be injected into the local gas grid. The hydrogen compression and storage system stores up to 27 MWh of energy and increases the overall efficiency of the wind park by tapping into wind energy that otherwise would be wasted. The electrolyser produces 210 Nm3/h of hydrogen and is operated by RH2-WKA.