Hubbry Logo
Line and lengthLine and lengthMain
Open search
Line and length
Community hub
Line and length
logo
7 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Line and length
Line and length
Line and length
View on Wikipedia
from Wikipedia

Line and length in cricket refers to the direction and point of bouncing on the pitch of a delivery.[1][2][3] The two concepts are frequently discussed together.

Line

[edit]

The line of a delivery is the direction of its trajectory measured in the horizontal plane. More simply, it is a measure of how far to the left or right the ball is travelling, compared to a line drawn straight down the pitch. It is usually referred to in terms of the directions off (away in front of the batsman), and leg or on (in towards or behind the batsman), rather than left and right, however.

Different lines that the ball may be said to be travelling on may be towards off stump, middle stump or leg stump, outside leg stump, or outside off stump. Balls on a line outside off stump may be said to be in the "corridor of uncertainty" if they are within 12 inches of the line of off stump. Wider deliveries may be said to be giving a batsman "width". Balls delivered on a line outside leg stump are often referred to as "going down the leg side", or alternatively "on the pads", referring to the batsman's leg protection. Short pitched leg-side deliveries are often referred to as bodyline, literally meaning on the line of the body.

Line controls how much room the batsman has to play various shots, and sometimes dictates what shot he must play. A line directed at the wicket, for example, must be defended with the bat, as failing to hit the ball will result in the batsman being out bowled, whilst a batsman blocking the ball with the body is likely to be out leg before wicket.

Despite this most direct method of getting the batsman out, bowlers often concentrate their line outside off stump, where the batsman does not necessarily have to hit the ball to avoid being out. A line just outside off stump, sometimes referred to as the corridor of uncertainty, may cause the batsman to be in two minds whether or not he needs to hit the ball to prevent it hitting his wicket. In this state, the batsman has little choice but to attempt to hit the ball, as not doing so could be disastrous. By thus forcing the batsman to play at the ball with some element of uncertainty, the bowler's goal is to induce a poorly executed shot that may offer a catch to a fielder, or ricochet the ball into the wicket.

Line can also be used strategically to restrict run scoring. One method is to stack the fielders predominantly on either the leg or off side of the field, and then bowl consistently with a matching line, to make it difficult for the batsman to hit the ball to the opposite side of the field.

A deliberate policy of aiming the line of the ball at the batsman's body was employed by England during their 1932-1933 tour of Australia. This dangerous tactic has since been outlawed. See Bodyline for full details.

Length

[edit]
A diagram showing the relative positions of short, good and full lengths

The length of a delivery is how far down the pitch towards the batsman the ball bounces. It is described as being either short (bouncing closer to the bowler), full (bouncing nearer the batsman), or a good length (an optimal length, somewhere in between).

The length of a ball controls how high the ball rises from the pitch as it reaches the batsman's position. A ball pitched too short may rise high and lose some of its pace, making it easy for the batsman to hit. A ball pitched too full does not necessarily deviate horizontally in its flight, also making it easy for the batsman to hit. A good length ball is a compromise between these two options, bouncing far enough from the batsman for lateral deviation to be significant, but not too far that he can react easily to hit it. For fast bowlers the "good length ball" is usually six to eight metres in front of the batsman, and for slower bowlers (spin) it is usually at about three to four metres before the batsman, though the optimal length will vary according to the state of the pitch, prevailing weather conditions and the height and playing style of the batsman.

A bowler can use variation in length to upset the rhythm of a batsman. A typical sequence would be a series of slightly short balls to force the batsman into playing shots with his weight on the back foot, to allow him more time to hit the ball, followed by a full ball bouncing near the batsman's legs. If the batsman does not react to the change in length quickly enough, he can be left with his weight on the back foot and, if he misses the ball with his bat, in danger of being out either bowled or leg before wicket.

Another attacking ploy is to pitch a ball very short, making it bounce up around head height as it passes the batsman. Such a bouncer requires the batsman to avoid being hit, and may intimidate him into uncertainty about the next few balls.

