Hubbry Logo
Multi-Displacement SystemMulti-Displacement SystemMain
Open search
Multi-Displacement System
Community hub
Multi-Displacement System
logo
7 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Multi-Displacement System
Multi-Displacement System
Multi-Displacement System
View on Wikipedia
from Wikipedia

Chrysler's Multi-Displacement System (MDS) is an automobile engine variable displacement technology. It debuted in 2005 on the 5.7 L modern Hemi V8. Like Mercedes-Benz's Active Cylinder Control, General Motors' Active Fuel Management, and Honda's Variable Cylinder Management, it deactivates four of the V8's cylinders when the throttle is closed or at steady speeds.

The system was first offered only on passenger cars, since the heavy demands of trucks would interfere with its operation. However, it was recalibrated for 2006 and was offered on all seven models, including SUVs and 1500 series trucks, using the 5.7 L engine.

Chrysler expected that the technology would boost economy by 10% to 20%. In the Jeep Grand Cherokee with MDS, highway fuel mileage for the V8 is the same as the V6 at 21 mpg (11.2 liters per 100 km).

In order to preserve the characteristic rumble of the V8 engines, Chrysler and Eberspaecher North America designed a special exhaust system for MDS-equipped vehicles. This includes four separate mufflers, two large central ones for V8 mode and two smaller ones near the tailpipes for four-cylinder mode. Unlike the system used on Mercedes-Benz V12 engines, also designed by Eberspaecher, the system is mechanically passive.

Applications:

See also

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Multi-Displacement System

View on Grokipedia
from Grokipedia
The Multi-Displacement System (MDS) is a engine technology developed by that seamlessly deactivates four cylinders in V8 engines during low-load cruising conditions to enhance fuel economy while maintaining full power output when needed. Introduced in 2004 for the 2005 model year, MDS debuted on the 5.7-liter HEMI V8 in vehicles such as the and R/T, marking the first application of such technology in sedans and later expanding to SUVs like the 2005 and pickups including the 2006 Dodge Ram 1500. MDS operates by using electronic controls and specialized solenoids to redirect , which collapses the valve lifters on cylinders 1, 4, 6, and 7, preventing their and exhaust from opening and effectively shutting off to those cylinders. This transition between four-cylinder and eight-cylinder modes occurs in as little as 40 milliseconds, allowing the remaining active cylinders to handle the load with minimal perceptible change in vehicle performance or sound, thanks to integrated exhaust tuning that preserves the signature V8 rumble. The system is controlled by the 's , which monitors position, vehicle speed, and load to activate deactivation seamlessly during steady-state driving. Key benefits of MDS include up to a 20% improvement in fuel economy under light-load conditions, contributing to an estimated annual savings of 60 million gallons of fuel across equipped vehicles by 2007. It has been applied in various , , , and Ram models featuring 5.7-liter and 6.4-liter HEMI engines, such as the R/T, , and , and is also used in some heavy-duty applications, such as the Ram 2500 and 3500 with the 6.4 L HEMI engine. While praised for balancing efficiency and performance, the system has faced criticism for contributing to and lifter failures, leading many owners to disable it, and introduces additional components like deactivation solenoids and modified lifters, which can be prone to wear over time.

Overview

Definition and Purpose

The Multi-Displacement System (MDS) is Chrysler's proprietary technology for V8 , enabling seamless deactivation of four cylinders during light-load conditions to operate effectively as a four-cylinder , thereby optimizing consumption. This system integrates directly into the design, allowing it to alternate between full eight-cylinder operation for peak performance and reduced-cylinder mode for efficiency without altering the core architecture. The primary purpose of MDS is to deliver a balance of robust V8 power and enhanced fuel economy, particularly in scenarios requiring minimal , while minimizing emissions and preserving drivability. By deactivating cylinders under steady-state conditions like highway cruising, it reduces pumping losses and fuel delivery to unused cylinders, targeting up to 20% improvement in fuel economy during such operations. This approach ensures drivers experience no perceptible change in performance or smoothness during mode transitions. Variable displacement concepts originated in the 1980s with early implementations like ' V8-6-4 , which aimed to address amid oil crises but faced reliability issues due to nascent electronic controls. MDS represents a modern refinement of this idea, tailored for overhead-valve (OHV) pushrod engines such as the HEMI V8, leveraging advanced management for reliable operation.

