Recent from talks
NAPLPS
Knowledge base stats:
Talk channels stats:
Members stats:
NAPLPS
NAPLPS (North American Presentation Layer Protocol Syntax) is a graphics language for use originally with videotex and teletext services. NAPLPS was developed from the Telidon system developed in Canada, with a small number of additions from AT&T Corporation. The basics of NAPLPS were later used as the basis for several other microcomputer-based graphics systems.
The Canadian Communications Research Centre (CRC), based in Ottawa, had been working on various graphics systems since the late 1960s, much of it led by Herb Bown. Through the 1970s they turned their attention to building out a system of "picture description instructions", which encoded graphics commands as a text stream.
Graphics were encoded as a series of instructions (graphics primitives) each represented by a single ASCII character. Graphic coordinates were encoded in multiple 6-bit strings of XY coordinate data, flagged to place them in the printable ASCII range so that they could be transmitted with conventional text transmission techniques. ASCII SI/SO characters were used to differentiate the text from graphic portions of a transmitted "page". These instructions were decoded by separate programs to produce graphics output, on a plotter for instance. Other work produced a fully interactive version. In 1975, the CRC gave a contract to Norpak to develop an interactive graphics terminal that could decode the instructions and display them on a color display.
During this period, a number of companies were developing the first teletext systems, notably the BBC's Ceefax system. Ceefax encoded character data into the lines in the vertical blanking interval of normal television signals where they could not be seen on-screen, and then used a buffer and decoder in the user's television to convert these into "pages" of text on the display. The Independent Broadcasting Authority quickly introduced their own ORACLE system, and the two organizations subsequently agreed to use a single standard, the "Broadcast Teletext Specification". This later became World System Teletext.
At about the same time, other organizations were developing videotex systems, similar to teletext except they used modems to transmit their data instead of television signals. This was potentially slower and used up a telephone line, but had the major advantage of allowing the user to transmit data back to the sender. The UK's General Post Office developed a system using the Ceefax/ORACLE standard, launching it as Prestel, while France prepared the first steps for its ultimately very successful Minitel system, using a rival display standard called Antiope.
By 1977, the Norpak system was running, and from this work the CRC decided to create their own teletext/videotext system. Unlike the systems being rolled out in Europe, the CRC decided from the start that the system should be able to run on any combination of communications links. For instance, it could use the vertical blanking interval to send data to the user, and a modem to return selections to the servers. It could be used in a one-way or two-way system.
In teletext mode, character codes were sent to users' televisions by encoding them as dot patterns in the vertical blanking interval of the video signal. Various technical "tweaks" and details of the NTSC signals used by North American televisions allowed the downstream videotex channel to increase to 600 bit/s, about twice that used in the European systems. In videotext mode, Bell 202 modems were typical, offering a 1,200 bit/s download rate. A set top box attached to the TV decoded these signals back into text and graphics pages, which the user could select among.
The system was publicly launched as Telidon on August 15, 1978. Compared to the European standards, the CRC system was faster, bi-directional, and offered real graphics as opposed to simple character graphics. The downside of the system was that it required much more advanced decoders, typically featuring Zilog Z80 or Motorola 6809 processors with RGB and/or RF output. The Innovation, Science and Economic Development Canada (then Department of Communications) launched a four-year plan to fund public roll-outs of the technology in an effort to spur the development of a commercial Telidon system.
Hub AI
NAPLPS AI simulator
(@NAPLPS_simulator)
NAPLPS
NAPLPS (North American Presentation Layer Protocol Syntax) is a graphics language for use originally with videotex and teletext services. NAPLPS was developed from the Telidon system developed in Canada, with a small number of additions from AT&T Corporation. The basics of NAPLPS were later used as the basis for several other microcomputer-based graphics systems.
The Canadian Communications Research Centre (CRC), based in Ottawa, had been working on various graphics systems since the late 1960s, much of it led by Herb Bown. Through the 1970s they turned their attention to building out a system of "picture description instructions", which encoded graphics commands as a text stream.
Graphics were encoded as a series of instructions (graphics primitives) each represented by a single ASCII character. Graphic coordinates were encoded in multiple 6-bit strings of XY coordinate data, flagged to place them in the printable ASCII range so that they could be transmitted with conventional text transmission techniques. ASCII SI/SO characters were used to differentiate the text from graphic portions of a transmitted "page". These instructions were decoded by separate programs to produce graphics output, on a plotter for instance. Other work produced a fully interactive version. In 1975, the CRC gave a contract to Norpak to develop an interactive graphics terminal that could decode the instructions and display them on a color display.
During this period, a number of companies were developing the first teletext systems, notably the BBC's Ceefax system. Ceefax encoded character data into the lines in the vertical blanking interval of normal television signals where they could not be seen on-screen, and then used a buffer and decoder in the user's television to convert these into "pages" of text on the display. The Independent Broadcasting Authority quickly introduced their own ORACLE system, and the two organizations subsequently agreed to use a single standard, the "Broadcast Teletext Specification". This later became World System Teletext.
At about the same time, other organizations were developing videotex systems, similar to teletext except they used modems to transmit their data instead of television signals. This was potentially slower and used up a telephone line, but had the major advantage of allowing the user to transmit data back to the sender. The UK's General Post Office developed a system using the Ceefax/ORACLE standard, launching it as Prestel, while France prepared the first steps for its ultimately very successful Minitel system, using a rival display standard called Antiope.
By 1977, the Norpak system was running, and from this work the CRC decided to create their own teletext/videotext system. Unlike the systems being rolled out in Europe, the CRC decided from the start that the system should be able to run on any combination of communications links. For instance, it could use the vertical blanking interval to send data to the user, and a modem to return selections to the servers. It could be used in a one-way or two-way system.
In teletext mode, character codes were sent to users' televisions by encoding them as dot patterns in the vertical blanking interval of the video signal. Various technical "tweaks" and details of the NTSC signals used by North American televisions allowed the downstream videotex channel to increase to 600 bit/s, about twice that used in the European systems. In videotext mode, Bell 202 modems were typical, offering a 1,200 bit/s download rate. A set top box attached to the TV decoded these signals back into text and graphics pages, which the user could select among.
The system was publicly launched as Telidon on August 15, 1978. Compared to the European standards, the CRC system was faster, bi-directional, and offered real graphics as opposed to simple character graphics. The downside of the system was that it required much more advanced decoders, typically featuring Zilog Z80 or Motorola 6809 processors with RGB and/or RF output. The Innovation, Science and Economic Development Canada (then Department of Communications) launched a four-year plan to fund public roll-outs of the technology in an effort to spur the development of a commercial Telidon system.