Paraw (also spelled parao) are various double outrigger sail boats in the Philippines. It is a general term (similar to the term bangka) and thus can refer to a range of ship types, from small fishing canoes to large merchant lashed-lug plank boats (balangay or baloto) with two outriggers (katig) propelled by sails (usually a large crab-claw sail opposite a smaller triangular foresail)

The word paraw (also spelled parao) is a cognate of the terms proa of the Pacific Islands, and perahu or prau of Malay-Indonesia. It refers to outrigger boats propelled by sails (layag). It is a type of bangka, the wider term used for boats (with or without outriggers) in the Philippines.

The paraw has three major elements that make it a paraw: the bangka (canoe or main hull), the katig (outriggers), and the layag (sails). Motorized versions of bangkas (with outriggers) are commonly known as pump boats and are used for inter-island travel.

Paraws can sail between 11 and 17 knots (20~31 km/h). The outriggers (ama), or katig, are made of wood or bamboo, and may be straight or curved upward much like skis.

Traditionally these boats have been made from dungon, guisoc, ipil, duca, baslayan, obacya, bayog, Philippine mahogany (lawaan), basa and molave. Modern versions use plywood. The ropes of the boats are traditionally made from abaca (Manila hemp), but are now often synthetic rope.

The main hull (excluding outriggers) is called a bangka for dugout canoes or baloto (also balangay, baroto, biroko, biray, etc.) for hulls made of planks secured with lashed lugs. The boat itself may be classified by passenger capacity as isahan ('for one [person]') or duwahan ('for two [persons]'), but the paraw usually has capacity for more than two people, leading to its use in ferrying small groups of passengers and goods between islands. The narrow cross-section of the boat made it sleek, cutting across water without a lot of drag.

The two katig or outriggers usually made from bamboo or various kinds of wood and served as counterpoise so that the boat would not easily overturn. They are attached to the boat via tarik (akas). The presence of the outriggers negates the need for a heavy keel and therefore reduces the overall weight of the paraw without sacrificing stability.

The layag or main sail may be made of anything from woven mats, cloth, canvas even sack cloth. Traditionally the main sail is similar to a lateen rig or a crabclaw sail and is attached to a vertical and horizontal spar, the sail differs from a traditional lateen rig in that the vertical spar is parallel to the mast and does not suffer from bad tack. The sail's spar may be as long as the mast, unattached and may appear to be longer than the mast when attached to it. There are no guidelines as to how the main sail is shaped but it may approximate an equilateral triangle. The paraw is also equipped with a foresail or jib and adds to the overall surface area and generated thrust derived from the wind. A variation of the paraw with rectangular sails is the vinta.