Hubbry Logo
search
logo
Springfield model 1871 avatar
Springfield model 1871
Springfield model 1871
current hub
1737270

Springfield model 1871

logo
Community Hub0 Subscribers
Read side by side
Springfield model 1871
View on Wikipedia
from Wikipedia

The Springfield model 1871 rolling-block U.S. Army rifle was manufactured in 1871–72 by Springfield Armory, using the design originated by Remington Arms Company, under a royalty agreement.[1]

Key Information

Origin

[edit]

During the U.S. Civil War, Joseph Rider experimented with several breech loading weapon designs. In 1865, he was issued the first patent for what would evolve into the Remington rolling block action.[2] The Remingtons continued to invest in Rider's work, and met with Ordnance Department officials in the hope of interesting them in this new design. The U.S. Navy Ordnance Department became interested in the design, and purchased several different models of rifles from 1867 through 1869. Field trials of these various rifles yielded mostly positive results.[3][4]

In 1869, the Navy Bureau of Ordnance tested many different weapons, and settled on the .50 caliber Remington Rolling Block for use by both the U.S. Navy and the U.S. Marines. An order was placed for 10,000 model 1870 rifles. After the rifles were produced, Navy inspectors realized that the rear sights had been positioned incorrectly, and were dangerously close to the chamber, making the weapon unsafe for use. All 10,000 rifles were rejected, and were subsequently sold to France for use in the Franco-Prussian War. The sale of the defective rifles enabled enough funds to be recovered that the Navy Ordnance Department ordered an additional 12,000 rifles.[5]

Production

[edit]

Following the success of the model 1870, the Governor of New York ordered 15,000 Remington rolling block rifles and bayonets for his state's militia. These model 1871 rifles were very similar to the model 1870 rifles, but differed in some details. Field experience with the model 1870 showed that the mechanism jammed too easily in dusty conditions. Users also did not like loading the weapon at full cock. The model 1871 included a locking bolt in the breech mechanism. The user pulled the hammer to the full cock position, retracted the breech block spur to expose the chamber, and inserted the cartridge. When the breech block closed, the hammer automatically fell to the half cock position, and the weapon could not be fired until the hammer was once again pulled to the full cock position.[6]

Over 20,000 model 1871 rifles were eventually purchased by the state of New York. The U.S. Army did not greet the Remingtons with much enthusiasm, despite its superiority to the standard-issue Springfield model 1870. Foreign sales of the weapon were much more successful. Denmark ordered many of the model 1870 and 1871 rifles. In 1873, Spain ordered 50,000 model 1871 rifles, which were delivered in 1875. Numerous other countries, such as France, Chile, Argentina, Cuba, Greece, and Puerto Rico also purchased this rifle.[7]

See also

[edit]

Notes

[edit]

References

[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Springfield model 1871

View on Grokipedia
from Grokipedia
The Springfield Model 1871 was a single-shot, breech-loading rolling-block rifle chambered in the .50-70 Government cartridge, manufactured by the Springfield Armory for the U.S. Army as a transitional service arm following the Civil War.[1] Featuring a 36-inch barrel secured by two bands, an overall length of approximately 52 inches, and a weight of about 9 pounds, it utilized a simple rolling-block action with a half-cock safety mechanism and was designed for reliability in frontier conditions.[2][1] Developed under a royalty agreement with Remington Arms Company, the Model 1871 built on successful field trials of the earlier Model 1870, which involved 1,008 rifles and 313 carbines tested by the U.S. military.[1] In 1872, the Army placed an order for 10,001 rifles, all produced at Springfield Armory between 1871 and 1872, with no carbine variants adopted for this model.[1] The rifle's design included distinctive features such as a double-shouldered cleaning rod flush with the muzzle, a rear sling swivel on the trigger guard, and markings like "Eagle/US/Springfield/1872" on the receiver, along with an "ESA" inspector's cartouche on the stock.[1] It was compatible with an angular-bladed socket bayonet and finished in "National Army Bright" for durability.[1][2] Primarily employed during the Indian Wars on the Western frontier for both combat and hunting, the Model 1871 saw limited but notable service due to its accuracy and robustness before being largely supplanted by the more versatile Springfield Model 1873 trapdoor rifle.[3] Its production marked one of the last efforts by Springfield Armory to utilize external designs under license, reflecting the U.S. military's shift toward metallic-cartridge firearms in the post-Civil War era.[1]

