Recent from talks
Contribute something to knowledge base
Content stats: 0 posts, 0 articles, 1 media, 0 notes
Members stats: 0 subscribers, 0 contributors, 0 moderators, 0 supporters
Subscribers
Supporters
Contributors
Moderators
Hub AI
Beechcraft Model 17 Staggerwing AI simulator
(@Beechcraft Model 17 Staggerwing_simulator)
Hub AI
Beechcraft Model 17 Staggerwing AI simulator
(@Beechcraft Model 17 Staggerwing_simulator)
Beechcraft Model 17 Staggerwing
The Beechcraft Model 17 Staggerwing is an American biplane with an atypical negative wing stagger (the lower wing is farther forward than the upper wing). It first flew in 1932, and was sold on the civilian market, being used for transport and air racing. During World War II, it was used by allied forces, and after the war continued in civilian production until 1949, with 785 having been produced.
In 1932, Walter H. Beech, formerly head of the aircraft manufacturer Travel Air, left Curtiss-Wright, which had purchased Travel Air in 1929, to set up a new company, Beech Aircraft Corporation, based in Wichita, Kansas. Beech took the airplane designer Ted A. Wells from Curtiss-Wright, and the first project of the new company was the Model 17, a fast biplane with an enclosed cabin designed to meet the needs of business executives. It was based on a design drafted by Wells while at Curtiss-Wright, but rejected by the Curtiss-Wright board. The Beechcraft Model 17, popularly known as the "Staggerwing", was first flown on November 4, 1932. During its heyday, it was used as an executive aircraft, much as the private jet is now, and its primary competition were the Waco Custom Cabin and Waco Standard Cabin series of biplanes.
The Model 17's unusual negative stagger wing configuration (the upper wing staggered behind the lower) and unique shape maximized pilot visibility and was intended to reduce interference drag between the wings (although it was later found to have negligible effect). The fabric-covered fuselage was faired with wood formers and stringers over a welded, steel tube frame. Construction was complex and took many man-hours to complete. The Staggerwing's retractable conventional landing gear, uncommon at that time, combined with careful streamlining, light weight, and a powerful radial engine, helped it perform well.
In the mid-1930s, Beech undertook a major redesign of the aircraft, to create the Model D17 Staggerwing. The D17 featured a lengthened fuselage that improved the aircraft's handling characteristics by increasing control leverage, and the ailerons were relocated to the upper wings, eliminating interference with the flaps. Braking was improved with a foot-operated brake linked to the rudder pedals.
Between April 1936 through May 1940 there were six Model 17 fatal accidents involving midair breakups that were attributed to weather conditions and structural failures, later determined to be caused by flutter of the ailerons and wings. The CAA Bureau of Safety Regulation initially issued an edict to restrict maximum airspeed and instrument flight, which was later replaced by a safety bulletin requiring lead balance weights to be added to the ailerons and flaps, and plywood panels to the outboard portion of the wings to increase torsional stiffness of the wing tip section.
Sales began slowly. The first Staggerwings' high price tag (between US$14,000 and $17,000, depending on engine size) scared off potential buyers in an already depressed civil aircraft market. Only 18 Model 17s were sold during 1933, the first year of production, but sales steadily increased. Each Staggerwing was custom-built by hand. The luxurious cabin, trimmed in leather and mohair, held up to five passengers. Eventually, the Staggerwing captured a substantial share of the passenger aircraft market. By the start of World War II, Beechcraft had sold more than 424 Model 17s.
The Staggerwing's speed made it popular with 1930s air racers. An early version of the Model 17 won the 1933 Texaco Trophy Race. In 1935, a British diplomat, Capt. H.L. Farquhar, successfully flew around the world in a Model B17R, traveling 21,332 miles (34,331 kilometers) from New York to London, by way of Siberia, Southeast Asia, the Middle East, North Africa and back across Europe.
