Hubbry Logo
ReadyBoostReadyBoostMain
Open search
ReadyBoost
Community hub
ReadyBoost
logo
7 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
ReadyBoost
ReadyBoost
ReadyBoost
View on Wikipedia
from Wikipedia
ReadyBoost
DeveloperMicrosoft
Operating systemMicrosoft Windows
Service nameReadyBoost (EMDMgmt)
TypeDisk Cache

ReadyBoost (codenamed EMD[1]) is a disk caching software component developed by Microsoft for Windows Vista and included in later versions of Windows. ReadyBoost enables NAND memory mass storage CompactFlash, SD card, and USB flash drive devices to be used as a cache between the hard drive and random access memory in an effort to increase computing performance. ReadyBoost relies on the SuperFetch and also adjusts its cache based on user activity. ReadyDrive for hybrid drives is implemented in a manner similar to ReadyBoost.[2]

Overview

[edit]

Using ReadyBoost-capable flash memory (NAND memory devices) for caching allows Windows Vista and later to service random disk reads with better performance than without the cache. This caching applies to all disk content, not just the page file or system DLLs. USB flash devices typically are faster than mechanical hard disks for random access, and slower than mechanical hard disks for sequential access. Gaining the benefit of caching implies that ReadyBoost will access the flash memory for random bits of data. Accordingly, ReadyBoost includes logic that recognizes large, sequential read requests and has the hard disk service these requests instead.[3]

When a compatible device is plugged in, the Windows AutoPlay dialog offers an additional option to use the flash drive to speed up the system; an additional ReadyBoost tab is added to the drive's properties dialog where the amount of space to be used can be configured.[4] The minimum cache size is 250 MB. In Vista or with FAT32 formatting of the drive, the maximum is 4 GB. In Windows 7 or later with NTFS or exFAT formatting, the maximum cache size is 32 GB per device. Windows Vista allows only one device to be used, while Windows 7 allows multiple caches, one per device, up to a total of 256 GB.[5]

ReadyBoost compresses and encrypts all data that is placed on the flash device with AES-128; Microsoft has stated that a 2:1 compression ratio is typical, so a 4 GB cache would usually contain 8 GB of data.[6]

Requirements

[edit]

For a device to be compatible and useful, it must conform to these requirements:

  • The removable media's capacity must be at least 256 MB[7] (250 MB after formatting, Windows 7 reports in its Event Log a required minimum of 235 MB).
  • Windows 7 allows up to eight devices for a maximum of 256 GB of additional memory,[8] with up to 32 GB on a single storage device.[9]
  • The device must have an access time of 1 ms or less.
  • The device must be capable of 2.5 MB/s read speeds for 4 kB random reads spread uniformly across the entire device, and 1.75 MB/s write speeds for 512 kB random writes spread uniformly across the device.[10]
  • The Microsoft Windows Client Performance group recommends a flash-memory-to-system-RAM ratio of between 1:1 and 2.5:1.[3]

Other considerations:

  • Vista's ReadyBoost supports NTFS, FAT16, and FAT32 from SP1 onwards. Windows 7 also supports the newer exFAT file system. As the ReadyBoost cache is stored as a file, the flash drive must be formatted as FAT32, NTFS, or exFAT in order to have a cache size greater than FAT16's 2 GB filesize limit; if the desired cache size is 4 GB (the FAT32 filesize limit) or larger, the drive must be formatted as NTFS or exFAT. The performance differences between these file systems are negligible with ReadyBoost.
  • The initial release of ReadyBoost for Windows Vista supported one device. Windows 7 supports multiple flash drives for ReadyBoost, so performance improvement similar to RAID 0 can be expected.
  • The ReadyBoost algorithm was improved in Windows 7, resulting in better performance. One experiment showed reading of flash memory up to 5–10 times faster than Windows Vista due to higher hit rate.[citation needed]
  • Because ReadyBoost stores its cache as a file on the root directory of the drive rather than using the flash memory without a file system, the file system must be mounted. The ReadyBoost cache is created on the root directory of the drive.
  • If the system drive (the primary drive, with Windows system files on it) is a solid-state drive (SSD), ReadyBoost is disabled, since reading from that drive would be at least as fast as reading from the ReadyBoost drive.[7]
  • ReadyBoost caches all data as it is being written to the local hard disk: "the Ecache.sys device driver intercepts all reads and writes to local hard disk volumes (C:\, for example), and copies any data being written into the caching file that the service created."[6] SuperFetch pre-populates frequently-read data into ReadyBoost cache, so SuperFetch is necessary for ReadyBoost to perform well.[11]
  • ReadyBoost is not compatible with portable media devices such as mobile phones or cameras, or other devices with emulated storage.

