Hubbry Logo
YAFFSYAFFSMain
Open search
YAFFS
Community hub
YAFFS
logo
7 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
YAFFS
YAFFS
YAFFS
View on Wikipedia
from Wikipedia
YAFFS
Developer(s)Charles Manning
Full nameYet Another Flash File System
Other
Supported
operating systems		Android, Firefox OS, Linux, Windows CE, pSOS, RTEMS, eCos, ThreadX, LCOS

YAFFS (Yet Another Flash File System) is a file system designed and written by Charles Manning for the company Aleph One.

YAFFS1 was the first version of this file system and was designed for the then-current NAND chips with 512 byte page size (+ 16 byte spare (OOB; Out-Of-Band) area). Work started in 2002, and it was first released later that year. The initial work was sponsored by Toby Churchill Ltd, and Brightstar Engineering.

These older chips also generally allow 2 or 3 write cycles per page.[1] YAFFS takes advantage of this: dirty pages are marked by writing to a specific spare area byte. Newer NAND flash chips have larger pages, first 2K pages (+ 64 bytes OOB), later 4K, with stricter write requirements. Each page within an erase block (128 kilobytes) must be written to in sequential order, and each page must be written only once.[citation needed]

Designing a storage system that enforces a "write once rule" ("write once property") has several advantages.[2]

YAFFS2 was designed to accommodate these newer chips. It was based on the YAFFS1 source code, with the major difference being that internal structures are not fixed to assume 512 byte sizing, and a block sequence number is placed on each written page. In this way older pages can be logically overwritten without violating the "write once" rule. It was released in late 2003.

YAFFS is a robust log-structured file system that holds data integrity as a high priority. A secondary YAFFS goal is high performance. YAFFS will typically outperform most alternatives.[3] It is also designed to be portable and has been used on Linux, WinCE, pSOS, RTEMS, eCos, ThreadX, and various special-purpose OSes. A variant 'YAFFS/Direct' is used in situations where there is no OS, embedded OSes or bootloaders: it has the same core filesystem but simpler interfacing to both the higher and lower level code and the NAND flash hardware.

The YAFFS codebase is licensed both under the GPL and under per-product licenses available from Aleph One.

YAFFS is locked on a per-partition basis at a high level, allowing only one thread to write at any given time.[4]

YAFFS1

[edit]

There is no special procedure to initialize a YAFFS filesystem beyond simply erasing the flash memory. When a bad block is encountered, YAFFS follows the smart media scheme of marking the fifth byte of the block's spare area. Blocks marked as such remain unallocated from then on.[clarification needed]

To write file data, YAFFS initially writes a whole page (chunk in YAFFS terminology) that describes the file metadata, such as timestamps, name, path, etc. The new file is assigned a unique object ID number; every data chunk within the file will contain this unique object ID within the spare area. YAFFS maintains a tree structure in RAM of the physical location of these chunks. When a chunk is no longer valid (the file is deleted, or parts of the file are overwritten), YAFFS marks a particular byte in the spare area of the chunk as 'dirty'. When an entire block (32 pages) is marked as dirty, YAFFS can erase the block and reclaim the space. When the filesystem's free space is low, YAFFS consolidates a group of good pages onto a new block. YAFFS then reclaims the space used by dirty pages within each of the original blocks.

When a YAFFS system mounts a NAND flash device, it must visit each block to check for valid data by scanning its spare area. With this information it then reconstitutes the memory-resident tree data structure.

YAFFS2

[edit]

YAFFS2 is similar in concept to YAFFS1, and shares much of the same code; the YAFFS2 code base supports YAFFS1 data formats through backward compatibility. The main difference is that YAFFS2 needs to jump through significant hoops to meet the "write once" requirement of modern NAND flash.[5]

YAFFS2 marks every newly written block with a sequence number that is monotonically increasing. The sequence of the chunks can be inferred from the block sequence number and the chunk offset within the block. Thereby when YAFFS2 scans the flash and detects multiple chunks that have identical ObjectIDs and ChunkNumbers, it can choose which to use by taking the greatest sequence number. For efficiency reasons YAFFS2 also introduces the concept of shrink headers. For example, when a file is resized to a smaller size, YAFFS1 will mark all of the affected chunks as dirty – YAFFS2 cannot do this due to the "write once" rule. YAFFS2 instead writes a "shrink header", which indicates that a certain number of pages before that point are invalid. This lets YAFFS2 reconstruct the final state of the filesystem when the system reboots.