References

[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Line and length

View on Grokipedia
from Grokipedia
In , line and refer to two essential aspects of technique: the line is the direction in which the travels relative to the batsman's stumps, while the is the point on the pitch where the bounces after being delivered. These elements together determine how challenging a delivery is for the batsman, with effective control allowing bowlers to restrict scoring and create wicket-taking opportunities by forcing defensive play or edges. Mastering line and is a of professional , often prioritized over raw speed or variations, as consistency in these areas builds pressure across an . The ideal line targets what is known as the "corridor of uncertainty," a narrow channel around and just outside the off stump that leaves batsmen unsure whether to play or leave the ball. Bowlers avoid lines too wide (which concede easy runs) or too straight on the (which risk leg-side deflections), adjusting based on conditions like swing or seam movement to exploit the batsman's positioning. For instance, fast bowlers may probe this corridor early in an to induce false shots, while spinners might use a straighter line to target the stumps after building turn. Length is categorized into several types, each influencing the batsman's response: a or half-volley invites drives, a good (typically 6-8 from the stumps) commits the batsman to an awkward forward or back-foot defense, short of a risks pulls or hooks, and long hops are punishable with cuts. The optimal good varies by pitch—shorter on bouncy surfaces to exploit bounce, fuller on slower ones to encourage lbw dismissals—and by format, with shorter lengths favored in limited-overs for quicker confrontations. Data from coaching sessions shows that only about 36% of deliveries often land in this good zone, highlighting the required for consistency. Overall, line and length form the foundation of strategy, enabling bowlers to adapt to match situations, batsman weaknesses, and environmental factors like weather or pitch wear. Iconic bowlers like exemplified this through relentless accuracy, taking by repeatedly testing the same probing areas rather than relying on unorthodox variations. In , drills emphasize hitting a target zone on the pitch to build this precision, proving that sustained focus on line and length correlates directly with improved tallies.

Introduction

Overview

In cricket bowling, line and length represent the foundational elements of accuracy, determining a bowler's ability to challenge the batsman effectively. The line refers to the lateral direction of the delivery relative to the batsman's stumps, while the length indicates the point on the pitch where the ball bounces. Together, they serve as primary control factors, enabling bowlers to restrict scoring opportunities and increase the likelihood of taking wickets by forcing the batsman into uncertain defensive or attacking responses. The terminology of line and length originated in 19th-century English , emerging as the sport formalized its rules and techniques during a period of rapid evolution in styles and pitch preparation. This era saw bowlers increasingly emphasize precision over raw pace or guile alone, with the concepts becoming central to and match analysis as transitioned from informal village games to organized professional play. Mastery of line and distinctly separates bowlers from amateurs, as consistency in these areas allows elites to maintain pressure across long spells, whereas inconsistencies often result in loose deliveries that concede easy runs or boundaries. For instance, deviations in line might allow batsmen to free their arms without risk, while erratic lengths can turn potential threats into hittable half-volleys or long hops, underscoring why professionals prioritize repetitive accuracy to outmaneuver skilled opponents.

Historical Context

The concept of line and length in emerged during the as bowlers transitioned from underarm deliveries, which involved rolling or skimming the ball along the ground, to more pitched deliveries aimed at consistency and accuracy rather than raw speed. Around 1775, innovative bowlers like Richard Nyren introduced the "length ball," pitching the ball at a predetermined distance from the batsman to exploit the pitch's surface and force defensive play, marking a shift toward precision as the primary weapon against batsmen. This development was further refined by figures such as Edward "Lumpy" Stevens and David Harris, who emphasized targeting specific lines outside the off stump—often described as the "corridor of uncertainty"—to challenge the batsman's judgment without relying on excessive pace. The 19th century saw further evolution with the gradual adoption of in the early 1800s, where the hand was raised above the waist but below the shoulder, building on underarm techniques but introducing greater height and potential for variation. A pivotal milestone occurred in 1864 when the (MCC) legalized , allowing the hand to extend above the shoulder, which dramatically increased delivery speed and control while elevating the strategic importance of line and length to counter skilled batsmen on improving pitches. This change, prompted by incidents like Edgar Willsher's no-balling in 1862, is widely regarded by historians as the birth of modern cricket bowling, as it demanded bowlers master accuracy to avoid wide deliveries and maximize wicket-taking opportunities. Legendary all-rounder W.G. Grace played a transformative role in popularizing consistent line and length during the late 19th century, as his impenetrable batting defense on treacherous pitches compelled bowlers to abandon speed-focused attacks in favor of precise targeting. Grace's era in the 1860s and 1870s highlighted how unerring length could neutralize even the most dominant batsmen, shifting bowling philosophies toward reliability over intimidation. Similarly, early 20th-century bowler Sydney Barnes exemplified mastery of this skill, achieving unparalleled control with his fast-medium pace and finger-spun leg breaks, taking 189 Test wickets at an average of 16.43 through variations delivered on a probing line and impeccable length that exploited conditions like matting pitches in South Africa. Barnes' technique, blending swing, spin, and accuracy at 70-80 mph, underscored line and length as the cornerstone of wicket-taking prowess, influencing generations of bowlers.

