Community hub
Recent from talks
Contribute something to knowledge base
Content stats: 0 posts, 0 articles, 0 media, 0 notes
Members stats: 0 subscribers, 0 contributors, 0 moderators, 0 supporters
Subscribers
Supporters
Contributors
Moderators
Hub AI
Q code AI simulator
(@Q code_simulator)
Hub AI
Q code AI simulator
(@Q code_simulator)
Q code
The Q-code is a standardised collection of three-letter codes that each start with the letter "Q". It is an operating signal initially developed for commercial radiotelegraph communication and later adopted by other radio services, especially amateur radio. To distinguish the use of a Q-code transmitted as a question from the same Q-code transmitted as a statement, operators either prefixed it with the military network question marker "INT" ( ▄ ▄ ▄▄▄ ▄ ▄▄▄ ) or suffixed it with the standard Morse question mark UD ( ▄ ▄ ▄▄▄ ▄▄▄ ▄ ▄ ).
Although Q-codes were created when radio used Morse code exclusively, they continued to be employed after the introduction of voice transmissions. To avoid confusion, transmitter call signs are restricted; countries can be issued unused Q-Codes as their ITU prefix e.g. Qatar is QAT.
Codes in the range QAA–QNZ are reserved for aeronautical use; QOA–QQZ for maritime use and QRA–QUZ for all services.
"Q" has no official meaning, but it is sometimes assigned a word with mnemonic value, such as "question" or "query", for example in QFE: "query field elevation".
The original Q-codes were created, circa 1909, by the British government as a "List of abbreviations ... prepared for the use of British ships and coast stations licensed by the Postmaster General". The Q-codes facilitated communication between maritime radio operators speaking different languages, so they were soon adopted internationally. A total of forty-five Q-codes appeared in the "List of Abbreviations to be used in Radio Communications", which was included in the Service Regulations affixed to the Second International Radiotelegraph Convention in London (The convention was signed on July 5, 1912, and became effective July 1, 1913.)
The following table reviews a sample of the all-services Q-codes adopted by the 1912 convention:
Over the years the original Q-codes were modified to reflect changes in radio practice. For example, QSW / QSX originally stood for, "Shall I increase / decrease my spark frequency?", but in the 1920s spark-gap transmitters were gradually being banned from land stations, making that meaning obsolete. By the 1970s, the Post Office Handbook for Radio Operators listed over a hundred Q-codes, covering a wide range of subjects including radio procedures, meteorology, radio direction finding, and search and rescue.
Some Q-codes are also used in aviation, in particular QNE, QNH and QFE, referring to certain altimeter settings. These codes are used in radiotelephone conversations with air traffic control as unambiguous shorthand, where safety and efficiency are of vital importance. A subset of Q-codes is used by the Miami-Dade County, Florida local government for law enforcement and fire rescue communications, one of the few instances where Q-codes are used in ground voice communication.
Q code
The Q-code is a standardised collection of three-letter codes that each start with the letter "Q". It is an operating signal initially developed for commercial radiotelegraph communication and later adopted by other radio services, especially amateur radio. To distinguish the use of a Q-code transmitted as a question from the same Q-code transmitted as a statement, operators either prefixed it with the military network question marker "INT" ( ▄ ▄ ▄▄▄ ▄ ▄▄▄ ) or suffixed it with the standard Morse question mark UD ( ▄ ▄ ▄▄▄ ▄▄▄ ▄ ▄ ).
Although Q-codes were created when radio used Morse code exclusively, they continued to be employed after the introduction of voice transmissions. To avoid confusion, transmitter call signs are restricted; countries can be issued unused Q-Codes as their ITU prefix e.g. Qatar is QAT.
Codes in the range QAA–QNZ are reserved for aeronautical use; QOA–QQZ for maritime use and QRA–QUZ for all services.
"Q" has no official meaning, but it is sometimes assigned a word with mnemonic value, such as "question" or "query", for example in QFE: "query field elevation".
The original Q-codes were created, circa 1909, by the British government as a "List of abbreviations ... prepared for the use of British ships and coast stations licensed by the Postmaster General". The Q-codes facilitated communication between maritime radio operators speaking different languages, so they were soon adopted internationally. A total of forty-five Q-codes appeared in the "List of Abbreviations to be used in Radio Communications", which was included in the Service Regulations affixed to the Second International Radiotelegraph Convention in London (The convention was signed on July 5, 1912, and became effective July 1, 1913.)
The following table reviews a sample of the all-services Q-codes adopted by the 1912 convention:
Over the years the original Q-codes were modified to reflect changes in radio practice. For example, QSW / QSX originally stood for, "Shall I increase / decrease my spark frequency?", but in the 1920s spark-gap transmitters were gradually being banned from land stations, making that meaning obsolete. By the 1970s, the Post Office Handbook for Radio Operators listed over a hundred Q-codes, covering a wide range of subjects including radio procedures, meteorology, radio direction finding, and search and rescue.
Some Q-codes are also used in aviation, in particular QNE, QNH and QFE, referring to certain altimeter settings. These codes are used in radiotelephone conversations with air traffic control as unambiguous shorthand, where safety and efficiency are of vital importance. A subset of Q-codes is used by the Miami-Dade County, Florida local government for law enforcement and fire rescue communications, one of the few instances where Q-codes are used in ground voice communication.