YAFFS2 uses a more abstract definition of the NAND flash allowing it to be used with a wider variety of flash parts with different geometries, bad block handling rules etc.

YAFFS2 later added support for checkpointing, which bypasses normal mount scanning, allowing very fast mount times. Performance will vary, but mount times of 3 seconds for 2 GB have been reported.[citation needed]

See also

[edit]

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

YAFFS

View on Grokipedia
from Grokipedia
YAFFS (Yet Another Flash File System) is an open-source, optimized for NAND and NOR in embedded systems, providing robust data storage with features like and garbage collection tailored to flash constraints. Developed by Charles Manning of Aleph One starting in late 2001, YAFFS was created to address the limitations of traditional file systems on NAND flash, which suffers from issues like limited write cycles, bad blocks, and the need for error-correcting codes (ECC). The first version, YAFFS1, was released in early 2002 and used a modified log structure with deletion markers to manage file operations on smaller page sizes (512 bytes plus spare). YAFFS2, introduced later to support larger pages (2KB+), employs a true log structure with sequence numbers for more efficient handling of (MLC) and triple-level cell (TLC) NAND, eliminating deletion markers and improving performance. Key design principles of YAFFS emphasize simplicity, portability, and reliability: it avoids complex allocation tables like those in or , instead writing tagged data chunks sequentially to spread wear evenly across blocks without dedicated wear-leveling algorithms. Garbage collection in YAFFS reclaims space by scanning for deleted chunks and erasing blocks, operating passively when free space is ample or aggressively during low availability, while bad blocks are marked and skipped to maintain integrity. Error correction relies on driver-provided or built-in ECC, with YAFFS1 including a fast implementation for single-bit errors in 256-byte payloads. YAFFS is highly portable, running on , uClinux, Windows CE, and real-time operating systems (RTOS) without OS-specific dependencies, and it supports both SLC and MLC/TLC flash types. Licensed under the GNU Public License (GPL) or commercial terms, it has been deployed in millions of devices, including , cameras, mobile phones, and critical applications like NASA's (TESS), where it has reliably stored data in space since 2018.

History and Development

Origins and Motivation

YAFFS, or Yet Another Flash File System, was initiated by Charles Manning in late 2001, with the first code written in January 2002, as a response to the growing need for a robust optimized for NAND flash in embedded devices. At the time, NAND flash was rapidly gaining adoption due to its low cost, high density, and fast write speeds compared to NOR flash, but existing file systems struggled to handle its unique constraints, such as page-based writes, block erases, and (OOB) metadata areas. Manning, working with Toby Churchill Ltd., aimed to create a solution that addressed reliability issues when NOR-optimized systems like JFFS were adapted for NAND, which often led to and inefficiency. The primary motivation stemmed from the limitations of prior file systems in resource-constrained environments, such as mobile phones and set-top boxes, where NAND's erase-block architecture and limited write cycles demanded specialized handling to prevent wear and fragmentation. Systems like JFFS and its successor , originally designed for NOR flash, suffered from slow mounting times and high memory usage when applied to NAND, as they did not natively account for bad blocks or the need for error correction in the OOB area, resulting in fragmentation during log-structured operations. Similarly, simpler approaches like with a Flash Translation Layer (FTL), as used in , proved unreliable for critical embedded applications due to inadequate wear management and error handling. Manning's design sought a POSIX-compliant, log-structured that exploited NAND's features for efficient performance while minimizing overhead in low-RAM settings. By May 2002, when the initial public code was released, YAFFS had already demonstrated stability in early testing, driven by the surge in NAND-equipped devices that required a capable of reliable data integrity without the boot-time delays common in alternatives like JFFS2. This focus on NAND-specific optimizations positioned YAFFS as a foundational tool for embedded and other real-time operating systems, emphasizing robustness over the general-purpose designs of its predecessors.