ReadyBoost is not available on Windows Server 2008.[12] Since version 22H2, Microsoft removed ReadyBoost in Windows 11.[13]

Performance

[edit]

A system with 512 MB of RAM (the minimum requirement for Windows Vista) can see significant gains from ReadyBoost.[14][15] In one test case, adding 1 GB of ReadyBoost memory sped up an operation from 11.7 seconds to 2 seconds. However, increasing the physical memory (RAM) from 512 MB to 1 GB (without ReadyBoost) reduced it to 0.8 seconds.[16] System performance with ReadyBoost can be monitored by Windows Performance Monitor.[17] As the price of RAM decreased and more RAM was installed in computers, the mitigations provided by ReadyBoost to systems with insufficient memory decreased.

The core idea of ReadyBoost is that a flash memory (e.g. a USB flash drive or an SSD) has a much faster seek time than a typical magnetic hard disk (less than 1 ms), allowing it to satisfy requests faster than reading files from the hard disk. It also leverages the inherent advantage of two parallel sources from which to read data, whereas Windows 7 enables the use of up to eight flash drives at once, allowing up to nine parallel sources. USB 2.0 flash drives are slower for sequential reads and writes than modern desktop hard drives. Desktop hard drives can sustain anywhere from 2 to 10 times the transfer speed of USB 2.0 flash drives but are equal to or slower than USB 3.0 and Firewire (IEEE 1394) for sequential data. USB 2.0 and faster flash drives have faster random access times: typically around 1 ms, compared to 12 ms for mainstream desktop hard drives.[18]

On laptop computers, the performance shifts more in favor of flash memory when laptop memory is more expensive than desktop memory; many laptops also have relatively slow 4200 rpm and 5400 rpm hard drives.

In the original release of Windows Vista, ReadyBoost failed to recognize its cache data upon resume from sleep, and restarted the caching process, making ReadyBoost ineffective on machines undergoing frequent sleep/wake cycles. This problem was fixed with Vista SP1.[19]

Limitations

[edit]

Since flash drives wear out after a finite (though very large) number of writes, ReadyBoost will eventually wear out the drive it uses. According to the Microsoft Windows Client Performance group, the drive should be able to operate for at least ten years.[3]

See also

[edit]

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

ReadyBoost

View on Grokipedia
from Grokipedia
ReadyBoost is a disk caching feature developed by for the Windows operating system that allows compatible removable flash storage devices, such as USB flash drives and Secure Digital (SD) cards, to serve as auxiliary memory caches, thereby enhancing system performance without requiring additional internal RAM upgrades. By storing frequently accessed data on the faster flash media, ReadyBoost reduces reliance on slower traditional hard disk drives (HDDs), speeding up application loading times and overall responsiveness, particularly on systems with limited RAM or older storage hardware. Introduced with in 2007 as a way to leverage emerging flash storage technologies, ReadyBoost was designed to bridge performance gaps in low-end PCs during an era when solid-state drives (SSDs) were not yet widespread. It carried over to subsequent versions, including , 8, and 10, where it continued to provide benefits for users with HDD-based systems and insufficient RAM. However, its utility diminished with the proliferation of SSDs and increased RAM capacities; as a result, the ReadyBoost management interface was removed in starting with version 22H2 in 2022, though pre-configured drives may still function. In operation, ReadyBoost creates a dedicated cache file (typically named ReadyBoost.sfcache) on the removable device, using algorithms to predict and store disk read data for quick retrieval, while writes are handled by the primary storage to ensure data integrity. Compatible devices must offer at least 500 MB of free space and support read speeds of at least 2.5 MB/s for 4 KB random reads and write speeds of at least 1.75 MB/s for 512 KB random writes, with optimal performance from flash drives of up to 32 GB per device (for a total of up to 256 GB across up to eight devices in Windows 7 and later), though limited to 4 GB in Windows Vista or on FAT32-formatted drives. The feature is automatically detected upon device insertion, prompting users to configure it via the drive's properties dialog, but it is disabled on SSD-equipped systems where caching provides negligible gains.

