Hubbry Logo
GE U50GE U50Main
Open search
GE U50
Community hub
GE U50
logo
7 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
GE U50
GE U50
GE U50
View on Wikipedia
from Wikipedia
GE U50
U50 #50 on an eastbound freight at Laramie, Wyoming.
Type and origin
Power typeDiesel-electric
BuilderGeneral Electric
ModelU50
Build date1963 - 1965
Total produced26
Specifications
Configuration:
​
 • AARB+B-B+B
Gauge4 ft 8+1⁄2 in (1,435 mm)
Trucks4
Length83 ft 6.5 in (25.46 m)
Fuel typeDiesel
Prime moverDual GE FDL-16
Engine typeDiesel
AspirationTurbocharger
Traction motors8
Cylinders2x V16 Engine
TransmissionDiesel electric
Loco brakeAir Independent Brake, Dynamic brakes
Train brakesWestinghouse air brake
Performance figures
Maximum speed70 mph (110 km/h)
Power output5,000 hp (3,700 kW)
Tractive effortStarting: 160,000 lbf (710 kN)
Continuous: 139,500 lbf (621 kN)
Career
OperatorsUnion Pacific Railroad
Southern Pacific Railroad
NicknamesU-Boats (UP)
Baby Hueys (SP)
LocaleNorth America
Delivered1963 - 1965
Retired1973 - 1977
DispositionAll scrapped

The GE U50 was an eight-axle, 5,000 hp (3,700 kW) diesel-electric locomotive built by GE Transportation. They were twin-engined locomotives, combining two 2,500 hp (1,900 kW) diesel engines on one frame.

Configuration and History

[edit]

The U50 rode on four two-axle trucks, grouped in pairs linked by span bolsters, giving a wheel arrangement of B+B-B+B. The trucks and bolsters were re-used from scrapped UP turbine locomotives built by GE during the 1950s. Owing to the wheel arrangement, the U50 was sometimes inaccurately referred to as the U50D, a back-formation from the U50C name given to the six-axle units. The name is incorrect and was never used by the manufacturer or the railroad. None of the U50s rode on D trucks in any case. It is also sometimes referred to as the U50B,[1] but this is incorrect as well.

The U50 was built in response to the Union Pacific Railroad's requirement, issued in the early 1960s, for a 15,000 hp (11,200 kW) 3-unit locomotive intended to replace the turbines. The design was effectively two U25B locomotives on a single frame; each diesel engine and generator powered only the two trucks at the same end. Three were delivered to the UP in October 1963, and three to the Southern Pacific Railroad in May and June 1964. Other locomotives built to this requirement were the EMD DD35A and the ALCO Century 855.

The Southern Pacific kept the three but did not order any more. They were kept on the roster until the late 1970s but were often sidelined. While the UP's units were nicknamed "U-Boats", the SP's units gained the nickname "Baby Hueys" from the cartoon character of the same name.[2] Original numbers were #8500 - #8502; they were later renumbered #9550 - #9552 and renumbered again to #9950 - #9952. Southern Pacific's three units differed from the Union Pacific U50s by having a cab door and headlights in the hood beneath the front windows.

The Union Pacific was more satisfied with their three and ordered 20 more. A batch of 12 were delivered between July and September 1964, while a final eight were built May through August 1965. They were numbered #31 - #53. UP #52 was delivered with a Cummins PT fuel system and rated at 5,600 horsepower. The #52 had a standard fuel system installed in October 1966 and was rerated to 5,000 horsepower.

Twenty of the Union Pacific U50s were withdrawn from service in 1973 and 1974 and traded in to GE for U30Cs. The last three Union Pacific units remained on the roster until April 1977. The Southern Pacific's three survived in service until 1977. All of the Union Pacific "U-Boats" and Southern Pacific "Baby Hueys" were sold for scrap by 1977.

See also

[edit]

References

[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

GE U50

View on Grokipedia
from Grokipedia
The GE U50 is an experimental eight-axle diesel-electric locomotive model developed by (GE) Transportation Systems in the early , featuring twin 16-cylinder FDL prime movers that delivered a combined 5,000 horsepower for high-capacity freight operations. Designed as a high-horsepower solution to reduce crew and fuel costs during the era's diesel power race, it combined elements of two standard units into a single, elongated frame spanning 83 feet 6 inches and weighing 558,000 pounds. Production of the U50 ran from 1963 to 1965, yielding a total of 26 units: 23 for Union Pacific (UP) and 3 for Southern Pacific (SP). UP deployed its fleet primarily on heavy coal and merchandise trains across the West, where the locomotive's 160,000-pound starting and 70 mph top speed proved advantageous, though its massive size contributed to accelerated track wear and occasional reliability issues from the rushed design. The SP units, numbered 9950–9952 and nicknamed "Baby Hueys" for their bulky appearance, were similarly twin-engined but saw limited service due to vulnerabilities like the loss of half its power if one engine failed; they were among the first SP locomotives stored during a mid-1970s power surplus and scrapped before 1975. All original U50s were retired and scrapped by 1977, marking the end of their short operational life. A related variant, the , emerged later as an improved model with twin 12-cylinder FDL engines, a lighter 417,000-pound weight, and a shorter 79-foot , utilizing reused six-wheel trucks from UP's earlier gas-turbine locomotives. Built between September 1969 and January 1971 exclusively for UP (40 units, numbered 5000–5039), the U50C addressed some predecessor flaws but faced problems like electrical fires and frame cracks; it was UP's last double-diesel acquisition and fully retired by 1978, with all units scrapped in 1979. These locomotives represented GE's ambitious push into multi-engined designs for North American railroads but ultimately highlighted the challenges of such unconventional in mainstream freight service.