Key Milestones and Releases

YAFFS development commenced in late 2001, with the initial YAFFS1 prototype announced publicly on September 23, 2002, and open-sourced under the GNU General Public License (GPL) with key contributions from Aleph One Ltd. In September 2002, the project's header files were relicensed under the GNU Lesser General Public License (LGPL) to enable easier integration with bootloaders and non-GPL environments. By April 2003, a non-GPL licensing option was introduced for YAFFS/Direct, allowing use, which evolved into dual GPL version 2 and licensing by 2008 to encourage wider adoption across operating systems. YAFFS2 was released in 2004 to accommodate larger NAND flash page sizes of 2 KB and beyond, overcoming YAFFS1's constraints with emerging hardware. YAFFS saw significant adoption in early Android versions, serving as the default from Android 1.0 (released September 2008) to Android 2.2 (released May 2010), powering millions of devices and providing real-world testing for its robustness. Maintenance has continued through the official yaffs.net site. As of 2025, YAFFS remains actively maintained for embedded applications, supporting ports to , Windows CE, and standalone configurations without an underlying OS.

Core Architecture

Log-Structured Design

YAFFS employs a (LSFS) design tailored for NAND flash memory, where all modifications—including writes, metadata updates, and deletions—are appended sequentially to the end of a circular log rather than overwriting in place. This avoids the wear associated with repeated programming of the same flash cells, as NAND flash has a limited number of program/erase cycles per block, typically around 100,000 for SLC NAND. By treating the flash as an append-only medium, YAFFS ensures efficient utilization of NAND's sequential write capabilities, with invalid old versions left until garbage collection erases entire blocks to reclaim space. This log-like organization mimics a across flash blocks, promoting robustness against power failures through its append-only nature. During the mounting process, YAFFS rapidly reconstructs the file system's state by scanning the out-of-band (OOB) areas of NAND pages, where tags store metadata such as sequence numbers, object IDs, and chunk types. The scan begins with a pre-scan to sort blocks by their sequence numbers, followed by a backward traversal to identify the most recent valid entries, enabling the system to build in-memory representations like Tnodes—tree nodes that organize directory and file hierarchies—without needing to read all user data. This OOB-based checkpointing allows mounting times on the order of seconds for large volumes, such as under 3 seconds for a 128 MB partition, far quicker than full-media scans required by some other flash file systems. The process ensures crash recovery by relying solely on tag integrity, marking any inconsistent blocks for later handling. Writes in YAFFS occur sequentially at the page level, appending new chunks to the current block until it is full, at which point the allocates a fresh erased block to continue the log. This aligns with NAND's page-programming semantics, where each write (typically 200 µs per page) is atomic and out-of-place, preventing partial updates that could corrupt . Deletions and modifications do not erase immediately; instead, they append new headers or markers that invalidate prior chunks via tags, deferring actual erasure to garbage collection, which copies valid to new locations before block erasure to consolidate space and integrate with . This sequential paradigm simplifies flash management while maintaining high write throughput. YAFFS achieves compliance for core operations like file creation, deletion, and renaming by leveraging its tagging system for atomic updates, where each operation appends a new object header with an incremented sequence number to reflect the change while invalidating the previous version. For instance, renaming a file involves writing a new header linking the name to the existing object ID, ensuring the update is visible atomically upon the next mount or scan without risking inconsistency. This design supports standard semantics such as hierarchical directories and permissions, interfacing seamlessly with operating system virtual file systems like Linux VFS, while the log structure inherently provides journaling-like durability for metadata.

Data Structures and On-Flash Format

YAFFS employs a log-structured approach where is appended sequentially to NAND flash pages, with metadata stored in out-of-band (OOB) areas to facilitate efficient access and recovery. Each NAND page, typically 512 bytes or 2 kilobytes in size depending on the flash geometry, holds user in the main area and metadata tags in the OOB , which ranges from 16 to 64 bytes. These tags include key fields such as the chunk ID (indicating the position within a file), or sequence number (for versioning and ordering), and object ID (uniquely identifying files or directories). The OOB area also accommodates error-correcting codes (ECC) for both and tags, ensuring during reads. Chunk headers, which contain object metadata, are written as full pages when objects are created or updated, often at the start of a new block but appended sequentially in the log, serving as summaries for rapid filesystem scanning and mount-time recovery. These headers contain object metadata including the file or directory name, type (e.g., file, directory, symlink), parent object ID, and a for the name to aid in verification. In YAFFS2, chunk headers are augmented with sequence numbers to track block allocation order, enabling the filesystem to distinguish the most recent version of data after power failures. In-memory data structures optimize path resolution and attribute management while minimizing RAM usage. Tnodes form a multi-level for mapping file offsets to physical chunk locations: level-0 tnodes hold up to 16 two-byte chunk ID entries for small files, while higher levels use eight four-byte pointers to child tnodes, with each tnode sized at 16 to 32 bytes. Object headers in memory mirror on-flash counterparts, storing attributes such as permissions (st_mode), ownership (st_uid, st_gid), timestamps, and file size, linked to the corresponding on-flash chunk for quick attribute lookups. The tag format emphasizes robustness through 32-bit fields in the OOB for sequence numbers in YAFFS2, which increment per block erasure to provide a chronological log and prevent reuse of stale tags. This mechanism supports crash recovery by allowing the filesystem to scan tags in reverse sequence order during mounting, reconstructing the current state without full rescans, and enables deduplication by marking obsolete tags as superseded. In YAFFS1, a simpler two-bit per chunk achieves similar deduplication but with limitations on large filesystems.

