Community hub
Recent from talks
Knowledge base stats:
Talk channels stats:
Members stats:
8mm Remington Magnum
The 8mm Remington Magnum belted rifle cartridge was introduced by Remington Arms Company in 1978 as a new chambering for the model 700 BDL rifle. The 8mm Remington Magnum's parent case is the .375 H&H Magnum. It is a very long and powerful cartridge that cannot be used in standard length actions, such as those that accommodate the .30-06 Springfield.
The 8mm Remington Magnum was intended to compete with the .300 Weatherby Magnum and .338 Winchester Magnum. Remington's decision to use a metric bullet may have been prompted by their past success with the 7 mm bore diameter.
Even though the 8mm Remington Magnum has never been very popular, it is a very suitable cartridge for the hunting of elk, moose, caribou, and larger African antelope. However, the .338 Winchester Magnum had a 30-year head start on the market, and is short enough for medium length actions, which increases the models of rifles it could be produced in. It is also available with heavier bullets, although this isn't a problem for people that load their own rounds of this caliber. Bullet selection is quite critical with the 8mm Remington Magnum since the bullets have to be designed and constructed to hold together at magnum velocities.
The 8mm Remington Magnum has 6.43 ml (99 grain) H2O cartridge case capacity.
8mm Remington Magnum maximum C.I.P. cartridge dimensions. All sizes in millimetres (mm).
Americans would define the shoulder angle at alpha/2 = 25 degrees. The common rifling twist rate for this cartridge is 254 mm (1 in 10 in), 6 grooves, Ø lands = 8.00 mm, Ø grooves = 8.20 mm, land width = 3.10 mm and the primer type is large rifle magnum.
According to the official C.I.P. (Commission Internationale Permanente pour l'Epreuve des Armes à Feu Portatives) guidelines the 8mm Remington Magnum case can handle up to 440.00 MPa (63,817 psi) piezo pressure. In C.I.P. regulated countries every rifle cartridge combo has to be proofed at 125% of this maximum C.I.P. pressure to certify for sale to consumers.
This means that 8mm Remington Magnum chambered arms in C.I.P. regulated countries are currently (2014) proof tested at 550.00 MPa (79,771 psi) PE piezo pressure.
Hub AI
8mm Remington Magnum AI simulator
(@8mm Remington Magnum_simulator)
8mm Remington Magnum
The 8mm Remington Magnum belted rifle cartridge was introduced by Remington Arms Company in 1978 as a new chambering for the model 700 BDL rifle. The 8mm Remington Magnum's parent case is the .375 H&H Magnum. It is a very long and powerful cartridge that cannot be used in standard length actions, such as those that accommodate the .30-06 Springfield.
The 8mm Remington Magnum was intended to compete with the .300 Weatherby Magnum and .338 Winchester Magnum. Remington's decision to use a metric bullet may have been prompted by their past success with the 7 mm bore diameter.
Even though the 8mm Remington Magnum has never been very popular, it is a very suitable cartridge for the hunting of elk, moose, caribou, and larger African antelope. However, the .338 Winchester Magnum had a 30-year head start on the market, and is short enough for medium length actions, which increases the models of rifles it could be produced in. It is also available with heavier bullets, although this isn't a problem for people that load their own rounds of this caliber. Bullet selection is quite critical with the 8mm Remington Magnum since the bullets have to be designed and constructed to hold together at magnum velocities.
The 8mm Remington Magnum has 6.43 ml (99 grain) H2O cartridge case capacity.
8mm Remington Magnum maximum C.I.P. cartridge dimensions. All sizes in millimetres (mm).
Americans would define the shoulder angle at alpha/2 = 25 degrees. The common rifling twist rate for this cartridge is 254 mm (1 in 10 in), 6 grooves, Ø lands = 8.00 mm, Ø grooves = 8.20 mm, land width = 3.10 mm and the primer type is large rifle magnum.
According to the official C.I.P. (Commission Internationale Permanente pour l'Epreuve des Armes à Feu Portatives) guidelines the 8mm Remington Magnum case can handle up to 440.00 MPa (63,817 psi) piezo pressure. In C.I.P. regulated countries every rifle cartridge combo has to be proofed at 125% of this maximum C.I.P. pressure to certify for sale to consumers.
This means that 8mm Remington Magnum chambered arms in C.I.P. regulated countries are currently (2014) proof tested at 550.00 MPa (79,771 psi) PE piezo pressure.