Development

Origins

The rolling-block mechanism central to the Springfield Model 1871 originated from innovations in breechloading firearm design during the post-Civil War era. In 1865, Joseph Rider, a gunsmith at the Remington Arms Company, received U.S. Patent No. 45,797 for improvements in breech-loading firearms, which refined an earlier 1863 patent by Leonard Geiger and introduced a robust rolling breechblock that locked securely upon firing while allowing efficient reloading.[4] This design evolved rapidly into a versatile breechloading system suitable for metallic cartridges, addressing the limitations of muzzleloaders and early conversion rifles by providing greater reliability and speed in operation.[1] The U.S. Navy played a key role in evaluating early prototypes of the rolling-block action from 1867 to 1869, conducting extensive trials to select a modern breechloader for naval service. On March 24, 1869, Rear Admiral John A. Dahlgren convened a Board of Officers to test various systems, including those by Allin, Berdan, and Sharps, ultimately recommending the Remington rolling-block design on August 2, 1869, for its simplicity and performance with centerfire cartridges.[5] These evaluations included the Remington Model 1867 carbine, a .50-45 caliber arm with a 23-inch barrel, of which 5,000 were delivered to the Navy between 1868 and 1869, marking the first significant military adoption of the mechanism.[1] Building on these trials, the Navy Bureau of Ordnance contracted Springfield Armory in 1870 to produce 10,000 rolling-block rifles under license from Remington, designated as the Model 1870. However, upon inspection, the initial batch was rejected due to the rear sight being positioned too close to the breech—only ½ inch forward of the receiver instead of the intended 3⅛ inches—posing a safety risk from gas escape during firing.[5] The rejected rifles were sold to the Baltimore firm of Poultney & Trimble, who exported them to France, where they arrived too late for the Franco-Prussian War but provided funds to rectify the issue.[5] In response, the Navy ordered 12,000 corrected Model 1870 rifles later that year, with the sight repositioned forward, paving the way for further refinements in the Army's subsequent Model 1871.[5]

Adoption by the U.S. Military

Following the American Civil War, the U.S. military faced the urgent need to modernize its small arms inventory, transitioning from outdated muzzleloaders and surplus percussion weapons to reliable breechloading rifles chambered for metallic cartridges to meet the demands of frontier defense and potential conflicts. In this context, the U.S. Army initiated trials in 1871 with 1,008 Model 1870 rolling-block rifles produced at Springfield Armory, evaluating their suitability as a single-shot alternative to ongoing trapdoor conversion experiments. These trials yielded favorable results, prompting the Army to formally adopt the improved design as the Model 1871 in 1872, with a contract for 10,001 rifles chambered in .50-70 Government, all manufactured without carbine variants.[1] Springfield Armory played a pivotal role in adapting the Remington rolling-block mechanism for Army service, producing the rifles under a royalty agreement with E. Remington & Sons while incorporating enhancements such as a half-cock safety feature to prevent accidental discharge, which addressed concerns from earlier iterations. This marked a shift from the Navy's earlier focus on the Model 1870, a similar but distinct contract of approximately 12,000 accepted rifles from an initial 22,000 produced between 1870 and 1871, allowing the Army to leverage the proven design for its own procurement needs without direct reliance on private manufacturers.[1][3] The adoption extended to state-level forces, with New York ordering 15,000 Model 1871 rifles in 1871 specifically for its militia, further validating the design's domestic utility and expanding production at Springfield Armory under the same licensing arrangement. By 1872, total U.S. purchases of rolling-block rifles, encompassing the Army's 10,001 units, Navy expansions from the Model 1870 series, trial quantities, and the New York militia contract, exceeded 20,000 units, solidifying the platform's role in post-war rearmament efforts.[1]

