Printed electronics

Printed electronics is a set of printing methods used to create electrical devices on various substrates. Printing typically uses common printing equipment suitable for defining patterns on material, such as screen printing, flexography, gravure, offset lithography, and inkjet. By electronic-industry standards, these are low-cost processes. Electrically functional electronic or optical inks are deposited on the substrate, creating active or passive devices, such as thin film transistors, capacitors, coils, and resistors. Some researchers expect printed electronics to facilitate widespread, very low-cost, low-performance electronics for applications such as flexible displays, smart labels, decorative and animated posters, and active clothing that do not require high performance.

The term printed electronics is often related^{[by whom?]} to organic electronics or plastic electronics, in which one or more inks are composed of carbon-based compounds.^{[need quotation to verify]} These other terms refer to the ink material, which can be deposited by solution-based, vacuum-based, or other processes. Printed electronics, in contrast, specifies the process, and, subject to the specific requirements of the printing process selected, can utilize any solution-based material. This includes organic semiconductors, inorganic semiconductors, metallic conductors, nanoparticles, and nanotubes. The solution usually consist of filler materials dispersed in a suitable solvent. The most commonly used solvents include ethanol, xylene, Dimethylformamide (DMF), Dimethyl sulfoxide (DMSO), toluene and water, whereas, the most common conductive fillers include silver nanoparticles, silver flakes, carbon black, graphene, carbon nanotubes, conductive polymers (such as polyaniline and polypyrrole), and metal powders (such as copper or nickel). Considering the environmental impacts of the organic solvents, researchers are now focused on developing printable inks using water.

For the preparation of printed electronics nearly all industrial printing methods are employed. Similar to conventional printing, printed electronics applies ink layers one atop another. So the coherent development of printing methods and ink materials are the field's essential tasks.

The most important benefit of printing is low-cost volume fabrication.^{[citation needed]} The lower cost enables use in more applications. An example is RFID-systems, which enable contactless identification in trade and transport. In some domains, such as light-emitting diodes printing does not impact performance. Printing on flexible substrates allows electronics to be placed on curved surfaces, for example: printing solar cells on vehicle roofs. More typically, conventional semiconductors justify their much higher costs by providing much higher performance.

The maximum required resolution of structures in conventional printing is determined by the human eye. Feature sizes smaller than approximately 20 μm cannot be distinguished by the human eye and consequently exceed the capabilities of conventional printing processes. In contrast, higher resolution and smaller structures are necessary in most electronics printing, because they directly affect circuit density and functionality (especially transistors). A similar requirement holds for the precision with which layers are printed on top of each other (layer to layer registration).

Control of thickness, holes, and material compatibility (wetting, adhesion, solubility) are essential, but matter in conventional printing only if the eye can detect them. Conversely, the visual impression is irrelevant for printed electronics.

The attraction of printing technology for the fabrication of electronics mainly results from the possibility of preparing stacks of micro-structured layers (and thereby thin-film devices) in a much simpler and cost-effective way compared to conventional electronics. Also, the ability to implement new or improved functionalities (e.g. mechanical flexibility) plays a role. The selection of the printing method used is determined by requirements concerning printed layers, by the properties of printed materials as well as economic and technical considerations of the final printed products.

Printing technologies divide between sheet-based and roll-to-roll-based approaches. Sheet-based inkjet and screen printing are best for low-volume, high-precision work. Gravure, offset and flexographic printing are more common for high-volume production, such as solar cells, reaching 10,000 square meters per hour (m²/h). While offset and flexographic printing are mainly used for inorganic and organic conductors (the latter also for dielectrics), gravure printing is especially suitable for quality-sensitive layers like organic semiconductors and semiconductor/dielectric-interfaces in transistors, due to high layer quality. If high resolution is needed, gravure is also suitable for inorganic and organic conductors. Organic field-effect transistors and integrated circuits can be prepared completely by means of mass-printing methods.