Development

Background and Requirements

In the early , the American railroad industry was engaged in an intense "horsepower race" among manufacturers, as railroads sought more powerful diesel locomotives to handle increasing freight volumes and replace older and early diesel technologies. (GE) aimed to challenge Electro-Motive Division (EMD)'s dominance with high-output models like the 3,000 hp SD40, pushing for innovations in single-unit designs exceeding 4,000 hp to improve efficiency and reduce operating costs. Union Pacific Railroad (UP) played a pivotal role in driving this competition, issuing a formal specification on December 4, 1962, for a 5,000 hp to address the inefficiencies of its gas turbine-electric fleet. UP's 8,500 hp gas turbine units, introduced in the , were being phased out due to exorbitant fuel consumption—approximately twice that of conventional diesels—and rising oil prices, which made them economically unviable for long-term service. Initially, UP envisioned a three-unit lashup delivering a combined 15,000 hp while maintaining operational flexibility, but GE countered with a proposal for a single, twin-engined 5,000 hp unit that promised better reliability and lower maintenance. This UP request prompted GE to initiate design work in early 1963, marking the start of the U50 project tailored to heavy-haul needs. Southern Pacific Railroad (SP) also expressed interest in such high-horsepower units, seeking robust power for challenging routes like the steep grades of , where double-heading or multi-unit consists were common for freight operations.

Production and Orders

The GE U50 locomotives were manufactured by at its plant, with a total of 26 units produced between October 1963 and August 1965. This limited production run was driven primarily by orders from the , which sought high-horsepower units to replace its gas-turbine fleet. Each locomotive cost approximately $457,000 in period pricing. Union Pacific received 23 U50s, numbered 31 through 53, with deliveries beginning in October 1963. The first three units (UP 31–33) were completed and tested that month, serving as prototypes that validated the twin-engined design before full-scale output. Subsequent batches followed: 12 units (UP 34–45) in July through September 1964, and the final eight (UP 46–53) from May through August 1965. The Southern Pacific Railroad ordered the remaining three units, delivered in May and June 1964 and initially numbered 8500–8502. These were later renumbered to 9550–9552 in 1965 and then to 9950–9952 in 1969 as part of SP's locomotive classification updates. No additional orders were placed by other railroads, limiting the U50 to these two customers.

Design

Mechanical Configuration

The GE U50 diesel-electric locomotive employed a B+B-B+B , featuring eight powered axles arranged on four two-axle B-B trucks, which ensured stable power distribution and for its 5,000 horsepower rating across heavy freight operations. This configuration allowed the locomotive to handle high tractive efforts while maintaining ride quality on mainline tracks. The mechanical structure centered on a single rigid frame that integrated the core components of two standard U25B locomotives, resulting in an overall length of 83 feet 6 inches (25.46 m). This design approach facilitated the dual-engine setup without compromising structural integrity, with the frame supporting the extended carbody that housed separate sections at each end. The trucks were span-bolstered AAR Type-B units, each with two axles, repurposed from Union Pacific's scrapped second-generation gas turbine locomotives (numbers 61–75, known as "Verandas"). This reuse improved weight distribution across the eight axles, contributing to the locomotive's total weight of 558,000 pounds (279 short tons) and an approximate axle loading of 35 tons per axle. Southern Pacific's three U50 units incorporated distinct modifications for operational needs, including a to facilitate crew access and additional hood-mounted headlights positioned beneath the front cab windows—features absent on Union Pacific examples.