Design

Mechanism

The Springfield Model 1871 features a rolling-block breechloading action, in which a cylindrical breechblock pivots on a vertical axis behind the chamber to facilitate loading and sealing. When closed, the breechblock rolls into position to form a gas-tight seal around the .50-70 Government cartridge, with the hammer engaging its rear surface to lock it securely against pressure from firing.[3] To open the action, the hammer is manually cocked rearward to disengage the locking surfaces, permitting the breechblock to be rotated sideways and downward via an integral spur, exposing the chamber for cartridge insertion or extraction of the spent case. A key enhancement in the Model 1871 is the addition of a dedicated locking bolt in the breech mechanism, which provides supplemental security by engaging mating surfaces on the breechblock and frame when closed. This bolt improves breech rigidity and minimizes the risk of inadvertent opening or gas leakage under high pressure. The hammer mechanism incorporates a safety feature where, upon closure of the breechblock, it automatically drops to the half-cock position, preventing accidental discharge and requiring the user to manually retract it to full cock before the trigger can release it to strike the firing pin. Compared to the preceding Model 1870, which lacked this locking bolt and relied solely on hammer-block engagement, the Model 1871's design addresses vulnerabilities to jamming in dusty or fouled conditions by offering tighter tolerances and more robust retention of the breechblock. These refinements enhance overall reliability in field use, making the action less susceptible to environmental debris interfering with operation.[6]

Specifications

The Springfield Model 1871 was a single-shot, breechloading rifle utilizing a rolling block action, chambered in .50-70 Government cartridge with a .50-inch caliber.[7] The rifle featured a steel barrel and receiver, paired with a walnut stock for durability and handling in military applications.[7] Its sights included a fixed front blade and an adjustable rear leaf sight, graduated up to 900 yards.[7] Key technical specifications of the standard U.S. Army Model 1871 are summarized below:
SpecificationDetails
Caliber.50 inches
Cartridge.50-70 Government
Barrel Length36 inches
Overall Length52 inches
WeightApproximately 9 pounds
Action TypeSingle-shot, breechloading rolling block
MaterialsSteel (barrel and receiver), walnut (stock)
SightsBlade front, adjustable folding leaf rear (graduated to 900 yards)
Rate of FireDependent on manual reloading
The design emphasized reliability through its simple rolling block mechanism, where the breechblock rolls to expose the chamber for loading, secured by a locking bolt.[7] Production adhered to these dimensions to ensure uniformity across the limited run of approximately 10,000 units.[8]

Production

U.S. Production

The Springfield Model 1871 rolling-block rifle was manufactured exclusively at the Springfield Armory in Massachusetts from 1871 to 1872.[2] This production run focused on fulfilling U.S. Army requirements, yielding a total of 10,000 units chambered in .50-70 Government.[2] These rifles featured 36-inch barrels often sourced from surplus U.S. Model 1861 and 1863 rifle-muskets, finished in "National Army Bright" with casehardened actions and hammers for durability in military service.[2] In parallel, Springfield Armory expanded its Rolling Block output to meet U.S. Navy demands through contracts initially tied to the Model 1870 design, producing an additional 12,000 improved rifles after the rejection of the first 10,000 units due to manufacturing flaws.[5] Overall, this brought the armory's total Rolling Block production for U.S. naval use to approximately 22,000 rifles between 1870 and 1871.[5] Manufacturing at Springfield Armory relied on a royalty agreement with E. Remington & Sons, incorporating the patented rolling-block mechanism originated by Remington while adapting it with armory-specific tooling to align with U.S. Army standards for bayonet compatibility and overall ruggedness.[3] This process involved mating Remington-derived actions to domestically produced components, ensuring interchangeability and compliance with federal specifications.[2] During production, Springfield Armory addressed quality control challenges drawn from lessons in the Model 1870 Navy rifles, particularly repositioning the rear sight forward from the receiver to correct alignment issues that had caused the initial 10,000-unit rejection by the Navy due to insufficient distance from the breech.[5] These refinements enhanced accuracy and reliability, allowing the Model 1871 to meet exacting military inspections without similar setbacks.[3]