History and Development

Introduction in Windows Vista

ReadyBoost was introduced as a key performance-enhancing feature in , enabling the use of removable flash storage devices to improve overall system responsiveness. Developed by as part of the operating system's disk caching innovations (codenamed EMD), it allows users to leverage affordable USB flash drives, Secure Digital (SD) cards, and similar NAND flash-based media to extend caching capabilities beyond traditional hard disk drives (HDDs). This feature emerged during a period when HDDs remained the dominant storage medium but suffered from latency issues in operations, prompting to capitalize on the declining costs and widespread availability of flash memory in the mid-2000s. The core purpose of ReadyBoost is to supplement limited system RAM and accelerate disk (I/O) operations, particularly on low-memory configurations where paging to slower HDDs could hinder performance. By caching frequently accessed data—such as files for application launches and system —on faster flash storage, ReadyBoost reduces reliance on mechanical HDD seeks and reads, thereby enhancing efficiency without requiring internal hardware upgrades. Initial design goals focused on speeding up critical tasks like times, application loading, and general file access, with support for caching up to 4 GB of data per connected device to balance usability and effectiveness. ReadyBoost debuted with the release to manufacturing (RTM) of on November 8, 2006, marking its integration into the operating system's core architecture from launch. This timing aligned with broader efforts to modernize Windows for an era of evolving storage technologies, and the feature saw subsequent enhancements in later versions for broader compatibility, including support for in Service Pack 1.

Evolution Across Windows Versions

ReadyBoost, introduced as a foundational feature in , underwent iterative enhancements in subsequent versions to address limitations in cache capacity and device support while adapting to evolving hardware landscapes. In Windows 7, released in 2009, enhancements allowed for larger cache sizes up to 32 GB per device and a total of 256 GB across multiple devices (up to eight), expanding beyond the single-device limit of Vista. Windows 8, launched in 2012, retained ReadyBoost functionality. The feature was compatible with USB 3.0 interfaces for faster data transfer rates on supported hardware. By the release of in 2015, ReadyBoost continued to receive full support. The feature includes mechanisms to disable itself on systems with SSDs, where performance gains are negligible. ReadyBoost's utility declined with the adoption of SSDs and increased RAM in consumer PCs, rendering the caching less necessary. Active support persisted through until its end-of-life on October 14, 2025, after which no further updates were provided for the operating system.

Technical Functionality

Caching Mechanism

ReadyBoost utilizes a hybrid caching model that leverages flash storage in conjunction with the SuperFetch technology to enhance system performance. SuperFetch acts as a predictive prefetching service, identifying and caching frequently accessed data in RAM, while ReadyBoost extends this by using non-volatile for supplementary caching, particularly targeting small, random read operations akin to pagefile access. For patterns, the system falls back to the primary when flash cannot provide an advantage, ensuring optimal use of each storage medium's strengths. The data selection process relies on SuperFetch to monitor usage patterns and pinpoint "hot" files—those repeatedly accessed by applications and the operating system. These files, including system pages and application data, are then copied and compressed before being stored in a dedicated cache file named ReadyBoost.sfcache on the flash device, allowing for quicker retrieval than from the slower hard disk. This approach prioritizes performance-critical content based on historical access frequency, ensuring the cache remains relevant to ongoing workloads. Cache size allocation is designed to maximize usable space on the flash device while adhering to filesystem constraints and performance guidelines. ReadyBoost dedicates a significant portion of the device's capacity—typically up to the maximum supported limits—to the cache file, with capping it at 4 GB and later versions like extending to 32 GB per device. This allocation supports both read and write operations, with a recommended ratio of at least 2:1 relative to system RAM for effective operation, and compression enabling effective sizes up to twice the physical limit (e.g., 8 GB from 4 GB flash in Vista). The write-back policy in ReadyBoost temporarily directs small disk writes to the flash cache before committing them to the hard disk, minimizing latency for bursty I/O patterns. Writes are eligible for caching if they follow a recent read (within tens of minutes to hours), are 64 KB or smaller in size, and are not part of sequential operations, thereby leveraging flash's low-latency characteristics without excessive wear. All cached data remains a duplicate of disk content, ensuring even if the device is unexpectedly removed. Eviction from the ReadyBoost cache is managed through SuperFetch's adaptive mechanisms, which prioritize retaining high-value pages while removing less recently or infrequently used ones to accommodate new data under memory pressure. Compression plays a key role in eviction efficiency, achieving 2:1 to 3:1 ratios to store more pages without immediate removal, and the cache is encrypted with 128-bit AES to protect contents during management. This process maintains cache effectiveness by focusing on ongoing usage patterns rather than static rules.