Flash Management Mechanisms

Wear Leveling and Garbage Collection

YAFFS implements implicitly through its log-structured architecture, which appends all writes sequentially to the end of the log rather than updating data in place, thereby avoiding concentrated wear on specific blocks. This design ensures that no single block experiences disproportionately high traffic, as modifications and deletions simply advance the log head while invalidating older entries. Unlike systems with explicit counters, YAFFS relies on sequential numbering embedded in chunk tags—such as 2-bit serial numbers in YAFFS1 or broader numbers in later variants—to track block chronology and age without dedicated wear-tracking hardware or software modules. By prioritizing the erasure of older blocks that accumulate invalid pages, this mechanism distributes erase operations evenly, supporting the typical endurance of NAND flash devices rated for over 100,000 program/erase cycles. Garbage collection in YAFFS is invoked when available free space drops below a configurable threshold, often managed by reserving a small number of blocks—typically three—to buffer against immediate shortages and enable proactive reclamation. The process targets the "dirtiest" block, defined as the one containing the highest proportion of invalid (obsolete) chunks, to maximize space recovery efficiency. Valid chunks from the selected block are relocated to a fresh allocation point at the log head, their originals marked as deleted via tag updates, after which the entire block is erased and returned to the empty pool for reuse. This block-by-block approach constrains the scope of each cycle, minimizing latency spikes during foreground operations, and can incorporate occasional random block selection to further balance wear if needed. Space is tracked using per-device bitmaps that indicate chunk usage status, enabling rapid identification of empty blocks for allocation and efficient scanning during collection. Partial block fills are accommodated by sequential chunk allocation, with any trailing space in the log handled through continuation to subsequent blocks or special markers like shrink headers to denote file boundaries and avoid premature erasure of valid data. If a bad block is encountered during relocation, it is isolated and skipped, with collection proceeding on alternatives.

Bad Block Handling and Error Correction

YAFFS manages bad blocks by distinguishing between factory-marked defects and those arising during operation. Factory bad blocks, present in NAND flash upon delivery, are identified during the initial mount scan by checking the out-of-band (OOB) area of the first page in each block; for instance, in YAFFS1, byte 5 set to 0x00 indicates a factory bad block, which is then skipped and excluded from use. Runtime bad blocks are detected when operations fail, such as write or erase errors, or when multiple ECC failures occur—typically three or more errors in a block. Upon detection, YAFFS retires the block by marking it as bad using soft mechanisms: in YAFFS1, this involves writing a marker like 0x59 ('Y') in the OOB area of the first page, while YAFFS2 delegates marking to underlying driver functions that support varied OOB layouts or retired block lists. Error correction in YAFFS primarily leverages the NAND hardware or driver-provided ECC stored in the OOB area, which corrects single-bit errors and detects double-bit errors per 256-byte data chunk, assuming the underlying system handles . YAFFS itself does not implement data ECC but includes checksums in its tags to ensure metadata integrity, such as verifying object and chunk identifiers during reads. If ECC correction fails on a tag, the chunk is ignored to prevent propagation of errors. At mount time, YAFFS conducts a comprehensive scan to verify all tags, rebuild the state, and mark any runtime bad blocks encountered, effectively skipping defective blocks to maintain usability; this process accommodates typical NAND defect rates, such as up to approximately 2% factory bad blocks as seen in devices like the NAND128-A. Recovery from uncorrectable bit errors relies on ignoring affected chunks and retiring blocks, with live data copied during garbage collection to fresh blocks, ensuring overall system reliability.

