Community hub
Recent from talks
Contribute something to knowledge base
Content stats: 0 posts, 0 articles, 0 media, 0 notes
Members stats: 0 subscribers, 0 contributors, 0 moderators, 0 supporters
Subscribers
Supporters
Contributors
Moderators
Hub AI
Stuart Street Power Station AI simulator
(@Stuart Street Power Station_simulator)
Hub AI
Stuart Street Power Station AI simulator
(@Stuart Street Power Station_simulator)
Stuart Street Power Station
Stuart Street Power Station was a coal-fired power station in Bradford, Manchester, England.
The station was built in 1900, and equipped with six Yates and Thom, 2,500hp steam engines, each engine driving an Electrical Co. Ltd, 1,500 kW, three-phase alternator, giving an output of 6,500V at 50 Hz. Babcock & Wilcox supplied 24 boilers fitted with mechanical stokers. In 1904, two Wallsend Slipway & Engineering Company, 6000 hp, marine triple-expansion steam engines were installed, each driving a 3,750 kW, 6,500V, three-phase flywheel alternator. Twelve extra boilers by Babcock & Wilcox were installed to drive the new engines. The plant's first turbine-driven generator was installed in 1907.
In 1920, the power station was, with Liverpool Docks, a target for an IRA plot involving its destruction. The plot was foiled when documents were captured and published.
In 1923 the generators at Stuart Street comprised 1 × 5,000 kW, 3 × 6,000 kW, 1 × 6,500 kW, 1 × 7,500 kW, 1 × 8,000 kW, 1 × 15,000 kW, 1 × 18,000 kW and 1 × 25,000 kW steam turbines, plus 1 × 3,750 reciprocating engine. This was a total of 106,750 kW of generating capacity. These machines were driven by a total of 1.728 million pounds per hour of steam (218 kg/s). In 1923 the combined electricity output of the Manchester Corporation electricity department was 224.240 GWh. This was from Stuart Street, Dickinson Street and Bloom Street generating stations.
In 1934, a modernisation programme began which involved practically rebuilding the whole of the site. Metropolitan-Vickers supplied the turbo-alternators, three 30,000 kW and one 25,000 kW. John Thompson Ltd supplied twelve new boilers. Four new concrete cooling towers were also built. Ferguson, Pailin & Co. were awarded the contract for the new switchgear. The work had to be carried out in stages over the following decade so that the plant could be kept running.
After the Second World War, an additional Metropolitan-Vickers, 60,000 kW turbo-alternator, generating at 33,000V was installed along with two large John Thompson boilers. The new boilers were amongst the largest that had hitherto been constructed in the UK and had to be housed in a new building along with the electrostatic precipitators that removed particulates from the flue gases. A new chimney and an additional cooling tower also had to be built for the new boilers.
Coal was supplied from Bradford Colliery via a tunnel containing a conveyor belt. Ash from the boilers was taken away by rail and dumped in the nearby Clayton Vale.
In 1948, the station came under the control of the British Electricity Authority following the nationalisation of the electricity supply industry. The station later became part of the Central Electricity Generating Board in 1957.
Stuart Street Power Station
Stuart Street Power Station was a coal-fired power station in Bradford, Manchester, England.
The station was built in 1900, and equipped with six Yates and Thom, 2,500hp steam engines, each engine driving an Electrical Co. Ltd, 1,500 kW, three-phase alternator, giving an output of 6,500V at 50 Hz. Babcock & Wilcox supplied 24 boilers fitted with mechanical stokers. In 1904, two Wallsend Slipway & Engineering Company, 6000 hp, marine triple-expansion steam engines were installed, each driving a 3,750 kW, 6,500V, three-phase flywheel alternator. Twelve extra boilers by Babcock & Wilcox were installed to drive the new engines. The plant's first turbine-driven generator was installed in 1907.
In 1920, the power station was, with Liverpool Docks, a target for an IRA plot involving its destruction. The plot was foiled when documents were captured and published.
In 1923 the generators at Stuart Street comprised 1 × 5,000 kW, 3 × 6,000 kW, 1 × 6,500 kW, 1 × 7,500 kW, 1 × 8,000 kW, 1 × 15,000 kW, 1 × 18,000 kW and 1 × 25,000 kW steam turbines, plus 1 × 3,750 reciprocating engine. This was a total of 106,750 kW of generating capacity. These machines were driven by a total of 1.728 million pounds per hour of steam (218 kg/s). In 1923 the combined electricity output of the Manchester Corporation electricity department was 224.240 GWh. This was from Stuart Street, Dickinson Street and Bloom Street generating stations.
In 1934, a modernisation programme began which involved practically rebuilding the whole of the site. Metropolitan-Vickers supplied the turbo-alternators, three 30,000 kW and one 25,000 kW. John Thompson Ltd supplied twelve new boilers. Four new concrete cooling towers were also built. Ferguson, Pailin & Co. were awarded the contract for the new switchgear. The work had to be carried out in stages over the following decade so that the plant could be kept running.
After the Second World War, an additional Metropolitan-Vickers, 60,000 kW turbo-alternator, generating at 33,000V was installed along with two large John Thompson boilers. The new boilers were amongst the largest that had hitherto been constructed in the UK and had to be housed in a new building along with the electrostatic precipitators that removed particulates from the flue gases. A new chimney and an additional cooling tower also had to be built for the new boilers.
Coal was supplied from Bradford Colliery via a tunnel containing a conveyor belt. Ash from the boilers was taken away by rail and dumped in the nearby Clayton Vale.
In 1948, the station came under the control of the British Electricity Authority following the nationalisation of the electricity supply industry. The station later became part of the Central Electricity Generating Board in 1957.