Louise Thaden and Blanche Noyes won the 1936 Bendix trophy in a Model C17R Staggerwing. Thaden also won the Harmon Trophy for her achievement. Jackie Cochran set a women's speed record of 203.9 mph (328 km/h), established an altitude record of over 30,000 feet (9,144 m), and finished third in the 1937 Bendix Trophy Race, all in a special Model D17W Staggerwing. The aircraft made an impressive showing in the 1938 Bendix race, as well.
Beechcraft Model 17 Staggerwing
The Beechcraft Model 17 Staggerwing is an American biplane with an atypical negative wing stagger (the lower wing is farther forward than the upper wing). It first flew in 1932, and was sold on the civilian market, being used for transport and air racing. During World War II, it was used by allied forces, and after the war continued in civilian production until 1949, with 785 having been produced.
In 1932, Walter H. Beech, formerly head of the aircraft manufacturer Travel Air, left Curtiss-Wright, which had purchased Travel Air in 1929, to set up a new company, Beech Aircraft Corporation, based in Wichita, Kansas. Beech took the airplane designer Ted A. Wells from Curtiss-Wright, and the first project of the new company was the Model 17, a fast biplane with an enclosed cabin designed to meet the needs of business executives. It was based on a design drafted by Wells while at Curtiss-Wright, but rejected by the Curtiss-Wright board. The Beechcraft Model 17, popularly known as the "Staggerwing", was first flown on November 4, 1932. During its heyday, it was used as an executive aircraft, much as the private jet is now, and its primary competition were the Waco Custom Cabin and Waco Standard Cabin series of biplanes.
The Model 17's unusual negative stagger wing configuration (the upper wing staggered behind the lower) and unique shape maximized pilot visibility and was intended to reduce interference drag between the wings (although it was later found to have negligible effect). The fabric-covered fuselage was faired with wood formers and stringers over a welded, steel tube frame. Construction was complex and took many man-hours to complete. The Staggerwing's retractable conventional landing gear, uncommon at that time, combined with careful streamlining, light weight, and a powerful radial engine, helped it perform well.
In the mid-1930s, Beech undertook a major redesign of the aircraft, to create the Model D17 Staggerwing. The D17 featured a lengthened fuselage that improved the aircraft's handling characteristics by increasing control leverage, and the ailerons were relocated to the upper wings, eliminating interference with the flaps. Braking was improved with a foot-operated brake linked to the rudder pedals.
Between April 1936 through May 1940 there were six Model 17 fatal accidents involving midair breakups that were attributed to weather conditions and structural failures, later determined to be caused by flutter of the ailerons and wings. The CAA Bureau of Safety Regulation initially issued an edict to restrict maximum airspeed and instrument flight, which was later replaced by a safety bulletin requiring lead balance weights to be added to the ailerons and flaps, and plywood panels to the outboard portion of the wings to increase torsional stiffness of the wing tip section.
Sales began slowly. The first Staggerwings' high price tag (between US$14,000 and $17,000, depending on engine size) scared off potential buyers in an already depressed civil aircraft market. Only 18 Model 17s were sold during 1933, the first year of production, but sales steadily increased. Each Staggerwing was custom-built by hand. The luxurious cabin, trimmed in leather and mohair, held up to five passengers. Eventually, the Staggerwing captured a substantial share of the passenger aircraft market. By the start of World War II, Beechcraft had sold more than 424 Model 17s.
The Staggerwing's speed made it popular with 1930s air racers. An early version of the Model 17 won the 1933 Texaco Trophy Race. In 1935, a British diplomat, Capt. H.L. Farquhar, successfully flew around the world in a Model B17R, traveling 21,332 miles (34,331 kilometers) from New York to London, by way of Siberia, Southeast Asia, the Middle East, North Africa and back across Europe.
Louise Thaden and Blanche Noyes won the 1936 Bendix trophy in a Model C17R Staggerwing. Thaden also won the Harmon Trophy for her achievement. Jackie Cochran set a women's speed record of 203.9 mph (328 km/h), established an altitude record of over 30,000 feet (9,144 m), and finished third in the 1937 Bendix Trophy Race, all in a special Model D17W Staggerwing. The aircraft made an impressive showing in the 1938 Bendix race, as well.
.jpg)