Versions

YAFFS1

YAFFS1, the inaugural version of the Yet Another Flash File System (YAFFS), was specifically engineered for early NAND flash memory devices featuring 512-byte pages accompanied by a 16-byte (OOB) area. Originally designed for 512-byte pages, it was extended to support 1 KB pages (e.g., M18 devices). This design catered to the constraints of single-plane NAND flash prevalent in the late 1990s and early 2000s, ensuring compatibility with hardware like cards and initial embedded storage solutions. By leveraging the limited OOB space efficiently, YAFFS1 provided a robust that prioritized reliability and simplicity for resource-constrained environments. Central to YAFFS1's architecture is its tag layout, which uses 7 bytes for core fields including object ID (2 bytes) to uniquely identify files or directories, chunk ID (2 bytes) indicating the position of the data chunk within the object (with 0 reserved for object headers), byte count (1 byte) specifying the valid data bytes in that chunk, plus status bytes for deletion marker and serial number. This scheme, along with 6 bytes for error correction codes (ECC) and 2 bytes for additional status, fits within the 16-byte OOB, enabling quick identification and reconstruction of the file system structure during scans. The system treats each 512-byte page as a "chunk," writing data sequentially in a log format across erasable blocks to minimize wear and handle the write-once nature of NAND flash. Despite its innovations, YAFFS1 exhibits notable limitations inherent to its era-specific design. It lacks native support for NAND pages larger than 1 KB, restricting its applicability as flash technology evolved toward higher capacities. The maximum volume size is 1 GB, constrained by addressing fields in the tags. While early versions required full scans on mounting to rebuild the in-memory object tree, checkpointing (added in 2006) enables faster recovery by preserving metadata state, which, while manageable, improves startup times in larger volumes. These constraints positioned YAFFS1 as a foundational but non-scalable solution. In terms of performance, YAFFS1 excels in initial mounting, achieving very fast times on typical hardware of the period, thanks to its straightforward scanning and later checkpointing support. This efficiency made it particularly suitable for early embedded devices such as personal digital assistants (PDAs) and mobile phones, where quick times and low overhead were critical. Its log-structured approach also ensured atomic writes and crash resilience without complex journaling, aligning well with the needs of battery-powered, flash-limited systems.

YAFFS2

YAFFS2 represents a significant of the YAFFS , specifically tailored to accommodate the increasing capacities and geometries of modern NAND devices prevalent since the early . Unlike its predecessor, YAFFS2 was developed to support NAND flash with 2 KB page sizes and 64-byte (OOB) areas, enabling compatibility with larger-scale storage while maintaining the log-structured approach for efficient and reliability. It extends this support to pages up to 4 KB or larger, as well as multi-plane operations in both single-level cell (SLC) and (MLC) NAND configurations, allowing deployment on a broader range of contemporary flash hardware. A key improvement in YAFFS2 lies in its refined tagging mechanism, which uses compact tags—28 bytes in size (16 for data, 12 for ECC)—that fit within the standard NAND OOB area without requiring additional space. These tags incorporate sequence numbers assigned to entire erase blocks, which increment monotonically during writes to ensure accurate identification of the most recent data versions. This design enhances deduplication by facilitating the detection and resolution of duplicate or obsolete chunks during garbage collection, while also bolstering crash safety through reliable reconstruction of the state post-power failure. YAFFS2 introduces several advanced features to optimize performance and usability on embedded systems. Checkpointing enables sub-second mount times by preserving a snapshot of the file system's metadata and block allocation state in dedicated chunks, allowing rapid recovery without full scans on boot. It supports volume sizes up to 4 TB with sufficient RAM for metadata caching, though practical limits depend on hardware (e.g., 4 GB with standard 32-bit MTD). Additionally, an auto-compatibility mode permits seamless operation with YAFFS1-formatted volumes at runtime, sharing much of the core codebase for easier integration. Further optimizations in YAFFS2 address the variabilities of dynamic NAND chips, including improved handling of resize operations and sequential write patterns to minimize erase cycles and boost throughput—achieving up to 3x faster writes and 4-34x faster deletes compared to YAFFS1 on equivalent hardware. These enhancements made YAFFS2 a practical choice for early Android devices, where it served as the for the read-only /system partition in versions 1.x, ensuring robust storage for core OS components on NAND-based handsets. A specialized variant, YAFFS2e, adapts these principles for NOR flash memory's distinct erase and write behaviors.