Data Processing and Integration

ReadyBoost integrates with the Windows I/O manager through the rdyboost.sys filter driver, which operates as a kernel-mode component to intercept incoming disk requests and route cacheable operations—primarily random reads—to compatible flash storage devices. This interception occurs at the volume level, allowing ReadyBoost to evaluate requests in real time and prioritize those that benefit from flash access without disrupting the overall I/O flow. The driver works in conjunction with the SuperFetch service (sysmain.dll), which identifies and prefetches performance-critical data pages for caching, ensuring seamless incorporation into the storage stack. For read operations resulting in cache hits, ReadyBoost delivers data directly from the flash device, bypassing the (HDD) to reduce latency; this process leverages the inherent low-latency random access characteristics of NAND flash, providing faster response times compared to traditional HDD seeks. The system prioritizes these hits for small, frequently accessed files and pages, as determined by SuperFetch patterns, while allowing sequential or non-cacheable reads to proceed directly to the underlying disk. This direct delivery mechanism enhances overall system responsiveness during typical workloads, such as application launches, by minimizing I/O bottlenecks in the storage subsystem. To maintain data consistency between the flash cache and the primary HDD, ReadyBoost employs a process involving periodic flushes of modified cache contents back to the disk. These flushes are handled via background threads managed by the ReadyBoost service (Emdmgmt.dll), which operate opportunistically during low system activity to avoid impacting foreground tasks or causing user-perceptible stalls. The cache primarily stores copies of disk pages rather than original data, enabling safe removal of the flash device without risk of loss, though ongoing ensures the HDD remains the authoritative store. Error handling in ReadyBoost includes automatic fallback to the HDD for any read or write operations if the flash device fails or becomes unavailable, preventing system disruptions and ensuring continued access to data. In cases of flash media errors, the driver logs the issue and reverts I/O paths to the primary storage, while the cache file (typically named ReadyBoost.sfcache) can be rebuilt as needed by SuperFetch. ReadyBoost also accounts for flash device longevity by utilizing media with built-in wear-leveling, distributing write operations evenly to mitigate premature failure, though it does not implement custom wear-leveling algorithms itself. When multiple ReadyBoost-enabled devices are attached, the system coordinates them through a pooled caching approach, treating the collective flash storage as a unified cache space up to 256 GB across up to eight devices in supported versions like Windows 7. Load balancing is achieved dynamically by the rdyboost.sys driver and SuperFetch, which distribute cache misses and prefetches based on device response times and availability, optimizing throughput by directing operations to the fastest available flash media while falling back to the HDD as necessary. This multi-device support extends the effective cache capacity and improves reliability through .

System Requirements and Compatibility

Hardware Specifications

ReadyBoost requires compatible removable storage devices that can serve as a caching medium, primarily USB 2.0 or higher flash drives, SD cards, and cards used via adapters. These devices must support efficient operations to handle the caching workload effectively. The minimum hardware specifications for certification, established during the era, include a capacity of at least 500 MB of free storage, a sustained read speed of 2.5 MB/s for 4 KB random reads distributed across the device, and a sustained write speed of 1.75 MB/s for 512 kB random writes (1 MB blocks in and later). Devices falling short of these thresholds are deemed unsuitable by the system. These requirements ensure the flash storage can outperform traditional hard disk drives in scenarios. For optimal performance, configurations utilizing or faster interfaces are recommended to minimize interface-related bottlenecks, particularly when paired with NAND flash memory, which provides higher density and better suitability for caching compared to older NOR flash types. Such setups leverage the superior throughput of modern interfaces and flash architectures. Capacity constraints limit ReadyBoost to a maximum of 32 GB per device starting with , with a total system-wide limit of 256 GB across up to eight devices. These limits apply in supported Windows versions to balance . Upon insertion, Windows evaluates removable media for ReadyBoost compatibility by assessing random access performance against the minimum speed thresholds, automatically notifying users if the device meets the criteria. This detection process occurs in Windows Vista and subsequent versions that support the feature.

