Recent from talks
Racemization
Knowledge base stats:
Talk channels stats:
Members stats:
Racemization
In chemistry, racemization is a conversion, by heat or by chemical reaction, of an optically active compound into a racemic (optically inactive) form. This creates a 1:1 molar ratio of enantiomers and is referred to as a racemic mixture (i.e. contain equal amount of (+) and (−) forms). Plus and minus forms are called dextrorotation and levorotation. The D and L enantiomers are present in equal quantities, the resulting sample is described as a racemic mixture or a racemate. Racemization can proceed through a number of different mechanisms, and it has particular significance in pharmacology inasmuch as different enantiomers may have different pharmaceutical effects.
Chiral molecules have two forms (at each point of asymmetry), which differ in their optical characteristics: The levorotatory form (the (−)-form) will rotate counter-clockwise on the plane of polarization of a beam of light, whereas the dextrorotatory form (the (+)-form) will rotate clockwise on the plane of polarization of a beam of light. The two forms, which are non-superposable when rotated in 3-dimensional space, are said to be enantiomers. The notation is not to be confused with D and L naming of molecules which refers to the similarity in structure to D-glyceraldehyde and L-glyceraldehyde. Also, (R)- and (S)- refer to the chemical structure of the molecule based on Cahn–Ingold–Prelog priority rules of naming rather than rotation of light. R/S notation is the primary notation used for +/- now because D and L notation are used primarily for sugars and amino acids.
Racemization occurs when one pure form of an enantiomer is converted into equal proportion of both enantiomers, forming a racemate. When there are both equal numbers of dextrorotating and levorotating molecules, the net optical rotation of a racemate is zero. Enantiomers should also be distinguished from diastereomers which are a type of stereoisomer that have different molecular structures around a stereocenter and are not mirror images.
Partial to complete racemization of stereochemistry in solutions are a result of SN1 mechanisms. However, when complete inversion of stereochemistry configuration occurs in a substitution reaction, an SN2 reaction is responsible.
In the solid state, racemic mixtures may have different physical properties from either of the pure enantiomers because of the differential intermolecular interactions (see Biological Significance section). The change from a pure enantiomer to a racemate can change its density, melting point, solubility, heat of fusion, refractive index, and its various spectra. Crystallization of a racemate can result in separate (+) and (−) forms, or a single racemic compound. However, in liquid and gaseous states, racemic mixtures will behave with physical properties that are identical, or near identical, to their pure enantiomers.
In general, most biochemical reactions are stereoselective, so only one stereoisomer will produce the intended product while the other simply does not participate or can cause side-effects. Of note, the L form of amino acids and the D form of sugars (primarily glucose) are usually the biologically reactive form. This is due to the fact that many biological molecules are chiral and thus the reactions between specific enantiomers produce pure stereoisomers. Also notable is the fact that all amino acid residues exist in the L form. However, bacteria produce D-amino acid residues that polymerize into short polypeptides which can be found in bacterial cell walls. These polypeptides are less digestible by peptidases and are synthesized by bacterial enzymes instead of mRNA translation which would normally produce L-amino acids.
The stereoselective nature of most biochemical reactions meant that different enantiomers of a chemical may have different properties and effects on a person. Many psychotropic drugs show differing activity or efficacy between isomers, e.g. amphetamine is often dispensed as racemic salts while the more active dextroamphetamine is reserved for refractory cases or more severe indications; another example is methadone, of which one isomer has activity as an opioid agonist and the other as an NMDA antagonist.
Racemization of pharmaceutical drugs can occur in vivo. Thalidomide as the (R) enantiomer is effective against morning sickness, while the (S) enantiomer is teratogenic, causing birth defects when taken in the first trimester of pregnancy. If only one enantiomer is administered to a human subject, both forms may be found later in the blood serum. The drug is therefore not considered safe for use by women of child-bearing age, and while it has other uses, its use is tightly controlled. Thalidomide can be used to treat multiple myeloma.
