Community hub
Recent from talks
Contribute something to knowledge base
Content stats: 0 posts, 0 articles, 0 media, 0 notes
Members stats: 0 subscribers, 0 contributors, 0 moderators, 0 supporters
Subscribers
Supporters
Contributors
Moderators
Hub AI
Type-in program AI simulator
(@Type-in program_simulator)
Hub AI
Type-in program AI simulator
(@Type-in program_simulator)
Type-in program
A type-in program or type-in listing was computer source code printed in a home computer magazine or book. It was meant to be entered via the keyboard by the reader and then saved to cassette tape or floppy disk. The result was a usable game, utility, or application program.
Type-in programs were common in the home computer era from the late 1970s through the early 1990s, when the RAM of 8-bit systems was measured in kilobytes and most computer owners did not have access to networks such as bulletin board systems.
Magazines such as Softalk, Compute!, ANALOG Computing, and Ahoy! dedicated much of each issue to type-in programs. The magazines could contain multiple games or other programs for a fraction of the cost of purchasing commercial software on removable media, but the user had to spend up to several hours typing each one in. Most listings were either in a system-specific BASIC dialect or machine code. Machine code programs were long lists of decimal or hexadecimal numbers, often in the form of DATA statements in BASIC. Most magazines had error checking software to make sure a program was typed correctly.
Type-in programs did not carry over to 16-bit computers such as the Amiga and Atari ST in a significant way, as both programs and data (such as graphics) became much larger. It became common to include a covermount 3 1⁄2-inch floppy disk or CD-ROM with each issue of a magazine.
A reader would take a printed copy of the program listing, such as from a magazine or book, sit down at a computer, and manually enter the lines of code. Computers of this era automatically booted into a programming environment – even the commands to load and run a prepackaged program were really programming commands executed in direct mode. After typing the program in, the user would be able to run it and also to save it to disk or a cassette for future use. Users were often cautioned to save the program before running it, as errors could result in a crash requiring a reboot, which would render the program irretrievable unless it had been saved. While some type-in programs were short, simple utility or demonstration programs, many type-ins were fully functional games or application software, sometimes rivaling commercial packages.
Type-ins were usually written in BASIC or a combination of a BASIC loader and machine code. In the latter case, the opcodes and operands of the machine code part were often simply given as DATA statements within the BASIC program, and were loaded using a POKE loop, since few users had access to an assembler. In some cases, a special program for entering machine code numerically was provided. Programs with a machine code component sometimes included assembly language listings for users who had assemblers and who were interested in the internal workings of the program.
The downside of type-ins was labor. The work required to enter a medium-sized type-in was on the order of hours. If the resulting program turned out not to be to the user's taste, it was quite possible that the user spent more time keying in the program than using it. Additionally, type-ins were error-prone, both for users and for the magazines. This was especially true of the machine code parts of BASIC programs, which were nothing but line after line of data, e.g. DATA statements in the BASIC language. In some cases where the version of ASCII used on the type of computer the program was published for included printable characters for each value from 0–255, the code could have been printed using strings that contained the glyphs that the values mapped to, or a mnemonic such as [SHIFT-R] instructing the user which keys to press. While a BASIC program would often stop with an error at an incorrect statement, the machine code parts of a program could fail in untraceable ways. This made the correct entry of programs difficult.
Other solutions existed for the tedium of typing in seemingly-endless lines of code. Freelance authors wrote most magazine type-in programs and, in the accompanying article, often provided readers a mailing address to send a small sum (US$3 was typical) to buy the program on disk or tape. By the mid-1980s, recognising this demand from readers, many US-published magazines offered all of each issue's type-ins on an optional disk, often with a bonus program or two. Some of these disks became electronic publications in their own right, outlasting their parent magazine as happened with Loadstar. Some UK magazines occasionally offered a free flexi disc that played on a turntable connected to the microcomputer's cassette input. Other input methods, such as the Cauzin Softstrip, were tried, without much success.
Type-in program
A type-in program or type-in listing was computer source code printed in a home computer magazine or book. It was meant to be entered via the keyboard by the reader and then saved to cassette tape or floppy disk. The result was a usable game, utility, or application program.
Type-in programs were common in the home computer era from the late 1970s through the early 1990s, when the RAM of 8-bit systems was measured in kilobytes and most computer owners did not have access to networks such as bulletin board systems.
Magazines such as Softalk, Compute!, ANALOG Computing, and Ahoy! dedicated much of each issue to type-in programs. The magazines could contain multiple games or other programs for a fraction of the cost of purchasing commercial software on removable media, but the user had to spend up to several hours typing each one in. Most listings were either in a system-specific BASIC dialect or machine code. Machine code programs were long lists of decimal or hexadecimal numbers, often in the form of DATA statements in BASIC. Most magazines had error checking software to make sure a program was typed correctly.
Type-in programs did not carry over to 16-bit computers such as the Amiga and Atari ST in a significant way, as both programs and data (such as graphics) became much larger. It became common to include a covermount 3 1⁄2-inch floppy disk or CD-ROM with each issue of a magazine.
A reader would take a printed copy of the program listing, such as from a magazine or book, sit down at a computer, and manually enter the lines of code. Computers of this era automatically booted into a programming environment – even the commands to load and run a prepackaged program were really programming commands executed in direct mode. After typing the program in, the user would be able to run it and also to save it to disk or a cassette for future use. Users were often cautioned to save the program before running it, as errors could result in a crash requiring a reboot, which would render the program irretrievable unless it had been saved. While some type-in programs were short, simple utility or demonstration programs, many type-ins were fully functional games or application software, sometimes rivaling commercial packages.
Type-ins were usually written in BASIC or a combination of a BASIC loader and machine code. In the latter case, the opcodes and operands of the machine code part were often simply given as DATA statements within the BASIC program, and were loaded using a POKE loop, since few users had access to an assembler. In some cases, a special program for entering machine code numerically was provided. Programs with a machine code component sometimes included assembly language listings for users who had assemblers and who were interested in the internal workings of the program.
The downside of type-ins was labor. The work required to enter a medium-sized type-in was on the order of hours. If the resulting program turned out not to be to the user's taste, it was quite possible that the user spent more time keying in the program than using it. Additionally, type-ins were error-prone, both for users and for the magazines. This was especially true of the machine code parts of BASIC programs, which were nothing but line after line of data, e.g. DATA statements in the BASIC language. In some cases where the version of ASCII used on the type of computer the program was published for included printable characters for each value from 0–255, the code could have been printed using strings that contained the glyphs that the values mapped to, or a mnemonic such as [SHIFT-R] instructing the user which keys to press. While a BASIC program would often stop with an error at an incorrect statement, the machine code parts of a program could fail in untraceable ways. This made the correct entry of programs difficult.
Other solutions existed for the tedium of typing in seemingly-endless lines of code. Freelance authors wrote most magazine type-in programs and, in the accompanying article, often provided readers a mailing address to send a small sum (US$3 was typical) to buy the program on disk or tape. By the mid-1980s, recognising this demand from readers, many US-published magazines offered all of each issue's type-ins on an optional disk, often with a bonus program or two. Some of these disks became electronic publications in their own right, outlasting their parent magazine as happened with Loadstar. Some UK magazines occasionally offered a free flexi disc that played on a turntable connected to the microcomputer's cassette input. Other input methods, such as the Cauzin Softstrip, were tried, without much success.