YAFFS2e

YAFFS2e is a variant of YAFFS2 optimized for NOR flash, leveraging its byte-addressable read/write capabilities and block-erasable nature to provide a reliable for embedded applications. Unlike NAND flash implementations that utilize (OOB) areas for metadata, YAFFS2e stores all necessary tags and metadata in-band within the main area, eliminating reliance on dedicated spare bytes. Key adaptations in YAFFS2e include the use of compact tags embedded directly in the data chunks, which reduces overhead and aligns with NOR's uniform block structure without OOB support. This design enables compatibility with small to medium NOR devices and facilitates faster random write performance by avoiding the fragmentation issues common in NAND due to OOB constraints. YAFFS2e operates either standalone via its direct interface or integrated with embedded operating systems such as or , making it suitable for resource-constrained environments like and consumer devices. It does not incorporate assumptions about built-in error correction codes (ECC), instead depending on the underlying flash driver or hardware for ECC implementation to ensure . Developed as an extension of YAFFS2 in the mid-2000s, YAFFS2e preserves the core log-structured approach—appending new data sequentially to minimize —but simplifies management for NOR's consistent erase block uniformity, enhancing overall efficiency in non-NAND scenarios.

Implementations and Usage

Integration with Operating Systems

YAFFS integrates with operating systems primarily through modular interfaces that allow it to function as a layer atop flash hardware drivers, with a focus on embedded environments. For , YAFFS operates as an out-of-tree kernel module rather than mainline code, requiring users to apply patches to the kernel source before compilation. Initial support for kernels began with version 2.5.70 in 2003, followed by compatibility with 2.6 kernels in 2004 via MTD () interfaces. Efforts to achieve mainline inclusion started in 2010, involving modifications to align with kernel APIs, but YAFFS remains external to the official kernel tree as of 2025. When integrated, YAFFS hooks into the (VFS) layer to provide standard operations such as mounting, unmounting, (fsync), and directory traversal, enabling seamless use within user space. Kernel configuration for YAFFS in involves enabling options like CONFIG_YAFFS_FS and CONFIG_YAFFS_YAFFS2 during the build process, typically after patching the fs/yaffs2 directory into the kernel source tree. These options allow selection between YAFFS1 and YAFFS2 variants, with dependencies on MTD support for NAND flash access. Mount options further customize behavior, such as tags_ecc_on to enforce error-correcting code (ECC) checks on tags even when hardware ECC is present, or tags_ecc_off to disable them for on reliable media. YAFFS volumes are inherently sized to the underlying flash partition, with no dedicated resize tool analogous to resize2fs; expansion requires repartitioning the flash and recreating the image using utilities like mkyaffs2image from the yaffs2-utils package. Beyond , YAFFS has been ported to several real-time operating systems (RTOS) and embedded platforms. The Windows CE port, completed in 2002, involved creating a wrapper to interface with the WinCE manager and NAND drivers, preserving the core YAFFS algorithms while adapting to CE's for file operations. For , an official integration exists through eCosCentric's , linking YAFFS to the eCos fileio layer and NAND driver stack, supporting both polled and interrupt-driven modes with automatic bad block handling. support for YAFFS2 is available, as documented in RTEMS user manuals, allowing it to serve as a NAND-optimized within RTEMS's DOS framework, often paired with simulated or hardware flash. YAFFS also supports standalone operation without an underlying OS, particularly for resource-constrained microcontrollers, via the YAFFS Direct Interface (YDI). This provides direct function calls for operations, requiring implementers to supply basic services like memory allocation, locking, and low-level NAND access. YDI enables bare-metal integration on 32-bit or 64-bit architectures such as or MIPS, with minimal RAM footprint, making it suitable for environments lacking a full RTOS. As of 6.x kernels in 2025, YAFFS remains a viable but less commonly used option compared to , which offers better scalability for modern NAND. Maintenance continues through the official YAFFS project, with users relying on the yaffs2-utils package for image management tasks outside the kernel. This package, available via source repositories, includes tools for creating, extracting, and verifying YAFFS images, essential for deployment in custom builds.

