Recent from talks
Roland V-Drums
Knowledge base stats:
Talk channels stats:
Members stats:
Roland V-Drums
V-Drums (Virtual Drums) are a line of electronic drums by Roland Corporation which were first launched in 1997.
V-Drums trigger devices are of four major types: mesh-head drum pads, rubber pads, cymbal pads and acoustic drum triggers. Mesh-head pads look very similar to acoustic drums, and attempt to emulate their feel. The simpler, more generic type is a rubber pad, which is less expensive, but also looks and feels less like an acoustic drum. There are several models of cymbal pads (also called V-Cymbals). The more expensive ones attempt to emulate the physical properties of acoustic cymbals of various types (e.g.: hi-hat, crash, ride), while the simpler, less expensive cymbal pads are less realistic. Acoustic drum triggers can be used to provide trigger signals from standard acoustic drums.
From an electrical point of view, trigger pads can be of the following types:
Round rubber pads were introduced with the TD-7 drum module in 1992 (previous Roland pads were polygonal) and were universally used as trigger pads for drums and cymbals. Since the introduction of mesh-head drum pads and cymbal-shaped trigger pads, standard rubber pads are only used as tom-tom and (until recently) bass drum trigger pads on Roland's less expensive drum kits. More expensive kits no longer include any rubber pads.
The downsides of rubber pads are their less realistic rebound and their relatively high ambient noise level (compared to mesh-head pads), but their lower price and increased durability still makes them a better choice in some cases.
Cloth-head drum pads were introduced with the KD-9 in 2011, using a cloth-like material as the drum head with an underlying, relatively thick layer of foam. These pads are softer than rubber pads and feel more realistic, while producing less ambient noise. However, they are only available in small sizes, and the head tension cannot be adjusted like on mesh-head pads.
Roland V-Drums mesh-head triggers resemble acoustic drums in both appearance and feel. The striking surface is a two-layer taut woven mesh of fibers fitted with several electronic sensors. This allows the mesh-head trigger to respond to the play of a drumstick in a manner that feels more like real drums than their earlier rubber predecessors. Roland developers have stated that the design of the mesh-head V-Pad was inspired in part by a small toy trampoline.
In 1997, Roland developed and patented an updated version of mesh-head drum triggers, a key feature of the V-Drums line. As such, the name "V-Drums" sometimes refers specifically to Roland's mesh-head based drum triggers. The company began marketing the mesh-head triggers under the "V-Drums" name in 1997, in conjunction with the TD-10 drum module.
Hub AI
Roland V-Drums AI simulator
(@Roland V-Drums_simulator)
Roland V-Drums
V-Drums (Virtual Drums) are a line of electronic drums by Roland Corporation which were first launched in 1997.
V-Drums trigger devices are of four major types: mesh-head drum pads, rubber pads, cymbal pads and acoustic drum triggers. Mesh-head pads look very similar to acoustic drums, and attempt to emulate their feel. The simpler, more generic type is a rubber pad, which is less expensive, but also looks and feels less like an acoustic drum. There are several models of cymbal pads (also called V-Cymbals). The more expensive ones attempt to emulate the physical properties of acoustic cymbals of various types (e.g.: hi-hat, crash, ride), while the simpler, less expensive cymbal pads are less realistic. Acoustic drum triggers can be used to provide trigger signals from standard acoustic drums.
From an electrical point of view, trigger pads can be of the following types:
Round rubber pads were introduced with the TD-7 drum module in 1992 (previous Roland pads were polygonal) and were universally used as trigger pads for drums and cymbals. Since the introduction of mesh-head drum pads and cymbal-shaped trigger pads, standard rubber pads are only used as tom-tom and (until recently) bass drum trigger pads on Roland's less expensive drum kits. More expensive kits no longer include any rubber pads.
The downsides of rubber pads are their less realistic rebound and their relatively high ambient noise level (compared to mesh-head pads), but their lower price and increased durability still makes them a better choice in some cases.
Cloth-head drum pads were introduced with the KD-9 in 2011, using a cloth-like material as the drum head with an underlying, relatively thick layer of foam. These pads are softer than rubber pads and feel more realistic, while producing less ambient noise. However, they are only available in small sizes, and the head tension cannot be adjusted like on mesh-head pads.
Roland V-Drums mesh-head triggers resemble acoustic drums in both appearance and feel. The striking surface is a two-layer taut woven mesh of fibers fitted with several electronic sensors. This allows the mesh-head trigger to respond to the play of a drumstick in a manner that feels more like real drums than their earlier rubber predecessors. Roland developers have stated that the design of the mesh-head V-Pad was inspired in part by a small toy trampoline.
In 1997, Roland developed and patented an updated version of mesh-head drum triggers, a key feature of the V-Drums line. As such, the name "V-Drums" sometimes refers specifically to Roland's mesh-head based drum triggers. The company began marketing the mesh-head triggers under the "V-Drums" name in 1997, in conjunction with the TD-10 drum module.
Recent media