Recent from talks
Bedar (ship)
Knowledge base stats:
Talk channels stats:
Members stats:
Bedar (ship)
The term bedar (spelled "bedor" in Terengganu) is applied to a wide variety of boats of the east coast of Malaysia that carry one or two junk sails and lack the typical transom stern of the perahu pinas. These junk rigged boats are usually built in the Terengganu area. The stern of the bedar is a classical "canu" or "pinky stern," being a typical "double ender", a bit like a modern ship's lifeboat, with a very full turn of the bilge and with markedly raked stem and stern. They came in small versions as small one-masted fishing vessels — anak bedar (Malay for child bedar) and were built as big as 90 feet over deck (LOD). The majority of the bedars were usually 45 to 60 feet (13.7–18.3 m) over deck. The bedar, like all Terengganu boats, was built of Chengal wood by the Malays since the 19th century and roamed the South China Sea and adjacent oceans as a highly seaworthy traditional sailing vessel.[citation needed]
The Malay word bedar means an elongated and flattened beak, broadening towards the tip (i.e. like the bill of a platypus).
The bedar is a sailing junk that is mainly built in the kuala (English: rivermouth) of the Terengganu River.
The smaller and medium-sized bedars often had a fine slanting projecting prow of various lengths and a short one at the similarly built stern. The bowsprit was resting on top of this forward projection which is called sudu (English: spoon or duck's bill).
The boats equipped with a sudu were referred to as bedar luang sudu (from Malay word sudu: spoon, or sudu itek: duck's bill). The conspicuous sheer (ship) of the bedar varied as well. The smaller ones with a long projection having more sheer and the bigger ones with a short sudu and short sheer. Bedars above 70 feet (21 m) rarely carried a long sudu but featured almost straight stem and stern posts, very much like the bedar Dapat.
Like the pinas, the bedar over 45 feet/13.7 m (LOD), carried two masts, one in the bow, called "topan", slightly raked forward; The main mast, called "agung" was placed a bit forward of the center of the boat. The bedar had a very long bowsprit, slightly bent downwards by the bobstay. Both masts carried a fully battened lug or "junk-sail" of typical Chinese design. These sails were not made of cloth but of a matting material called "tikal" that is also used for floor matting and other purposes. Like most junk sails the battens were made of bamboo, usually creating 6 individual panels to the sail. The halyard was attached almost in the middle of the sail, and since the luff, or edges, of the sail was nearly straight and only about half the length of the markedly convex leech, the yard, when hoisted, was sitting in an angle of about 15° – 20° with the vertical.
The foresail was set on the port side of the topan and the mainsail on the starboard side of the agung. A relatively small jib was set on the bowsprit. All bedars, even those up to or more than 80 feet (24 m) were steered by a tiller with a pulley block system easing the strain on a conventional rudder hinged on the stern post. This tiller was operated from within the round cabin (cup) on the dandan platform over the stern. The hold stored cargo.
The hull of the bedar is influenced by the Arab dhow with their long raked stemposts and the dows often being double ended vessels.
Hub AI
Bedar (ship) AI simulator
(@Bedar (ship)_simulator)
Bedar (ship)
The term bedar (spelled "bedor" in Terengganu) is applied to a wide variety of boats of the east coast of Malaysia that carry one or two junk sails and lack the typical transom stern of the perahu pinas. These junk rigged boats are usually built in the Terengganu area. The stern of the bedar is a classical "canu" or "pinky stern," being a typical "double ender", a bit like a modern ship's lifeboat, with a very full turn of the bilge and with markedly raked stem and stern. They came in small versions as small one-masted fishing vessels — anak bedar (Malay for child bedar) and were built as big as 90 feet over deck (LOD). The majority of the bedars were usually 45 to 60 feet (13.7–18.3 m) over deck. The bedar, like all Terengganu boats, was built of Chengal wood by the Malays since the 19th century and roamed the South China Sea and adjacent oceans as a highly seaworthy traditional sailing vessel.[citation needed]
The Malay word bedar means an elongated and flattened beak, broadening towards the tip (i.e. like the bill of a platypus).
The bedar is a sailing junk that is mainly built in the kuala (English: rivermouth) of the Terengganu River.
The smaller and medium-sized bedars often had a fine slanting projecting prow of various lengths and a short one at the similarly built stern. The bowsprit was resting on top of this forward projection which is called sudu (English: spoon or duck's bill).
The boats equipped with a sudu were referred to as bedar luang sudu (from Malay word sudu: spoon, or sudu itek: duck's bill). The conspicuous sheer (ship) of the bedar varied as well. The smaller ones with a long projection having more sheer and the bigger ones with a short sudu and short sheer. Bedars above 70 feet (21 m) rarely carried a long sudu but featured almost straight stem and stern posts, very much like the bedar Dapat.
Like the pinas, the bedar over 45 feet/13.7 m (LOD), carried two masts, one in the bow, called "topan", slightly raked forward; The main mast, called "agung" was placed a bit forward of the center of the boat. The bedar had a very long bowsprit, slightly bent downwards by the bobstay. Both masts carried a fully battened lug or "junk-sail" of typical Chinese design. These sails were not made of cloth but of a matting material called "tikal" that is also used for floor matting and other purposes. Like most junk sails the battens were made of bamboo, usually creating 6 individual panels to the sail. The halyard was attached almost in the middle of the sail, and since the luff, or edges, of the sail was nearly straight and only about half the length of the markedly convex leech, the yard, when hoisted, was sitting in an angle of about 15° – 20° with the vertical.
The foresail was set on the port side of the topan and the mainsail on the starboard side of the agung. A relatively small jib was set on the bowsprit. All bedars, even those up to or more than 80 feet (24 m) were steered by a tiller with a pulley block system easing the strain on a conventional rudder hinged on the stern post. This tiller was operated from within the round cabin (cup) on the dandan platform over the stern. The hold stored cargo.
The hull of the bedar is influenced by the Arab dhow with their long raked stemposts and the dows often being double ended vessels.
Recent media