History and Introduction

The Multi-Displacement System (MDS), a cylinder deactivation technology designed to enhance by allowing V8 engines to operate on four s during light-load conditions, was developed by Chrysler's team in the early 2000s. This innovation emerged amid escalating (CAFE) standards, which required automakers to improve fleet-wide efficiency, and surging global oil prices that began climbing significantly from onward, pressuring the industry to balance performance with economy. MDS debuted in the 2005 model year on the 5.7 L HEMI V8 engine, marking its first high-volume production application in North American vehicles with the and R/T. The system was extended to pickup trucks the following year in the 2006 Dodge Ram 1500, making Chrysler the first to offer cylinder deactivation in that segment. These initial implementations focused on integrating MDS seamlessly into the HEMI architecture to support fuel savings without compromising the engine's power delivery. Key milestones in MDS evolution included its expansion to larger-displacement HEMI variants, such as the 6.4 L engine introduced in 2011 for high-performance applications. In 2009, Chrysler integrated Variable Cam Timing (VCT)—also known as Variable Valve Timing (VVT)—with MDS on updated 5.7 L HEMI engines, enabling smoother mode transitions and broader operational efficiency. Starting around 2019, MDS was paired with the eTorque mild-hybrid system in select models for further efficiency gains. Following the 2021 formation of Stellantis, MDS continued in production HEMI engines, including the 6.4 L variant for heavy-duty applications as of 2025, with a focus on durability enhancements. The 5.7 L HEMI V8 with MDS and eTorque returned to the Ram 1500 lineup for the 2026 model year after its discontinuation in the 2025 model.

Technical Operation

Cylinder Deactivation Mechanism

The Multi-Displacement System (MDS) in Chrysler's HEMI engines employs specialized hydraulic roller lifters equipped with internal locking pins to achieve cylinder deactivation. These lifters are installed on cylinders 1, 4, 6, and 7, allowing the engine to operate in a four-cylinder mode during low-load conditions. When deactivation is initiated, multi-displacement solenoids—two per cylinder bank—direct pressurized engine oil into the lifters, forcing the locking pins to retract and collapse the lifter assembly. This collapse decouples the pushrods from the camshaft, preventing the intake and exhaust valves from opening on the targeted cylinders. Simultaneously, the electronic control module (ECM) disables fuel delivery to the injectors and cuts spark to the ignition coils of the deactivated cylinders, ensuring no occurs and avoiding potential misfires. In this state, the pistons in the deactivated cylinders continue to reciprocate, driven by the linkage to the active cylinders, effectively serving as a "prime mover" to maintain smooth rotation without active compression or expansion cycles in those chambers. The system relies on the engine's oil pressure, typically maintained between 40 and 60 psi, which is routed through the to either hold the lifter plungers extended (in eight-cylinder mode) or release them for collapse (in four-cylinder mode). Each solenoid operates at a resistance of approximately 10.3 ohms and responds to ECM signals to modulate this pressure precisely. Transitions between modes occur seamlessly in less than 40 milliseconds, enabled by the rapid response and oil flow dynamics, resulting in imperceptible shifts to the driver. This quick actuation is facilitated by the pushrod design of the HEMI engine, which positions the in the block and allows simpler lifter-based deactivation compared to overhead cam configurations that would require more complex switching mechanisms.