Powertrain and Electrical Systems

The GE U50 employed a dual diesel-electric , utilizing two turbocharged GE 7FDL16 four-stroke, 16-cylinder engines arranged in a V configuration, each developing 2,500 horsepower (1,860 kW) at a maximum speed of 1,050 rpm. This setup, derived from the proven FDL series used in earlier GE models like the U25B, allowed each engine to independently power one end of the locomotive while sharing the overall frame and auxiliaries for efficiency. The combined output reached 5,000 horsepower (3,700 kW), enabling high-traction freight service on demanding routes. Each 7FDL16 was directly coupled to a dedicated GE GT588 main generator, which converted mechanical energy into (DC) electrical power rated for the locomotive's high-demand operations. The generators supplied power to separate groups of traction , with the forward generator driving the four on the leading trucks and the rear generator powering those on the trailing trucks. This isolated configuration minimized electrical interference between the powerplants and enhanced reliability under load. Power delivery to the rails was handled by eight GE 752 series-wound DC traction motors, one mounted on each of the locomotive's eight axles. These motors supported series-parallel transition control, allowing the to adjust voltage and current distribution across the axles for optimized starting and sustained speed, typically managed through an eight-notch lever that incrementally increased engine speed and field excitation. The fuel system comprised two divided tanks with a total capacity of 5,800 US gallons (22,000 L) of , positioned to feed each engine separately and ensure balanced consumption during operation. Cooling was provided by separate sections at each end of the carbody, one dedicated to each engine, with individual thermostats and fans providing precise heat regulation for the dual powerplants and auxiliaries like the air compressors and exciters.

Specifications

Dimensions and Weight

The GE U50 was an eight-axle diesel-electric locomotive designed for heavy freight service, featuring a compact yet robust physical profile to accommodate its dual-engine configuration. Its overall length measured 83 feet 6 inches (25.45 m) over the coupler pulling faces, allowing it to navigate standard railroad curves while maximizing power output. The width was 10 feet 3.5 inches (3.13 m) including handrails, and the height reached 15 feet 10.75 inches (4.84 m) from the top of the rail to the top of the cab. The total spanned 60 feet 2 inches (18.34 m), with each B-B having a rigid wheelbase of 9 feet 4 inches (2.84 m). The locomotive's service weight was 558,000 pounds (253,000 kg), distributed across eight s for an axle loading of approximately 69,750 pounds (31,640 kg) per axle.
DimensionImperialMetric
Length over coupler pulling faces83 ft 6 in25.45 m
Width over handrails10 ft 3.5 in3.13 m
Height above top of rail15 ft 10.75 in4.84 m
Total 60 ft 2 in18.34 m
Truck wheelbase9 ft 4 in2.84 m
Total weight558,000 lb253,000 kg
69,750 lb31,640 kg

Performance Characteristics

The GE U50 produced a total of 5,000 horsepower (3,730 kW) at the rails, derived from its twin diesel engines each rated at 2,500 horsepower. This configuration provided substantial power for heavy freight hauling, surpassing many single-engine contemporaries in raw output while maintaining reliability for extended operations. Starting reached 160,000 lbf (710 kN), enabling the U50 to initiate movement of massive train consists on grades or from rest. Continuous was rated at 139,500 lbf (620 kN) at 8.5 mph, allowing sustained performance during low-speed, high-load scenarios typical of overland freight routes. With a gear of 74:18 optimized for freight duties, the maximum speed was limited to 70 mph (113 km/h), emphasizing pulling power over . Dynamic was achieved through the traction motors acting as generators, with resistive grids dissipating the recovered energy as heat to control descent and reduce wear on mechanical brakes. Fuel consumption at full load averaged approximately 150–200 gallons per hour, offering better efficiency than the gas turbine-electric locomotives it replaced—such as Union Pacific's GTELs, which exceeded gallons per hour—yet remaining elevated relative to smaller diesel units of the mid-1960s due to the dual-engine setup.

Operational History

Union Pacific Railroad

The Union Pacific Railroad ordered 23 GE U50 locomotives to replace its aging gas turbine fleet, with deliveries beginning in October 1963 as the first high-horsepower diesel-electric units designed for three-unit lashups delivering a combined 15,000 horsepower. Numbered UP 31–53, these eight-axle, 5,000-horsepower machines were deployed primarily on the Overland Route for heavy freight service, including unit coal trains from Wyoming mines and general merchandise hauls across the transcontinental mainline. Their dual 2,500-horsepower prime movers allowed operation in sets of three, reducing the number of locomotives needed per train while aiming to boost speeds and efficiency against trucking competition. Entering revenue service in late 1963 on the mainline, the U50s initially handled demanding eastbound freights over grades like Sherman Hill, where their power proved advantageous for accelerating heavy consists. However, the locomotives' experimental led to frequent reliability issues stemming from the integration of two independent engines under a single frame, including synchronization challenges between the prime movers and electrical systems. At 279 tons, their excessive weight also caused accelerated track and roadbed wear, contributing to high maintenance costs that exceeded expectations. By 1970, due to these persistent problems, Union Pacific reassigned many U50s from primary heavy-haul duties to lighter secondary services, such as local freights and yard work. The fleet remained in intermittent use through 1973 for merchandise trains, but escalating repair demands prompted progressive withdrawals, with most units retired by 1974 and the last three active until 1977.