Variants and Foreign Contracts

The Springfield Model 1871 incorporated enhancements to the breech mechanism over the preceding Model 1870, featuring improved locking lugs on the hammer for better security and a safety interlock that required recocking the hammer after the breech block was closed and before firing could occur. This design change addressed concerns with accidental discharge in earlier rolling blocks and was the first such implementation in a U.S. military contract rifle. No dedicated cadet or militia variants with shorter barrels were produced specifically for the Model 1871, though the overall rolling block action proved adaptable for training arms in other applications. The rolling block design underpinning the Springfield Model 1871 achieved far greater success in foreign markets through licensing and direct contracts with Remington, leading to widespread international production exceeding one million units across multiple nations by non-Springfield manufacturers. Caliber adaptations were common for foreign buyers, often shifting from the U.S. .50-70 Government to metric equivalents like the 11.15×58mmR (.43 Spanish), which provided comparable ballistics in a slightly smaller package suitable for European and Latin American militaries. Denmark secured one of the earliest major foreign contracts, ordering 40,537 rifles and 1,800 carbines from Remington between 1867 and 1870 in 11.35×51mmR, followed by domestic production of approximately 31,551 additional rifles at the Copenhagen arsenal through 1888. Spain licensed the design in 1868 after initial imports, manufacturing over 350,000 rifles and carbines at the Oviedo factory from 1871 to 1893, primarily in .43 Spanish; these included infantry, cavalry, and short rifle variants, with many later converted to the Reformado chambering in 1889. France received diverted shipments from Remington's Egyptian contract during the 1870–1871 Franco-Prussian War, supplementing domestic needs with rolling block rifles in .43 Spanish. Argentina contracted for an estimated 50,000 rifles and carbines in .43 Spanish around 1879, while similar sales occurred to Chile for military use before their adoption of Mauser rifles. Cuba, Greece, and Puerto Rico acquired quantities, often through Spanish surplus or direct purchases, with the design serving colonial and national forces into the early 20th century.

Operational Use

U.S. Service

The Springfield Model 1871 rolling-block rifle served as a transitional arm for the U.S. Army in the post-Civil War era, equipping infantry units during the 1870s for regular service and frontier duties. Adopted briefly as one of the first centerfire cartridge rifles for the military, it was issued to select regular Army regiments following successful field trials that demonstrated its basic functionality. However, its limited production of approximately 10,000 units restricted widespread distribution, with allocations primarily to experimental units rather than full-scale combat formations.[1][2] In operational contexts, the Model 1871 saw minimal combat exposure during the Indian Wars, largely due to its short service life and the rapid shift to newer designs. Field evaluations highlighted its accuracy and strength in controlled settings, with a misfire rate of 1.96% in 1871 trials—lower than competitors like the Ward-Burton (2.4%) and Remington (2.9%)—contributing to its selection despite some reliability concerns in dusty conditions. By 1873, the Model 1871 was largely supplanted by the Trapdoor Springfield, which offered superior durability for frontier campaigns.[9][2] Beyond frontline roles, the Model 1871 found significant application in training and militia programs. It was employed for drills and instruction in state national guard units, where its simple rolling-block mechanism facilitated marksmanship practice.[1]

International Use

While the Springfield Model 1871 was produced in limited quantities primarily for U.S. military use, related rolling-block rifles manufactured at Springfield Armory saw limited international adoption. In the aftermath of the Franco-Prussian War (1870–1871), France purchased around 10,000 Model 1870 rolling-block rifles (built at Springfield but rejected by the U.S. Navy) to bolster its depleted stocks, with surplus units later redistributed or sold abroad.[7] The broader Remington rolling-block design, on which the Springfield Model 1871 was based, saw extensive export contracts to numerous nations, including Spain, Denmark, Chile, Argentina, Cuba, and Greece. These rifles, often adapted to local calibers, were used in colonial conflicts, border disputes, and training roles into the early 20th century. For example, Remington rifles equipped Spanish forces in the Philippines and Cuba during the 1890s and the Spanish-American War, and appeared in South American conflicts like the War of the Pacific (1879–1884). The design's legacy is symbolized in Guatemala's coat of arms by crossed Remington rifles, representing arms adopted during the 1871 Liberal Revolution.[10][11][12] Abroad, the rifle was frequently adapted to local calibers like .43 Spanish or 11mm Mauser derivatives, enhancing compatibility with regional ammunition supplies. Reports highlighted its durability in tropical environments, such as Spanish colonies, where the sturdy construction withstood humidity and rough handling better than more complex breechloaders. However, black-powder fouling posed maintenance challenges, requiring frequent cleaning to prevent reliability issues in extended campaigns.[13][14]
User Avatar
No comments yet.