Fundamentals of Length

Definition and Measurement

In , length refers to the distance from the batsman's stumps at which the first pitches (bounces) on the pitch surface. This measurement determines the type of shot the batsman can play and the bowler's control over the delivery, with a traditional good length for fast bowlers typically falling 6 to 8 meters from the stumps, allowing the to arrive at an awkward height for the batsman after pitching. During play, is primarily assessed through visual by the bowler, batsman, and umpires, who observe the ball's from release to pitch point to make real-time judgments on shot selection, field placements, or potential infractions like excessive bounce. Pitch markings, often including reference lines at key distances (such as 6 meters for good in training setups), assist bowlers and coaches in calibrating deliveries, though these are not standardized in official matches. For precise post-match or review analysis, technologies like employ multiple high-speed cameras to track the ball's three-dimensional path, accurately pinpointing the pitch location to within centimeters and enabling detailed breakdowns of performance. The perception of length can be influenced by several delivery factors, including the bowler's run-up speed, which contributes to overall ball velocity and reduces the time available for the batsman to judge the pitch point accurately. Similarly, the ball's seam orientation at release can induce swing or seam movement, subtly altering the perceived and complicating assessment, particularly for swing bowlers operating at higher speeds.

Types of Length

In cricket bowling, lengths are categorized based on the distance at which the pitches relative to the batsman's stumps, influencing the batsman's shot selection and the bowler's potential for wickets through movement or error inducement. These categories are particularly relevant for fast bowlers in Test matches, where seam and swing are maximized on varying pitches. The primary types include the , full length, good length, and short length (including the ), each with distinct tactical roles. The yorker pitches at or just short of the batsman's toes, typically less than 2 meters from the stumps, making it a full-length delivery aimed directly at the base of the . This length forces the batsman into a hurried defensive action, often beating the bat to hit the stumps or induce lbw dismissals, as it minimizes time for shot-making. Tactically, it is highly effective for taking wickets by targeting the stumps (with an average swing of 1.76 degrees), but requires precise control to avoid straying into hittable areas; overuse can allow batsmen to adjust their guard. Full length deliveries pitch around 5-6 meters from the stumps, just short of the driving range, encouraging the batsman to play forward with attacking shots like drives. This length exploits swing and seam movement (average swing 1.49 degrees, seam 0.59 degrees), leading to a higher rate of edges (7.8%) and a relatively low of 48 balls per , as batsmen commit to the front foot. However, it carries risks, with a higher against it (31.4) and economy rate (4.0), as confident batsmen can capitalize on drives for boundaries if the ball overpitches. The good length, pitching 6-8 meters from the stumps, is the standard for fast bowlers, balancing uncertainty for the batsman by allowing the to deviate after pitching through seam or bounce. It prompts defensive play or leaves (29% of deliveries left alone), yielding the lowest (22.6) and (2.0), with optimal seam movement (0.69 degrees). Tactically, it forces hesitation between front- and back-foot shots, maximizing chances without excessive risk, though it induces fewer attacking errors (13% attacked) compared to fuller options. Short length balls, pitching beyond 9 meters and often delivered as over 10.5 meters, target the upper body for and discomfort, rising sharply to cramp the batsman's space. The variant disrupts rhythm and provokes hooks or pulls (26% attacked), providing psychological pressure and occasional catches in the deep. Despite this, it is least effective for wickets, with high batting averages (47.4 overall for short lengths) and (4.3), low stump impacts (1%), and reduced swing (0.67 degrees), making it vulnerable to aggressive counterattacks or wides if mistimed.

