Cisco NX-OS

The topic of this article may not meet Wikipedia's general notability guideline. Please help to demonstrate the notability of the topic by citing reliable secondary sources that are independent of the topic and provide significant coverage of it beyond a mere trivial mention. If notability cannot be shown, the article is likely to be merged, redirected, or deleted. Find sources: "Cisco NX-OS" – news · newspapers · books · scholar · JSTOR (June 2024) (Learn how and when to remove this message)

NX-OS is a network operating system for the Nexus-series Ethernet switches and MDS-series Fibre Channel storage area network switches made by Cisco Systems.^[1] It evolved from the Cisco operating system SAN-OS, originally developed for its MDS switches. Cisco is responsible for its development and maintenance.^[1]

The command-line interface of NX-OS is similar to that of Cisco IOS.

Cisco is responsible for development and maintenance of NX-OS.^[1]

• System Manager (sysmgr)
• Persistent Storage Service (PSS)
• Message & Transaction Services (MTS)

• Fibre Channel and FICON
• FCIP
• FCoE (Nexus 5000/7000 linecards)
• iSCSI
• IPsec
• Scheduling
• NPIV NX Port ID Virtualization
• Inter–VSAN Routing
• VSAN
• Zoning (Hard zoning)
• Callhome
• Cisco Fabric Services (distributed configuration)
• SSH and Telnet
• Storage Media Encryption
• Port Channels
• Cisco Data Mobility Manager
• Fibre Channel Write Acceleration

• Nexus B22 (HP, Dell, Fujitsu)
• Nexus 9000 series^[2]
• Nexus 7700 series
• Nexus 7000 series
• Nexus 6000 series
• Nexus 5000 series
• Nexus 4000 (for IBM BladeCenter)
• Nexus 2000 series
• Nexus 3000
• Nexus 1000V
• MDS 9700 FC Directors
• MDS 9500 FC Directors^[3]
• MDS 9250i FC Switch
• MDS 9222i FC Switch
• MDS 9100 FC Switches

This section possibly contains original research. Please improve it by verifying the claims made and adding inline citations. Statements consisting only of original research should be removed. (February 2011) (Learn how and when to remove this message)

• NX-OS does not support the login command to switch users.
• NX-OS does not distinguish between standard or extended access lists, all lists are named and "extended" in functionality.^[4]
• NX-OS did not support scp server prior to 5.1(1) release.
• In NX-OS, there is no "write" command to save the configuration like on IOS (one uses the "copy" command, instead). Instead, command aliases can be created to provide the "write" command.^[5]
• When accessing NX-OS, users authenticate directly to their assigned privilege level.
• SSH server is enabled while Telnet server is disabled by default in NX-OS.^[6]

4.1, 4.2, 5.0, 5.1, 5.2, 6.0, 6.1, 6.2, 7.0, 9.2, 9.3, 10.1

• Cisco IOS
• Cisco IOS XE
• Cisco IOS XR

• Cisco Content Hub
• Cisco Feature Navigator
• intro
• data sheet