Software and OS Support

ReadyBoost is available in client editions of Windows Vista, including Business, Home Basic, Home Premium, and Ultimate. It is also supported in Windows 7 editions such as Home Basic, Home Premium, Professional, Starter, and Ultimate; Windows 8 and Windows 8.1 Home and Pro editions; and Windows 10 in Home and Pro editions. The feature is not supported in Windows Server editions from 2008 onward, Windows XP, or any pre-Vista versions of Windows. Additionally, ReadyBoost is absent in Windows 11 starting from version 22H2 released in 2022, where the management interface has been removed. To enable ReadyBoost, the must be formatted with the , , or FAT32 , and users require administrator privileges to access the initial setup through the Device Properties dialog in . No additional software installation is necessary, as the feature relies on the built-in RdyBoost. filter driver provided by the operating system. Full ReadyBoost functionality was available in supported Windows 10 versions until the operating system's end of support on October 14, 2025, after which no further updates or security patches will be provided. However, in later Windows 10 builds, the feature is often disabled by default, particularly on systems with solid-state drives where performance benefits are minimal.

Performance Characteristics

Benchmark Evaluations

Early evaluations of ReadyBoost in around 2007 demonstrated noticeable improvements in system responsiveness on low-memory configurations, with informal tests indicating up to 20-30% faster application launch times when using a 1 GB flash cache on systems equipped with 512 MB RAM. In benchmarks from 2009, ReadyBoost contributed to boot time reductions of up to 7% and improved application launch times, based on user reports, though specific I/O performance metrics like were not quantified in available assessments. Independent assessments between 2010 and 2015, such as those using PCMark Vantage on HDD-based systems, reported marginal overall gains of 1-2% in productivity suites, with up to 10-15% improvements in application startup times on setups with 2 GB or more RAM, while showing negligible or no benefits on PCs with SSD storage due to the latter's superior native speeds. Assessments as of 2013 confirmed minimal benefits, with boot times improving by up to 7% on low-RAM systems, highlighting ReadyBoost's utility for targeted disk operations on older hardware. As of 2025, no recent benchmarks indicate practical benefits, and Windows automatically disables the feature on SSD-equipped systems where flash caching offers no advantage over built-in storage performance.

Influencing Factors

The effectiveness of ReadyBoost is highly dependent on the amount of installed RAM in the system. It provides the most significant improvements on computers with less than 2 GB of RAM, where the workload often exceeds available , leading to frequent disk accesses that ReadyBoost can mitigate through flash caching. On systems with 2 GB or more, benefits diminish as SuperFetch, Windows' primary caching service, prioritizes RAM for frequently accessed data, reducing the need for external flash supplementation. Above 4 GB of RAM, ReadyBoost typically offers negligible gains, as ample physical handles most caching demands without relying on slower flash devices. ReadyBoost interacts differently with various storage configurations, particularly the primary drive type. It is most effective when paired with traditional hard disk drives (HDDs), where its low-latency flash cache accelerates access to small, frequently used files that would otherwise suffer from HDD seek times. However, on systems with solid-state drives (SSDs) as the primary storage, ReadyBoost becomes redundant, as SSDs' inherent speed in random reads outperforms USB flash, and Windows often disables SuperFetch (and thus ReadyBoost) to avoid unnecessary overhead. The nature of the workload plays a crucial role in determining ReadyBoost's impact. It excels in scenarios involving heavy random I/O operations, such as web browsing or running applications, where small, scattered file accesses benefit from the flash cache's quick response times compared to disk seeks. Conversely, workloads dominated by sequential I/O, like or large file transfers, see minimal improvements, as these patterns align better with native disk performance and do not leverage ReadyBoost's strengths in patterns. The quality and specifications of the flash device significantly influence ReadyBoost's outcomes. High-end USB flash drives or SD cards that exceed minimum performance thresholds—such as 2.5 MB/s for 4 KB random reads and 1.75 MB/s for 1 MB random writes—deliver substantial caching benefits by achieving a WinSAT assessment score above 6.5. In contrast, slower USB 2.0 devices that only marginally meet these criteria provide limited gains, often below 10% in responsive tasks, due to bottlenecks in transfer rates that undermine the caching efficiency. Proper configuration is essential to maximize ReadyBoost without inefficiencies. Microsoft recommends dedicating 4 GB to 32 GB of flash space per device for optimal caching, ideally sized at 1.5 to 3 times the system's RAM to balance coverage and overhead, with support for up to eight devices in and later. Using or formatting enables the full 32 GB limit per drive, while smaller allocations suffice for lighter workloads.