Fundamentals of Line

Definition and Targeting

In cricket bowling, line refers to the lateral path or direction of the ball's trajectory relative to the batsman's stumps, typically described from outside off-stump (the widest on the off side) through middle stump to leg-stump and beyond to outside leg. This positioning determines how the ball approaches the batsman laterally, influencing shot selection and defensive stance. Bowlers target specific lines by adjusting their position on the bowling crease, which alters the angle of release and thus the ball's path toward the desired stump line. For instance, moving wider on the crease allows a right-arm bowler to aim more acutely at the off-stump of a right-handed batsman, while a straighter crease position facilitates a middle or leg-stump line. Wrist action at the point of release further refines targeting, with the bowler cocking the behind the to direct its initial flight path precisely. Seam alignment complements these techniques, as the orientation of the ball's seam during release helps maintain the intended line, particularly for seam bowlers seeking subtle deviations without altering the primary direction. A bowler's inherently shapes natural line preferences due to the angle of attack. Right-arm bowlers, when over the to a right-handed batsman, typically favor off-stump lines to exploit the natural angle across the body, creating edges or forcing defensive play. In contrast, left-arm bowlers over the to the same batsman often prefer straighter lines toward middle or leg stump, angling the ball into the body for potential lbw dismissals or discomfort. This handedness-driven preference allows left-arm bowlers a tactical edge in varying lines that right-arm counterparts may find less intuitive.

Types of Line

In cricket bowling, the off-stump line targets the narrow channel, often called the "corridor of ," just outside the off stump, where the ball pitches to exploit the batsman's indecision about whether to play or leave the delivery, frequently inducing edges to slips or the keeper. This line is particularly effective for seamers and swing bowlers aiming to create and false shots without offering easy scoring opportunities. The leg-stump line directs the ball toward the batsman's pads, seeking leg before wicket (LBW) dismissals if the delivery straightens or forcing glances to the leg side for catches in short leg or fine leg positions. Bowlers use this line sparingly in defensive scenarios to restrict runs but risk easy deflections if the batsman connects well. A middle-stump line represents a direct assault, pitching in line with the central stump to threaten bowled dismissals or catches behind the batsman through straightforward yorkers or good-length balls that cramp the scoring area. This approach demands precision to avoid straying to the leg side and is often employed by pace bowlers to apply pressure in straight-on confrontations. Wide lines outside off are strategically bowled to maximize swing or seam movement back into the batsman, potentially inducing mistimed drives by forcing the batsman to reach or stretch outside off stump, thereby disrupting their balance and creating opportunities for edges, though they carry the risk of being called wide if excessive. These lines force false shots by drawing the batsman forward or across, protecting the bowler's primary targets while setting up variations in . adjustments, such as fuller deliveries for wide off lines, enhance their disruptive effects on the batsman's stance.

Strategic Applications

Combining Line and Length

In cricket bowling, the core principle of combining line and involves aligning the delivery's trajectory and pitching point to exploit the batsman's vulnerabilities, such as targeting a good just outside the off stump to maximize seam movement or swing. This integration ensures the ball lands in the "corridor of uncertainty," where the batsman must decide whether to play forward or back, increasing the likelihood of an edge to the slips or keeper. For instance, a seam bowler might pitch on a good around the off stump to encourage deviation off the pitch, forcing defensive shots that can lead to dismissals like catches behind the . Bowlers build pressure by alternating lines and lengths to disrupt the batsman's rhythm and , preventing adaptation to a predictable pattern. A common tactic is to follow a series of full-length deliveries on or around the off stump—aiming to draw the batsman forward—with a sudden angled into the , compelling a hurried defensive action or that risks a top edge. This variation keeps the batsman guessing, as consistent repetition of one type allows scoring opportunities, while strategic shifts induce errors without conceding easy runs. In practice, renowned fast bowler Glenn McGrath exemplified this approach by establishing a relentless good length outside the off stump to wear down batsmen, then varying with subtle changes to capitalize on fatigue or complacency, such as inducing an edge after prolonged denial of runs. McGrath's strategy focused on the top of off stump for his stock ball, building unyielding pressure until the batsman erred, as seen in his dismissals where repeated accuracy led to catches in the cordon without needing to offer scoring shots. Similarly, bowlers often set up a yorker by first maintaining tight good-length control, luring the batsman into a forward defensive mindset before delivering the full-length variation at the toes.

Adapting to Pitch and Conditions

Bowlers must adjust their line and length based on pitch characteristics to exploit natural variations in bounce, pace, and movement. On bouncy pitches, shorter lengths are preferred to induce steep bounce and discomfort the batsman, forcing defensive shots or edges from hurried pulls and hooks. In contrast, on slow or seaming pitches like those in England, a fuller length is essential to encourage seam movement and swing, drawing the batsman forward and increasing the chance of edges or LBW dismissals. Weather conditions further dictate these adaptations, particularly for swing bowlers. Humid or environments enhance conventional swing by helping the ball retain shine longer, prompting bowlers to target fuller lengths outside the off stump to maximize lateral movement in the air. On dry, spin-friendly pitches, spinners bowl quicker through the air with more rotation to allow the ball to grip and turn sharply off the surface, reducing the batsman's time to react and promoting catches in the slips or on the . Format-specific adjustments also play a role, with day-night matches under lights often amplifying swing due to , favoring fuller lines early on. In T20 , bowlers incorporate more variations in line and length—such as wide yorkers or slower bouncers—to counter aggressive batting, whereas Test matches demand sustained accuracy on a good length to build pressure over long spells.