Control and Activation

The (PCM), serving as the central , oversees the Multi-Displacement System (MDS) by continuously monitoring key and vehicle parameters through an array of sensors to decide on activation or deactivation. These sensors include the for detecting pedal input, the manifold absolute pressure ( for assessing engine load, the vehicle speed sensor for tracking road conditions, and the engine coolant temperature sensor for ensuring optimal operating temperatures. When suitable conditions are met, the PCM issues commands to engage MDS, seamlessly transitioning the from eight-cylinder to four-cylinder operation while maintaining smooth performance. MDS activation occurs under specific steady-state conditions designed to maximize without compromising drivability, typically when engine speed is between approximately 1,000 and 3,000 RPM, input remains steady at under 20% or light load, vehicle speeds are above approximately 20 mph in steady highway cruising up to around 80 mph, and is light or absent. The system disengages rapidly—within 0.04 seconds—upon detection of increased demand, braking, or any abrupt change in load, reverting to full-cylinder operation to deliver immediate power. This logic prioritizes scenarios like highway cruising where power needs are minimal, ensuring the deactivated cylinders (1, 4, 6, and 7) do not contribute to during these periods. Four multi-displacement —two per —facilitate the mechanical execution of deactivation by pulsing at 12 volts under PCM command to redirect pressurized flow, locking or unlocking the lifters as needed. In the event of a fault, such as electrical malfunction or flow restriction, the system defaults to full eight- mode to prevent potential damage, with the PCM logging the error for diagnostics. To ensure imperceptible transitions, MDS integrates closely with the (ETC) system, which adjusts air intake, and torque management algorithms that fine-tune and fuel delivery to mask any mode shifts. In models produced after 2009, the system further incorporates (VVT) to optimize camshaft phasing during activation and deactivation, enhancing smoothness and efficiency. Diagnostic capabilities are embedded within the II (OBD-II) framework, with specific trouble codes such as P3401, P3424, P3441, and P3449 indicating circuit faults on cylinders 1, 4, 6, and 7 respectively. The PCM performs self-test routines during engine startup, cycling the solenoids to verify operation, and technicians can use scan tools to command activation for further testing, including resistance checks (typically 10.3 Ω ± 0.25 at 68°F).

Applications

Compatible Engines

The Multi-Displacement System (MDS) is integrated into select variants of Chrysler's Gen III HEMI V8 engines, enabling cylinder deactivation for improved under light loads. The primary engine featuring MDS is the 5.7 L (345 cu in) HEMI V8, introduced in and produced to the present, with MDS becoming standard on most automatic transmission-equipped models starting in 2006. This engine delivers power outputs ranging from 345 to 395 horsepower, depending on the application and tuning, while incorporating MDS-specific components such as specialized hydraulic roller lifters and deactivation solenoids in the to manage cylinder shutoff without compromising structural integrity. Its bore and stroke measure 99.5 mm x 90.9 mm, supporting a compression ratio typically around 9.6:1 in MDS-equipped versions. Another key compatible engine is the 6.4 L (392 cu in) , in production since 2011 and continuing into the present under . MDS is standard on variants, particularly in and applications, where it deactivates four cylinders during low-demand conditions. Power output varies by model, reaching 410 horsepower in heavy-duty configurations and up to 485 horsepower in SRT variants. The engine's bore and are 103.9 mm x 94.6 mm, with a forged and reinforced elements designed to accommodate MDS operation alongside higher-output demands. Certain variants and applications exclude MDS for performance or market-specific reasons. The 5.7 L HEMI Eagle economy tune, a detuned version optimized for lower emissions and fuel economy in select markets, omits MDS to simplify the and reduce costs, relying instead on alone. Similarly, some export models, particularly those paired with manual transmissions or tuned for non-U.S. regulations, lack MDS. High-performance supercharged engines like the 6.2 L Hellcat HEMI (2015-2023) do not incorporate MDS, prioritizing consistent power delivery over deactivation efficiency. As of 2025, MDS remains retained in non-hybrid V8 configurations under , including updated 5.7 L and 6.4 L variants adapted for Euro 7 emissions standards through refined fuel management and integration in markets such as , where the 2026 Ram 1500 will offer the 5.7 L HEMI eTorque with MDS. MDS is also included in eTorque mild-hybrid V8 applications for load balancing alongside electric assist.
Engine VariantDisplacementBore x Stroke (mm)Power Output (hp)MDS AvailabilityProduction Years
5.7 L HEMI V85.7 L (345 cu in)99.5 x 90.9345-395Standard on most auto variants; excluded in Eagle tune and some exports2005-present
6.4 L HEMI V86.4 L (392 cu in)103.9 x 94.6410 (trucks) to 485 (SRT)Standard on auto variants2011-present
6.2 L Hellcat Supercharged6.2 L (376 cu in)103.9 x 86.0707+ (supercharged)Not available2015-2023