Limitations and Deprecation

Inherent Technical Constraints

ReadyBoost's caching mechanism imposes strict limits on the of the cache it can utilize on individual flash devices. In and later versions, the maximum cache is capped at 32 GB per removable storage device, with a total system-wide limit of 256 GB across up to eight such devices. The maximum cache is limited to 4 GB on devices formatted with FAT32 due to file restrictions; formatting with or is required for the full 32 GB. These constraints stem from the ReadyBoost cache being a single file and filesystem limitations, making it insufficient for caching large datasets required by modern applications that handle extensive temporary files or multimedia processing. A significant inherent limitation arises from the wear on NAND flash memory used in ReadyBoost-compatible devices. Flash storage has a finite number of write-erase cycles, typically ranging from 10,000 to 100,000 per cell depending on the NAND type, and ReadyBoost's frequent small writes for caching frequently accessed can accelerate this degradation compared to read-only usage. Although designs the caching algorithm to minimize writes and states that a typical device should operate for at least ten years under normal conditions, heavy usage patterns still reduce the overall lifespan relative to lighter applications. Operational overhead introduces additional constraints, particularly during initial setup and ongoing data handling. The setup process involves scanning the flash device and system usage patterns to initialize the cache, which can temporarily increase CPU utilization. Furthermore, ReadyBoost employs AES-128 and compression on cached data, achieving a typical 2:1 but adding computational load; disabling compression via settings is recommended for low-power or slow CPUs to reduce this overhead, as it can impact battery life on portable devices. Data consistency poses risks in scenarios involving sudden interruptions, such as power loss before the cache flushes to the primary disk. While the cache stores only copies of frequently accessed files and not critical system data—ensuring no permanent loss upon device removal or —unflushed changes could lead to temporary inconsistencies in application behavior until the system reverts to disk-based access. This is partially mitigated by the underlying journaling for the cache file, but the design relies on periodic flushes that may not occur instantaneously during abrupt shutdowns. Scalability is inherently limited by the architecture's support for multiple devices, capped at eight in and later, which can introduce I/O contention in multi-threaded environments. Beyond this, shared USB bus bandwidth and controller overhead may degrade performance under concurrent access from several caches, particularly in systems with high I/O demands, as the feature does not natively optimize for parallel threading across devices.

Removal and Modern Relevance

The ReadyBoost management interface was removed from starting with version 22H2, released in October 2022, making it unavailable for new configurations on this operating system, though pre-configured drives may still function. This removal stemmed from its diminished utility in contemporary computing environments dominated by solid-state drives (SSDs) and systems equipped with 8 GB or more of RAM, where ReadyBoost provided negligible performance gains. Microsoft's decision aligned with a broader transition toward more advanced, integrated caching technologies, such as those in Storage Spaces, which offer superior data resiliency and performance optimization without relying on external . Following the 2022 update, the ReadyBoost management interface remains absent in all subsequent versions, including 24H2 as of November 2025. In , while the feature persists for , its use is discouraged on modern configurations, as interactions with updated drivers and SSD-based systems can introduce overhead that degrades overall performance rather than enhancing it. As of November 2025, ReadyBoost holds no practical relevance for new system builds, where ubiquitous SSD and ample RAM capacities have rendered it obsolete. It retains only marginal niche applicability in scenarios like resource-constrained virtual machines or ultra-low-specification legacy hardware lacking sufficient internal storage or upgrades. Contemporary alternatives have largely supplanted ReadyBoost, including built-in RAM-based caching via the SysMain service (formerly SuperFetch), which dynamically manages frequently accessed data in memory. Additional options encompass SSD or eMMC extensions for tiered storage acceleration, as well as third-party solutions like PrimoCache, which enable configurable RAM and SSD caching layers for targeted performance boosts on HDD-dominant setups.

