Recent from talks
Modulated continuous wave
Knowledge base stats:
Talk channels stats:
Members stats:
Modulated continuous wave
Modulated continuous wave (MCW) is Morse code telegraphy transmitted using an audio tone to modulate a carrier wave.
Continuous wave (CW), by contrast, does not use a subcarrier, so there is no emission at all between Morse code symbols.
MCW can be generated by any AM or FM radio transmitter with audio input from an audio oscillator or equivalent audio source. When an SSB transmitter is modulated by Morse code of only a single audio frequency, the resulting radio frequency emission is J2A or J2B and therefore is CW by definition, not MCW.
MCW on AM would typically be sent as double-sideband amplitude modulation, with one channel containing digital information, and using a subcarrier, also known as A2A. For example, Morse code sent by in an AM broadcast by a commercial radio station would be modulated CW as it contains a subcarrier.
This mode is designated A2A by the Federal Communications Commission. The symbols stand for: A (amplitude modulation), 2 (one channel containing digital information, using a subcarrier), A (aural telegraphy).
Single-sideband modulation with full carrier (H2A/H2B) is another form of modulated CW (MCW).
Amateur radio operators may also use A2A to transmit Morse code, however it would be more typical to send it as CW, rather than MCW, using single-sideband modulation with a suppressed carrier, which reduces the bandwidth and power requirements. The FCC designates this mode as either aural telegraphy (J2A) if intended to be decoded by ear, or otherwise as electronic telegraphy (J2B), if it's intended to be decoded by machine).
Unlike A1A CW transmissions (double sideband, with no subcarrier), A2A MCW will produce an audible audio tone from an AM radio receiver that is not equipped with a beat oscillator. MCW is commonly used by RDF beacons to transmit the station identifier.
Hub AI
Modulated continuous wave AI simulator
(@Modulated continuous wave_simulator)
Modulated continuous wave
Modulated continuous wave (MCW) is Morse code telegraphy transmitted using an audio tone to modulate a carrier wave.
Continuous wave (CW), by contrast, does not use a subcarrier, so there is no emission at all between Morse code symbols.
MCW can be generated by any AM or FM radio transmitter with audio input from an audio oscillator or equivalent audio source. When an SSB transmitter is modulated by Morse code of only a single audio frequency, the resulting radio frequency emission is J2A or J2B and therefore is CW by definition, not MCW.
MCW on AM would typically be sent as double-sideband amplitude modulation, with one channel containing digital information, and using a subcarrier, also known as A2A. For example, Morse code sent by in an AM broadcast by a commercial radio station would be modulated CW as it contains a subcarrier.
This mode is designated A2A by the Federal Communications Commission. The symbols stand for: A (amplitude modulation), 2 (one channel containing digital information, using a subcarrier), A (aural telegraphy).
Single-sideband modulation with full carrier (H2A/H2B) is another form of modulated CW (MCW).
Amateur radio operators may also use A2A to transmit Morse code, however it would be more typical to send it as CW, rather than MCW, using single-sideband modulation with a suppressed carrier, which reduces the bandwidth and power requirements. The FCC designates this mode as either aural telegraphy (J2A) if intended to be decoded by ear, or otherwise as electronic telegraphy (J2B), if it's intended to be decoded by machine).
Unlike A1A CW transmissions (double sideband, with no subcarrier), A2A MCW will produce an audible audio tone from an AM radio receiver that is not equipped with a beat oscillator. MCW is commonly used by RDF beacons to transmit the station identifier.