Hub AI
Racemization AI simulator
(@Racemization_simulator)
Racemization
In chemistry, racemization is a conversion, by heat or by chemical reaction, of an optically active compound into a racemic (optically inactive) form. This creates a 1:1 molar ratio of enantiomers and is referred to as a racemic mixture (i.e. contain equal amount of (+) and (−) forms). Plus and minus forms are called dextrorotation and levorotation. The D and L enantiomers are present in equal quantities, the resulting sample is described as a racemic mixture or a racemate. Racemization can proceed through a number of different mechanisms, and it has particular significance in pharmacology inasmuch as different enantiomers may have different pharmaceutical effects.
Chiral molecules have two forms (at each point of asymmetry), which differ in their optical characteristics: The levorotatory form (the (−)-form) will rotate counter-clockwise on the plane of polarization of a beam of light, whereas the dextrorotatory form (the (+)-form) will rotate clockwise on the plane of polarization of a beam of light. The two forms, which are non-superposable when rotated in 3-dimensional space, are said to be enantiomers. The notation is not to be confused with D and L naming of molecules which refers to the similarity in structure to D-glyceraldehyde and L-glyceraldehyde. Also, (R)- and (S)- refer to the chemical structure of the molecule based on Cahn–Ingold–Prelog priority rules of naming rather than rotation of light. R/S notation is the primary notation used for +/- now because D and L notation are used primarily for sugars and amino acids.
Racemization occurs when one pure form of an enantiomer is converted into equal proportion of both enantiomers, forming a racemate. When there are both equal numbers of dextrorotating and levorotating molecules, the net optical rotation of a racemate is zero. Enantiomers should also be distinguished from diastereomers which are a type of stereoisomer that have different molecular structures around a stereocenter and are not mirror images.
Partial to complete racemization of stereochemistry in solutions are a result of SN1 mechanisms. However, when complete inversion of stereochemistry configuration occurs in a substitution reaction, an SN2 reaction is responsible.
In the solid state, racemic mixtures may have different physical properties from either of the pure enantiomers because of the differential intermolecular interactions (see Biological Significance section). The change from a pure enantiomer to a racemate can change its density, melting point, solubility, heat of fusion, refractive index, and its various spectra. Crystallization of a racemate can result in separate (+) and (−) forms, or a single racemic compound. However, in liquid and gaseous states, racemic mixtures will behave with physical properties that are identical, or near identical, to their pure enantiomers.
In general, most biochemical reactions are stereoselective, so only one stereoisomer will produce the intended product while the other simply does not participate or can cause side-effects. Of note, the L form of amino acids and the D form of sugars (primarily glucose) are usually the biologically reactive form. This is due to the fact that many biological molecules are chiral and thus the reactions between specific enantiomers produce pure stereoisomers. Also notable is the fact that all amino acid residues exist in the L form. However, bacteria produce D-amino acid residues that polymerize into short polypeptides which can be found in bacterial cell walls. These polypeptides are less digestible by peptidases and are synthesized by bacterial enzymes instead of mRNA translation which would normally produce L-amino acids.
The stereoselective nature of most biochemical reactions meant that different enantiomers of a chemical may have different properties and effects on a person. Many psychotropic drugs show differing activity or efficacy between isomers, e.g. amphetamine is often dispensed as racemic salts while the more active dextroamphetamine is reserved for refractory cases or more severe indications; another example is methadone, of which one isomer has activity as an opioid agonist and the other as an NMDA antagonist.
Racemization of pharmaceutical drugs can occur in vivo. Thalidomide as the (R) enantiomer is effective against morning sickness, while the (S) enantiomer is teratogenic, causing birth defects when taken in the first trimester of pregnancy. If only one enantiomer is administered to a human subject, both forms may be found later in the blood serum. The drug is therefore not considered safe for use by women of child-bearing age, and while it has other uses, its use is tightly controlled. Thalidomide can be used to treat multiple myeloma.