References

  1. https://support.microsoft.com/en-us/windows/tips-to-improve-pc-performance-in-windows-b3b3ef5b-5953-fb6a-2528-4bbed82fba96
  2. https://support.microsoft.com/en-us/topic/usb-and-sd-storage-media-readyboost-with-a-sd-card-or-a-flash-drive-f19ab915-5f8a-b131-e6d8-a6900154a42c
  3. https://learn.microsoft.com/en-us/answers/questions/82dbe539-e594-42b7-93bc-60f6af1e6c5e
  4. https://download.microsoft.com/download/3/0/2/3027d574-c433-412a-a8b6-5e0a75d5b237/perfaccel.docx
  5. https://learn.microsoft.com/en-us/answers/questions/4352422/no-readyboost-in-windows-11
  6. https://www.eetimes.com/optimize-flash-media-for-readyboost-in-windows-vista/
  7. https://www.networkcomputing.com/data-center-networking/readyboost-better-windows-vista-performance-in-a-flash
  8. https://www.eweek.com/storage/is-vista-heading-for-a-flash-nightmare/
  9. https://learn.microsoft.com/en-us/troubleshoot/windows-client/performance/speed-up-your-computer
  10. https://www.microsoft.com/en-us/windows/end-of-support
  11. https://learn.microsoft.com/en-us/archive/blogs/tomarcher/readyboost-qa
  12. https://learn.microsoft.com/en-us/answers/questions/415341/readyboost-what-data-is-cached
  13. https://download.microsoft.com/documents/uk/technet/downloads/technetmagazine/24_32_inwinkernel_desfin.pdf
  14. https://learn.microsoft.com/en-us/answers/questions/4045265/how-to-enable-readyboost
  15. https://learn.microsoft.com/en-us/answers/questions/2682585/readyboost-windows-7
  16. https://learn.microsoft.com/en-us/answers/questions/2735291/does-readyboost-effectively-expand-ram-on-an-older
  17. https://learn.microsoft.com/en-us/answers/questions/82dbe539-e594-42b7-93bc-60f6af1e6c5e/im-unable-to-enable-readyboost
  18. https://learn.microsoft.com/en-us/answers/questions/3276847/readyboost-drive-for-windows-10-pro-how-do-i-use-i
  19. https://learn.microsoft.com/en-us/answers/questions/3749367/regular-bsod-with-rdyboost-sys-driver-as-a-cause-o
  20. https://support.microsoft.com/en-us/windows/windows-10-support-has-ended-on-october-14-2025-2ca8b313-1946-43d3-b55c-2b95b107f281
  21. https://learn.microsoft.com/en-us/answers/questions/3944868/readyboost-not-working
  22. https://www.hanselman.com/blog/vista-and-readyboost
  23. https://superuser.com/questions/3227/does-windows-readyboost-have-a-meaningful-impact-on-performance
  24. https://www.digitalcitizen.life/does-readyboost-work-does-it-improve-performance-slower-pcs/
  25. https://learn.microsoft.com/en-us/answers/questions/4193781/does-readyboost-improve-performance
  26. https://www.tenforums.com/performance-maintenance/152849-ready-boost.html
  27. https://learn.microsoft.com/en-us/answers/questions/2437598/performance-increase-using-ssd-for-paging-fetch-ca
  28. https://learn.microsoft.com/en-us/answers/questions/2410499/readyboost-all-explained
  29. https://supportcommunity.zebra.com/s/article/Using-ReadyBoost-with-USB-and-SD-storage-cards?language=en_US
  30. https://askleo.com/flash-drive-wear-out/
  31. https://learn.microsoft.com/en-us/windows-hardware/customize/desktop/unattend/microsoft-windows-systemmaintenanceservice-cachelist-cache-enablecompression
  32. https://www.minitool.com/news/readyboost-tab-missing.html
  33. https://learn.microsoft.com/en-us/windows-server/storage/storage-spaces/cache
  34. https://www.elevenforum.com/t/readyboost-tab-missing.39396/
  35. https://www.makeuseof.com/some-people-still-trying-pointless-windows-application/
  36. https://www.ninjaone.com/blog/how-to-add-or-remove-readyboost-in-windows/
  37. https://windowsreport.com/readyboost-alternative/
Add your contribution
Related Hubs
User Avatar
No comments yet.