Real-World Applications

YAFFS found early adoption in mobile operating systems, particularly as the default for NAND flash storage in early releases of Android. In versions 1.0 to 2.2 (released between 2008 and 2010), it managed the /data and /system partitions on NAND-based devices, providing reliable log-structured storage suited to the era's flash hardware constraints. This usage supported core functions like app data persistence and system files, but YAFFS was phased out starting with Android 2.3 in favor of for improved performance on multi-core processors. In embedded systems, YAFFS has been deployed across diverse hardware requiring robust NAND flash management, including routers, set-top boxes for TV broadcasting, and digital video recorders akin to DVRs. It powers industrial controls, from point-of-sale terminals and office copiers to heavy machinery like lifts and cranes, where power-loss resilience and ensure in mission-critical environments. Reports from 2010 highlight its application in varied embedded contexts, spanning consumer products such as machines to high-reliability sectors like systems. Beyond general embedded use, YAFFS serves in specialized domains like medical devices and automotive electronic control units (ECUs), leveraging its error correction and bad block handling for safety-critical storage. It also operates standalone in firmware updaters, facilitating secure over-the-air updates on NAND flash without host OS dependencies. As of 2025, YAFFS persists in niche applications within legacy Internet of Things (IoT) ecosystems and space-constrained microcontrollers (MCUs), prioritizing reliability and low overhead over raw speed in environments like remote sensors and satellite systems. For instance, NASA's Transiting Exoplanet Survey Satellite (TESS), launched in 2018, continues to rely on YAFFS for radiation-hardened data storage in orbit. Its integration with operating systems such as Linux enables these deployments in power-sensitive, flash-dominant hardware.

References

  1. https://yaffs.net/
  2. https://yaffs.net/archives/yaffs-original-specification
  3. https://yaffs.net/documents/how-yaffs-works
  4. https://yaffs.net/archives/yaffs-nand-specific-flash-file-system-introductory-article
  5. https://yaffs.net/sites/default/files/downloads/yaffs.pdf
  6. https://yaffs.net/archives/yaffs-history
  7. https://github.com/Aleph-One-Ltd/yaffs2
  8. https://yaffs.net/yaffs-licence-faqs
  9. https://wookware.org/talks/yaffsupdate-ELCE-2010.pdf
  10. https://yaffs.net/logos/google-android
  11. https://stackoverflow.com/questions/23946910/what-file-system-does-android-use
  12. https://yaffs.net/yaffs-2-specification
  13. https://dubeyko.com/development/FileSystems/YAFFS/HowYaffsWorks.pdf
  14. https://yaffs.net/sites/default/files/downloads/HowYaffsWorks.pdf
  15. https://yaffs.net/documents/yaffs-robustness-and-testing
  16. https://www.edn.com/nand-flash-memories-bad-block-management-and-the-yaffs-file-system/
  17. https://yaffs.net/sites/default/files/downloads/YaffsNandFailureMitigation.pdf
  18. https://yaffs.net/yaffs-overview
  19. https://ro.ecu.edu.au/cgi/viewcontent.cgi?article=1100&context=adf
  20. https://yaffs.net/documents/faq
  21. https://bootlin.com/blog/managing-flash-storage-with-linux/
  22. https://groups.google.com/g/fa.linux.kernel/c/PhOUYg9UkLk
  23. https://yaffs.net/archives/howto-incorporate-yaffs-linux
  24. https://code.google.com/archive/p/yaffs2utils
  25. https://www.ecoscentric.com/middleware/yaffs.shtml
  26. https://yaffs.net/documents/yaffs-direct-interface
  27. https://github.com/13701761349/yaffs2utils
  28. https://www.eevblog.com/forum/embedded-computing/yaffs2-for-linux-2-6-32/
  29. https://hackmag.com/mobile/android-1
  30. https://www.researchgate.net/publication/330900684_Forensic_Analysis_of_YAFFS2
  31. https://yaffs.net/yaffs-action
  32. https://www.omi.me/blogs/firmware-features/how-to-implement-file-systems-on-embedded-flash-in-your-firmware
Add your contribution
Related Hubs
User Avatar
No comments yet.