Equipped Vehicles

The Multi-Displacement System (MDS) debuted in 2005 on select vehicles equipped with the 5.7-liter HEMI , marking its introduction in passenger cars and . The initial models included the , , and , all launched that year as the first high-volume production vehicles in to feature the technology. The also adopted MDS in 2005, becoming the first to incorporate cylinder deactivation for improved efficiency without compromising performance. Truck applications expanded MDS usage starting with the 2006 Ram 1500, the first pickup to offer the system standard on its 5.7-liter HEMI-equipped variants, enhancing fuel economy during light-load conditions. This extended to subsequent generations of the Ram 1500 through the present, including models with the 5.7-liter HEMI and eTorque mild-hybrid integration. The Ram 2500 and 3500 Heavy Duty trucks incorporated MDS with the 6.4-liter HEMI beginning in 2014, providing efficiency benefits for towing and highway driving; Power Wagon variants were similarly equipped to balance capability and economy. In performance vehicles, MDS appeared on and Charger SRT models starting in 2011 with the 6.4-liter HEMI, enabling seamless transitions between V8 and four-cylinder modes for everyday usability. Supercharged Hellcat variants from 2015 onward did not include MDS due to the demands of . SUV and sedan expansions included the and in 2006, followed by the Aspen in 2007, all with the 5.7-liter HEMI. The continued MDS integration across generations from 2005 onward, while the adopted it with the 6.4-liter HEMI in the 392 model starting in 2021. MDS-equipped vehicles have been predominantly available in North American markets, with applications centered on , , , and Ram brands under . The system persists in select 2025 and 2026 models like the Ram 1500 with eTorque-enhanced .

Performance Impacts

Fuel Efficiency Gains

The Multi-Displacement System (MDS) significantly enhances fuel economy in compatible engines by deactivating four cylinders under light-load conditions, with reporting improvements of up to 20% in steady-state cruising for the 2006 5.7L HEMI V8. This translates to EPA-estimated ratings of 15 city and 20 highway for MDS-equipped 2006 Dodge Ram 1500 models with the 5.7L HEMI, compared to approximately 13 city and 17 highway without the system, primarily due to reduced fuel consumption during prolonged highway travel. The gains stem from the system's ability to operate in a four-cylinder mode, effectively halving displacement from 5.7 L to 2.85 L, which minimizes pumping losses and optimizes fuel delivery without requiring additional hardware like . Real-world evaluations confirm more modest but consistent benefits, with studies on cylinder deactivation technologies showing 7-15% overall fuel economy improvements in mixed driving cycles. Highway-oriented tests yield the highest returns, often achieving 25 versus 20 in non-MDS setups, as the system sustains four-cylinder operation longer at constant speeds above 45 mph and below 65 mph. In contrast, stop-and-go urban traffic limits these gains, as frequent acceleration demands trigger repeated switches to eight-cylinder mode, reducing the time spent in efficient deactivation and resulting in only marginal savings of 5-10% under such conditions. In modern applications, MDS integrates with hybrid systems for further enhancements; for the 2025 Ram 1500 with 5.7L HEMI eTorque, it complements mild-hybrid electric assist to deliver EPA-estimated combined fuel economy of 22 mpg in 2WD configurations and up to 25 mpg highway. As of 2025, the 5.7L HEMI with MDS remains available in select Ram 1500 configurations, though is transitioning to new Hurricane inline-six engines without MDS. This synergy allows MDS to activate more seamlessly during low-demand periods, boosting overall efficiency in light-duty trucks by an additional 2-3 mpg over non-hybrid MDS variants.