Southern Pacific Railroad

The Southern Pacific Railroad acquired three GE U50 locomotives in 1964, numbered 8500–8502 (later renumbered to 9550–9552 and then 9950–9952), to evaluate high-horsepower units for handling heavy freight loads on challenging terrain, including the steep grades of . These twin-engine, 5,000-horsepower machines were part of a small experimental fleet aimed at improving traction and power output for drag operations on the railroad's routes. Assigned primarily to the Los Angeles Division, the U50s were employed in heavy drag freight service, often hauling lengthy trains through the landscape. Due to the limited number of units, they were frequently paired with locomotives to form mixed consists that provided reliable power for demanding assignments. Their bulky, eight-axle design earned them the nickname "Baby Hueys," a reference to the cartoon character's oversized, awkward appearance, reflecting their distinctive profile on the SP roster. To better suit Southern Pacific's operating environment, the units received modifications including cab-side doors for improved crew access and hood-mounted headlights below the front windows for enhanced visibility during night operations and in varied conditions. However, their substantial 558,000-pound weight contributed to track wear concerns and restricted their deployment on lighter branch lines, leading to more selective use compared to standard road locomotives. The U50s remained in service through the early 1970s but saw declining utilization amid a surplus of power and reliability issues with the dual-engine setup; all three were retired by 1977 and scrapped in 1979.

Retirement and Legacy

Withdrawal from Service

The GE U50 locomotives began their withdrawal from service in the early 1970s, primarily driven by operational challenges faced by their primary operators, the (UP) and Southern Pacific Railroad (SP). For UP, which rostered 23 units, retirements commenced in September 1973, with 17 locomotives withdrawn by February 1974; an additional three followed in November 1974, leaving the final three in service until 1977. SP, with its three units, retired them progressively, with the last example, numbered 8502 (later renumbered 9952), withdrawn by 1977. Key factors contributing to the early retirement included the inherent complexity of the dual-engine design, which resulted in frequent mechanical breakdowns and elevated demands. These issues were compounded by the locomotives' excessive of 279 tons, which accelerated track and infrastructure wear on routes not designed for such loads. Additionally, the U50's fuel consumption proved inefficient compared to emerging single-engine alternatives, particularly amid the that spiked diesel prices and intensified scrutiny on operational economics. UP's acquisition of more reliable locomotives starting in 1972 further hastened the phase-out, as these newer units offered better availability and lower long-term costs. In their , UP's remaining U50s were relegated to helper service in challenging grade , such as those in and , where their high horsepower could still provide value despite reliability shortcomings. SP's units saw similar demotion, with at least one (#36 on UP, but analogous for SP) cannibalized for parts to sustain the fleet's operation. By 1977, all U50s across both railroads had been fully retired. All 26 U50 locomotives were ultimately scrapped or traded back to manufacturers like GE, with no examples placed in storage, rebuilt, or preserved for posterity; the last dispositions occurred by , primarily at scrap yards such as Erman-Howell.

Impact and Successors

The GE U50's twin-engine configuration, while innovative for achieving 5,000 horsepower in a single unit, highlighted significant reliability challenges inherent to multi-engine designs, including increased complexity in electrical systems, cooling, and , which contributed to frequent failures and higher operational costs. These issues prompted to pivot toward single-engine architectures in subsequent models, such as the U30C introduced in 1966, which utilized a more reliable 3,000-horsepower FDL-12 prime mover and proved far more successful with 600 units produced through 1976. The U50 directly influenced the development of the U50C, a refined variant built exclusively for the Union Pacific between 1969 and 1971, incorporating modifications like centralized radiator sections and improved designs but retaining the dual 2,500-horsepower engines; however, persistent problems with frame cracks and electrical fires led to its early retirement. This experience accelerated the broader industry shift away from multi-unit power plants toward high-output single-engine locomotives, contributing to the evolution of GE's Dash 8 series in the , which emphasized modular, single-engine designs for enhanced durability and efficiency. Although the U50 advanced high-horsepower freight by demonstrating the feasibility of compact, powerful units for heavy-haul operations, its excessive —558,000 pounds—underscored the need for better axle-load distribution, influencing the of six-axle configurations like EMD's SD45 to balance power with track-friendly limits. Despite these commercial limitations, with only 26 units built compared to thousands of competing models, the U50 era bolstered GE's reputation for innovation, aiding the company's growth in the late and as railroads favored its evolving single-engine lineup over rivals. None of the U50 units were preserved, with all scrapped by the late due to and wreck damage, though their legacy endures through extensive railfan documenting their unique "whirlybird" silhouette and in model railroading, including detailed HO-scale replicas produced by Athearn.
Add your contribution
Related Hubs
User Avatar
No comments yet.