Advanced Concepts

Bowling Variations

Bowlers employ seam and swing variations to alter the ball's line mid-flight, creating through subtle changes in seam orientation and wrist action. For inswing, a right-arm bowler positions the seam upright with a slight angle towards the , pushing the middle finger against the right side of the seam at release to direct the ball curving inward toward the batsman. This mid-air deviation shifts the effective line closer to the stumps, forcing the batsman to adjust their shot prematurely. In contrast, the involves angling the seam towards fine leg while softening the wrist and pushing the against the left side of the seam, causing the ball to move away from the batsman after pitching and altering the line toward the slips. Spin bowlers, particularly leg-spinners, utilize wider lines combined with fuller lengths to induce , enhancing the ball's deceptive . By bowling from a wider angle on the crease and pitching the ball fuller—typically around a good length or slightly ahead—the leg-spinner imparts side spin that leverages the , causing the ball to curve in the air towards the before turning away off the pitch. This wider line with elevated flight draws the batsman forward, complicating footwork as the alters the perceived line, often resulting in edges or lbw dismissals. Slower balls and cutters further deceive by shortening the effective length through grip modifications, disrupting the batsman's timing on the line. In slower balls, such as the or back-of-the-hand delivery, the bowler maintains high arm speed but uses a loose grip—nails pressed against the ball or wrist flicked forward—to reduce pace and add , making the ball dip shorter than anticipated and grip the pitch to deviate subtly on line. Cutters, like the off-cutter, involve rolling the fingers down one side of the seam ( on the seam with rotating right for a right-arm bowler), imparting side spin that slows the ball and causes it to cut back, effectively shortening its and pulling the line inward to target the stumps unexpectedly. A prominent example of these variations in action is the reverse swing bowled on a middle line in the later overs of an innings. With an older ball (after 35-40 overs), bowlers like or shine one side while gripping the seam angled toward slips, causing late mid-flight swing opposite to conventional direction—toward the for a right-hand batsman—turning a straight middle-stump into a devastating delivery that breaches the batsman's guard. This technique, effective on abrasive pitches, exploits the rough side's turbulence for sharp, unpredictable line alteration, often dismissing tail-enders or set batsmen in high-pressure phases.

Impact on Match Outcomes

Mastery of line and length in bowling profoundly influences match outcomes by restricting scoring opportunities and building pressure on batsmen, often tipping the balance toward victory for the bowling side. Statistical analyses reveal strong correlations between bowling consistency and key performance metrics, such as economy rate and dot-ball percentage. For instance, bowlers who maintain tight control over line and length achieve higher dot-ball percentages, which negatively correlate with runs scored (r = -0.77) and positively with wickets taken (r = 0.63), thereby enhancing their team's winning probability. In T20 , teams averaging fewer dot balls (around 38 per ) compared to opponents (45 per ) are more likely to win, with each additional dot ball reducing win odds by approximately 13%. This control is particularly evident in elite pacers, where consistent accuracy leads to lower economy rates by limiting batsmen's ability to rotate strike or attack freely. Case studies from high-stakes series underscore these correlations. During the 2005 Ashes, England's seamers—led by , , and —employed a disciplined line and length to strangle Australia's batting lineup, restricting them to low totals like 137 in the first innings at and contributing to a historic 2-1 series win. Their persistent good-length deliveries exploited English conditions, forcing errors and yielding 87 wickets across the series at an average economy below 3.0 runs per over. In ODIs, length control has similarly decided outcomes; analysis of the 2019 ODI World Cup shows that lengths (0-2 meters from the batsman) yielded zero sixes from power-hitting attempts, while half-volleys and short-pitched balls allowed significantly more boundaries (p < 0.001), enabling teams like to defend totals by prioritizing fuller lengths in death overs. Coaching programs emphasize line and length as the foundation for wicket-taking and match dominance, with drills designed to boost dot-ball percentages through targeted accuracy practice. For example, net sessions focusing on hitting specific pitch zones (e.g., 6-8 meters from the stumps) improve consistency, directly correlating with higher dot-ball rates in matches and better figures. Metrics like dot-ball percentage serve as benchmarks, where bowlers exceeding 40% in limited-overs formats often anchor and secure victories by pressuring batsmen into mistakes. This focus on fundamentals ensures bowlers not only contain runs but also create opportunities for breakthroughs, as seen in teams prioritizing such training for sustained success.