Emissions and Power Trade-offs

The Multi-Displacement System (MDS) achieves emissions reductions primarily through lower fuel consumption during cylinder deactivation, resulting in up to a 7% decrease in CO2 emissions for V8 engines like the Hemi under light-load conditions. This efficiency gain supports compliance with U.S. Tier 2 Bin 5 standards, which limit to 0.07 g/mi and NMOG to 0.09 g/mi, by operating deactivated cylinders in a manner that avoids excessive rich fuel mixtures and maintains optimal air-fuel ratios in active cylinders. In terms of power delivery, MDS seamlessly transitions to full 8-cylinder operation under higher loads, restoring 100% of the engine's —such as 375 lb-ft in the 5.7 L Hemi V8—without any net loss in peak power output. However, this reactivation can introduce a slight delay during aggressive scenarios, typically on the order of milliseconds, as the engages solenoids to restore valve lift. Key trade-offs include added engine complexity from components like deactivation solenoids and modified lifters, which enable these efficiency benefits. In modern applications, MDS contributes to meeting stricter standards such as Euro 6/7 and California's LEV III by allowing leaner, more efficient operation in the 4-cylinder mode, which reduces overall hydrocarbon and CO2 outputs during steady-state cruising. Additionally, the system integrates with catalytic converters to accelerate warm-up and sustain higher exhaust temperatures, further aiding emissions control.

Advantages and Criticisms

Key Benefits

The Multi-Displacement System (MDS) provides consumers with improved , achieving up to 20% better mileage in four- mode without compromising the full V8 power output when acceleration is demanded. This seamless transition between operating modes occurs in as little as 40 milliseconds, rendering the cylinder deactivation imperceptible to the driver and allowing them to enjoy V8 performance on demand while benefiting from enhanced during steady cruising. For manufacturers, MDS supports compliance with (CAFE) standards by boosting overall fleet efficiency, helping achieve required averages such as the historical 27.5 mpg benchmark for passenger vehicles. It offers a cost-effective solution for integrating fuel-saving technology into large-displacement engines, reducing development expenses compared to alternative electrification methods. Environmentally, MDS contributes to by lowering fuel consumption through optimized engine operation. Across the broader vehicle fleet, this technology was projected to enable collective savings of over 60 million gallons of fuel annually by 2007. In terms of drivability, the four-cylinder mode in MDS operation results in quieter engine performance and lower vibration levels during highway cruising, enhanced further by complementary vehicle sound insulation for a more refined cabin experience. Economically, MDS decreases operating costs for fleet operators, such as those using , by improving in everyday scenarios and extending range without additional infrastructure needs. Additionally, vehicles equipped with MDS maintain strong resale value, bolstered by the enduring appeal of HEMI V8 branding among buyers seeking a balance of power and efficiency.

