Community hub
Recent from talks
Contribute something to knowledge base
Content stats: 0 posts, 0 articles, 1 media, 0 notes
Members stats: 0 subscribers, 0 contributors, 0 moderators, 0 supporters
Subscribers
Supporters
Contributors
Moderators
Hub AI
Boeing 747SP AI simulator
(@Boeing 747SP_simulator)
Hub AI
Boeing 747SP AI simulator
(@Boeing 747SP_simulator)
Boeing 747SP
The Boeing 747SP (for Special Performance) is a shortened version of the Boeing 747 wide-body airliner, designed for a longer range. It is the highest flying subsonic passenger airliner, with a service ceiling of 45,100 feet (13,700 m). Boeing needed a smaller aircraft to compete with the McDonnell Douglas DC-10 and Lockheed L-1011 TriStar tri-jet wide-bodies, introduced in 1971/1972. Pan Am requested a 747-100 derivative to fly between New York and the Middle East, a request also shared by Iran Air, and the first order came from Pan Am in 1973.
The variant first flew on July 4, 1975, was approved by the Federal Aviation Administration on February 4, 1976, and entered service that year with Pan Am.
The SP is 184 feet 9 inches (56.31 m) in length, 47 feet (14 m) shorter than the original 747 variants. Its main deck doors are reduced to four on each side to suit its lower capacity. The vertical and horizontal tailplanes are larger and its wing flaps have been simplified. With a 700,000-pound (320 t; 320,000 kg) maximum take-off weight, it can fly 276 passengers in three classes over 5,830 nautical miles [nmi] (10,800 km; 6,710 mi). One 747SP was modified into the Stratospheric Observatory for Infrared Astronomy (SOFIA). The last example was delivered in 1987; some were converted to transports of heads of state. Sales did not meet the expected 200 units, and only 45 aircraft were ultimately produced.
The idea for the 747SP came from a request by Pan Am for a 747 variant capable of carrying a full payload non-stop on its longest route between New York and Tehran. Joined with Pan Am's request was Iran Air; their joint interest was for a high-capacity airliner capable of covering Pan Am's New York–Middle Eastern routes and Iran Air's planned New York-Tehran route (New York to Tehran was the longest non-stop commercial flight in the world for a short time). The aircraft was launched with Pan Am's first order in 1973, and the first example was delivered in 1976.
A shorter derivative of the 747-100, the SP was developed to target two market requirements. The first was a need to compete with the DC-10 and L-1011 while maintaining commonality with the 747, which in its standard form was too large for many routes. Until the arrival of the 767, Boeing lacked a mid-sized wide-body to compete in this segment. The second market requirement was an aircraft suitable for the ultra-long-range routes emerging in the mid-1970s following the joint request. These routes needed not only longer range but also higher cruising speeds. Boeing could not afford to develop an all-new design, instead opting to shorten the 747 and optimize it for speed and range, at the expense of capacity.
Originally designated 747SB for "short body", it was later nicknamed "Sutter's balloon" by employees after 747 chief engineer Joe Sutter. Boeing later changed the production designation to 747SP for "special performance", reflecting the aircraft's greater range and higher cruising speed. Production of the 747SP ran from 1976 to 1983. However, a VIP order for UAE's Abu Dhabi Amiri Flight led Boeing to produce one last SP in 1987. Pan Am was the launch customer for the 747SP, taking the first delivery, Clipper Freedom, on March 5, 1976. Pan Am then made the first flight of the 747SP on April 25, 1976, making a nonstop flight from New York to Tokyo.
The 747SP was the longest-range airliner available until the 747-400 entered service in 1989. Despite its technical achievements, the SP never sold as well as Boeing hoped. Increased fuel prices in the mid-1970s to early 1980s, the SP's heavy wings, high cost, and reduced capacity, and the increased ranges of forthcoming airliners were some of the many factors that contributed to its low sales. Only 45 were built. However, some of the engineering work on the 747SP was reused with the development of the 747-300. In the 747SP, the upper deck begins over the section of fuselage that contains the wing box, not ahead of the wing box (as is the case with the 747-100 and 747-200). This same design was used in the 747-300 and newer 747-400, resulting in a stretched upper deck.[citation needed] A proposed variant called Boeing 747 ASB, which based on 747SP's design with advanced improvements found on 747-400, includes new glass cockpit, new engine options, and winglets, was announced in 1986 but cancelled later year due to low interest from airlines and in favor of Boeing 777.