References

  1. http://news.bbc.co.uk/sport2/hi/cricket/skills/4177344.stm
  2. https://www.pitchvision.com/cricket-bowling-line-length
  3. https://bleacherreport.com/articles/2259966-glenn-mcgrath-and-10-of-crickets-greatest-metronomic-bowlers
  4. https://www.espncricinfo.com/story/cricket-through-the-ages-101531
  5. https://www.earlycricket.uk/index.php/techniques/
  6. https://www.espncricinfo.com/story/cricket-s-turning-points-overarm-bowling-437965
  7. https://www.espn.com/cricket/story/_/id/21979968/the-incredible-legacy-wg-grace
  8. https://www.cricketweb.net/sydney-barnes-the-bradman-of-bowling/
  9. https://www.espncricinfo.com/story/kartikeya-date-the-barnes-standard-671745
  10. https://www.thecricketmonthly.com/story/1154076/what-is-the-best-length-to-bowl-in-tests
  11. https://www.researchgate.net/publication/384997393_Influence_of_run-up_velocity_on_cricket_bowling
  12. https://www.tandfonline.com/doi/full/10.1080/02640414.2022.2148074
  13. https://www.espncricinfo.com/story/when-left-is-right-305838
  14. https://www.reddit.com/r/Cricket/comments/2nbi5l/fast_bowling_controlling_line/
  15. https://www.youtube.com/watch?v=M9lj6O3p7zQ
  16. https://www.khelspace.com/blogs/fitness/mastering-the-seam-a-bowlers-guide-to-unlocking-movement
  17. https://blog.moonshotsocial.com/bowling-types-in-cricket/
  18. https://www.sportskeeda.com/cricket/varieties-pace-bowling
  19. https://www.espncricinfo.com/story/ryan-harris-going-at-the-batsman-early-is-vital-for-a-swing-bowler-1024009
  20. https://www.learn-cricket.com/eng/bowling10.php
  21. https://www.espncricinfo.com/story/the-myth-of-bowling-in-the-right-areas-620808
  22. https://www.dangermouse.net/cricket/bowlstrategy.html
  23. https://www.thecricketmonthly.com/story/773201/-i-couldn-t-bring-myself-to-set-a-batsman-up-by-giving-him-runs
  24. https://www.espncricinfo.com/story/sidharth-monga-on-neil-wagner-the-pretty-boy-who-turned-hatchet-man-1066464
  25. https://www.espncricinfo.com/story/aakash-chopra-dealing-with-different-pitches-461783
  26. https://www.espncricinfo.com/story/ian-bishop-and-tom-moody-talk-about-how-to-approach-odi-bowling-in-the-t20-era-1382569
  27. https://www.pitchvision.com/swing-bowling-wrist-position
  28. https://www.zapcricket.com/blogs/newsroom/fast-bowling-variations-reverse-swing-slower-ball
  29. https://www.pitchvision.com/spin-bowling-tips-flight
  30. https://www.thecricketmonthly.com/story/1336815/harshal-patel---there-s-nothing-wrong-in-bowling-24-slower-balls-in-a-t20-spell
  31. https://mysterycricket.com/blogs/the-mystery-cricket-blog/what-is-reverse-swing
  32. https://www.researchgate.net/publication/396927910_Quantifying_the_Impact_of_Dot_Balls_on_Winning_Probability_in_T20_Cricket
  33. https://www.researchgate.net/publication/320070709_Quantifying_Cricket_Fast_Bowling_Skill
  34. https://forceforgood.co.uk/sport/cricket-2005/cricket-2005-ashes-diary/
  35. https://www.espncricinfo.com/story/the-ashes-2005-259950
  36. https://www.gocricit.com/post/best-cricket-bowling-drills-to-increase-speed-accuracy-expert-guide-2025-by-gocricit
  37. https://blog.cricheroes.com/dot-ball-in-cricket/
  38. https://www.youtube.com/watch?v=1dL5afY7Yww
Add your contribution
Related Hubs
User Avatar
No comments yet.