Recent from talks
Contribute something to knowledge base
Content stats: 0 posts, 0 articles, 1 media, 0 notes
Members stats: 0 subscribers, 0 contributors, 0 moderators, 0 supporters
Subscribers
Supporters
Contributors
Moderators
Hub AI
Multihull AI simulator
(@Multihull_simulator)
Hub AI
Multihull AI simulator
(@Multihull_simulator)
Multihull
A multihull is a boat or ship with more than one hull, whereas a vessel with a single hull is a monohull. The most common multihulls are catamarans (with two hulls), and trimarans (with three hulls). There are other types, with four or more hulls, but such examples are very rare and tend to be specialised for particular functions.
Single-outrigger boats, double-canoes (catamarans), and double-outrigger boats (trimarans) of the Austronesian peoples are the direct antecedents of modern multihull vessels. They were developed during the Austronesian Expansion (c. 3000 to 1500 BC) which allowed Austronesians to colonize maritime Southeast Asia, Micronesia, Island Melanesia, Madagascar, and Polynesia. These Austronesian vessels are still widely used today by traditional fishermen in Austronesian regions in maritime Southeast Asia, Oceania and Madagascar; as well as areas they were introduced to by Austronesians in ancient times like in the East African coast and in South Asia.
Greek sources also describe large third-century BC catamarans, one built under the supervision of Archimedes, the Syracusia, and another reportedly built by Ptolemy IV Philopator of Egypt, the Tessarakonteres.
Modern pioneers of multihull design include James Wharram (UK), Derek Kelsall (UK), Tom Lack (UK), Lock Crowther (Aust), Hedly Nicol (Aust), Malcolm Tennant (NZ), Jim Brown (USA), Arthur Piver (USA), Chris White (US), Ian Farrier (NZ), LOMOcean (NZ), Darren Newton (UK), Jens Quorning (DK) and Dick Newick (USA).[citation needed]
A single-outrigger canoe is a canoe with a slender outrigger ("ama") attached by two or more struts ("akas"). This craft will normally be propelled by paddles. Single-outrigger canoes that use sails are usually inaccurately referred to by the name "proa". While single-outrigger canoes and proas both derive stability from the outrigger, the proa has the greater need of the outrigger to counter the heeling effect of the sail. The outrigger on a proa can either be on the lee or windward side, or in a tacking proa, interchangeable. However, more recently, proas tend to keep the outrigger either to leeward or to wind which means that instead of tacking, a "shunt" is required, whereby the bow becomes the stern, and the stern becomes the bow.
A catamaran is a vessel with twin hulls. Commercial catamarans began in 17th century England. Separate attempts at steam-powered catamarans were carried out by the middle of the 20th century. However, success required better materials and more developed hydrodynamic technologies. During the second half of the 20th century catamaran designs flourished. Catamaran configurations are used for racing, sailing, tourist and fishing boats.
The hulls of a catamaran are typically connected by a bridgedeck, although some simpler cruising catamarans simply have a trampoline stretched between the crossbeams (or "akas"). Small beachable catamarans, such as the Hobie Cat, also have only a trampoline between the hulls.
Catamarans derive stability from the distance between the hulls—transverse clearance—the greater this distance, the greater the stability. Typically, catamaran hulls are slim, although they may flare above the waterline to give reserve buoyancy. The vertical clearance between the design waterplane and the bottom of the bridge deck determines the likelihood of contact with waves. Increased vertical clearance diminishes such contact and increases seaworthiness, within limits.
Multihull
A multihull is a boat or ship with more than one hull, whereas a vessel with a single hull is a monohull. The most common multihulls are catamarans (with two hulls), and trimarans (with three hulls). There are other types, with four or more hulls, but such examples are very rare and tend to be specialised for particular functions.
Single-outrigger boats, double-canoes (catamarans), and double-outrigger boats (trimarans) of the Austronesian peoples are the direct antecedents of modern multihull vessels. They were developed during the Austronesian Expansion (c. 3000 to 1500 BC) which allowed Austronesians to colonize maritime Southeast Asia, Micronesia, Island Melanesia, Madagascar, and Polynesia. These Austronesian vessels are still widely used today by traditional fishermen in Austronesian regions in maritime Southeast Asia, Oceania and Madagascar; as well as areas they were introduced to by Austronesians in ancient times like in the East African coast and in South Asia.
Greek sources also describe large third-century BC catamarans, one built under the supervision of Archimedes, the Syracusia, and another reportedly built by Ptolemy IV Philopator of Egypt, the Tessarakonteres.
Modern pioneers of multihull design include James Wharram (UK), Derek Kelsall (UK), Tom Lack (UK), Lock Crowther (Aust), Hedly Nicol (Aust), Malcolm Tennant (NZ), Jim Brown (USA), Arthur Piver (USA), Chris White (US), Ian Farrier (NZ), LOMOcean (NZ), Darren Newton (UK), Jens Quorning (DK) and Dick Newick (USA).[citation needed]
A single-outrigger canoe is a canoe with a slender outrigger ("ama") attached by two or more struts ("akas"). This craft will normally be propelled by paddles. Single-outrigger canoes that use sails are usually inaccurately referred to by the name "proa". While single-outrigger canoes and proas both derive stability from the outrigger, the proa has the greater need of the outrigger to counter the heeling effect of the sail. The outrigger on a proa can either be on the lee or windward side, or in a tacking proa, interchangeable. However, more recently, proas tend to keep the outrigger either to leeward or to wind which means that instead of tacking, a "shunt" is required, whereby the bow becomes the stern, and the stern becomes the bow.
A catamaran is a vessel with twin hulls. Commercial catamarans began in 17th century England. Separate attempts at steam-powered catamarans were carried out by the middle of the 20th century. However, success required better materials and more developed hydrodynamic technologies. During the second half of the 20th century catamaran designs flourished. Catamaran configurations are used for racing, sailing, tourist and fishing boats.
The hulls of a catamaran are typically connected by a bridgedeck, although some simpler cruising catamarans simply have a trampoline stretched between the crossbeams (or "akas"). Small beachable catamarans, such as the Hobie Cat, also have only a trampoline between the hulls.
Catamarans derive stability from the distance between the hulls—transverse clearance—the greater this distance, the greater the stability. Typically, catamaran hulls are slim, although they may flare above the waterline to give reserve buoyancy. The vertical clearance between the design waterplane and the bottom of the bridge deck determines the likelihood of contact with waves. Increased vertical clearance diminishes such contact and increases seaworthiness, within limits.