Apart from having a significantly shorter fuselage and one fewer cabin door per side, the 747SP differs from other 747 variants in having simplified flaps and a taller vertical tail to counteract the decrease in yaw moment-arm from the shortened fuselage. The 747SP uses single-piece flaps on the trailing edges, rather than the smaller triple-slotted flaps of standard 747s.
Boeing 747SP
The Boeing 747SP (for Special Performance) is a shortened version of the Boeing 747 wide-body airliner, designed for a longer range. It is the highest flying subsonic passenger airliner, with a service ceiling of 45,100 feet (13,700 m). Boeing needed a smaller aircraft to compete with the McDonnell Douglas DC-10 and Lockheed L-1011 TriStar tri-jet wide-bodies, introduced in 1971/1972. Pan Am requested a 747-100 derivative to fly between New York and the Middle East, a request also shared by Iran Air, and the first order came from Pan Am in 1973.
The variant first flew on July 4, 1975, was approved by the Federal Aviation Administration on February 4, 1976, and entered service that year with Pan Am.
The SP is 184 feet 9 inches (56.31 m) in length, 47 feet (14 m) shorter than the original 747 variants. Its main deck doors are reduced to four on each side to suit its lower capacity. The vertical and horizontal tailplanes are larger and its wing flaps have been simplified. With a 700,000-pound (320 t; 320,000 kg) maximum take-off weight, it can fly 276 passengers in three classes over 5,830 nautical miles [nmi] (10,800 km; 6,710 mi). One 747SP was modified into the Stratospheric Observatory for Infrared Astronomy (SOFIA). The last example was delivered in 1987; some were converted to transports of heads of state. Sales did not meet the expected 200 units, and only 45 aircraft were ultimately produced.
The idea for the 747SP came from a request by Pan Am for a 747 variant capable of carrying a full payload non-stop on its longest route between New York and Tehran. Joined with Pan Am's request was Iran Air; their joint interest was for a high-capacity airliner capable of covering Pan Am's New York–Middle Eastern routes and Iran Air's planned New York-Tehran route (New York to Tehran was the longest non-stop commercial flight in the world for a short time). The aircraft was launched with Pan Am's first order in 1973, and the first example was delivered in 1976.
A shorter derivative of the 747-100, the SP was developed to target two market requirements. The first was a need to compete with the DC-10 and L-1011 while maintaining commonality with the 747, which in its standard form was too large for many routes. Until the arrival of the 767, Boeing lacked a mid-sized wide-body to compete in this segment. The second market requirement was an aircraft suitable for the ultra-long-range routes emerging in the mid-1970s following the joint request. These routes needed not only longer range but also higher cruising speeds. Boeing could not afford to develop an all-new design, instead opting to shorten the 747 and optimize it for speed and range, at the expense of capacity.
Originally designated 747SB for "short body", it was later nicknamed "Sutter's balloon" by employees after 747 chief engineer Joe Sutter. Boeing later changed the production designation to 747SP for "special performance", reflecting the aircraft's greater range and higher cruising speed. Production of the 747SP ran from 1976 to 1983. However, a VIP order for UAE's Abu Dhabi Amiri Flight led Boeing to produce one last SP in 1987. Pan Am was the launch customer for the 747SP, taking the first delivery, Clipper Freedom, on March 5, 1976. Pan Am then made the first flight of the 747SP on April 25, 1976, making a nonstop flight from New York to Tokyo.
The 747SP was the longest-range airliner available until the 747-400 entered service in 1989. Despite its technical achievements, the SP never sold as well as Boeing hoped. Increased fuel prices in the mid-1970s to early 1980s, the SP's heavy wings, high cost, and reduced capacity, and the increased ranges of forthcoming airliners were some of the many factors that contributed to its low sales. Only 45 were built. However, some of the engineering work on the 747SP was reused with the development of the 747-300. In the 747SP, the upper deck begins over the section of fuselage that contains the wing box, not ahead of the wing box (as is the case with the 747-100 and 747-200). This same design was used in the 747-300 and newer 747-400, resulting in a stretched upper deck.[citation needed] A proposed variant called Boeing 747 ASB, which based on 747SP's design with advanced improvements found on 747-400, includes new glass cockpit, new engine options, and winglets, was announced in 1986 but cancelled later year due to low interest from airlines and in favor of Boeing 777.
Apart from having a significantly shorter fuselage and one fewer cabin door per side, the 747SP differs from other 747 variants in having simplified flaps and a taller vertical tail to counteract the decrease in yaw moment-arm from the shortened fuselage. The 747SP uses single-piece flaps on the trailing edges, rather than the smaller triple-slotted flaps of standard 747s.
Recent media
Recent media