Reliability Issues and Modifications

One prevalent reliability concern with the Multi-Displacement System (MDS) in Chrysler HEMI engines involves lifter collapse failures, particularly in 2009-2014 models, where insufficient oil pressure during deactivation mode leads to oil starvation in the MDS-specific lifters, resulting in collapsed lifters and bent pushrods. This issue arises because the MDS solenoids direct oil flow to lock the lifters in a collapsed state, but blockages or low pressure can prevent proper lubrication, causing mechanical stress on the valvetrain components. Additionally, transitions between four- and eight-cylinder modes often produce noticeable vibrations and harshness, leading to owner dissatisfaction due to uneven engine operation and perceived roughness during low-load cruising. MDS solenoid failures have prompted service repairs; for example, reports indicate issues in 2014-2016 causing misfires or deactivation errors, requiring replacement of the affected components under the manifold. In response to debris buildup in oil passages contributing to lifter issues, 2021 updates incorporated improved oil flow designs in the to reduce accumulation and enhance lubrication during MDS operation. Ongoing lawsuits have been filed against regarding HEMI lifter failures in models from 2009 onward. To address these concerns, many owners opt for aftermarket modifications to disable MDS. Electronic solutions, such as DiabloSport inTune i3 tuners, reprogram the engine control module (ECM) to prevent cylinder deactivation, eliminating transition vibrations and potential lifter stress without mechanical alterations. Mechanical disables, including MDS delete plugs or lifter block-off kits from , physically seal the oil galleries and replace MDS lifters with standard non-deactivating units, typically costing $200-500 for parts alone. Stage 1 MDS delete kits commonly include Hellcat-style non-MDS lifters, MDS plugs to block oil passages, and may require upgraded pushrods and valve springs depending on the camshaft selected; however, many Stage 1 camshafts are compatible with stock valve springs provided the lift specifications are confirmed to be within safe limits, such as under 0.600 inches. Proper maintenance is crucial for MDS longevity, with recommending 5W-20 full to ensure adequate flow through the specialized lifters, and changes every 6,000 miles under severe duty conditions to prevent viscosity-related pressure drops. Regular diagnostic scans for error codes, such as P3401-P3405 related to performance, are advised to catch issues early. problems in high-mileage HEMI engines are a reported concern, often linked to cumulative wear from oil degradation. In June 2025, announced an extension of the powertrain to 10 years or 100,000 miles for 2026 , applicable to original owners and covering general components including those in HEMI engines.

Comparisons

Similar Systems in Other Manufacturers

General Motors introduced Active Fuel Management (AFM) in 2005 on its pushrod V8 engines, such as the and LT families, where the system deactivates four cylinders under light-load conditions by using solenoids to collapse the hydraulic lifters, effectively switching from V8 to V4 operation for improved . This technology relies on engine control software to monitor throttle position, vehicle speed, and load to seamlessly transition modes without driver intervention. In 2019, GM advanced this with Dynamic Fuel Management (DFM) on select V8 engines, expanding flexibility by allowing deactivation of any combination of cylinders—up to seven—across 17 distinct firing patterns to minimize vibrations and optimize efficiency during varied driving scenarios. Ford implemented technology through cylinder deactivation in its 1.0-liter three-cylinder EcoBoost engine starting in 2017, primarily for European models, where two cylinders deactivate under low-load cruising to reduce fuel consumption by up to 4-5% while maintaining smooth operation via advanced valve train control. By 2021, Ford extended this to its 5.0-liter V8 in the F-150 truck, incorporating to deactivate four cylinders during steady-state driving, contributing to EPA-estimated improvements in highway fuel economy without sacrificing peak power output. Unlike full valve shutoff, Ford's approach integrates with twin independent (Ti-VCT) to modulate airflow and enhance responsiveness across operating ranges. Honda's (VCM) debuted in 2005 on its J-series 3.5-liter V6 engines, deactivating the rear bank of three cylinders during moderate acceleration and steady cruising (typically 30-70 mph) by locking the intake and exhaust rockers, transitioning the engine from six- to three-cylinder mode for up to 10% better fuel economy in sedan applications like the Accord and . The system uses hydraulic actuators controlled by the engine's ECU to ensure balanced firing orders and minimal (NVH) during deactivation, with reactivation occurring rapidly under increased throttle demand. While Nissan did not implement partial cylinder deactivation in its VQ-series V6 engines under the Direct Injection Gasoline (DIG) branding, the company focused on related efficiency technologies like (VVEL) in other powertrains, which adjusts valve lift profiles for partial load optimization rather than full shutoff. European manufacturers, exemplified by BMW's system introduced in on inline-six engines, prioritize continuous variable intake valve lift over discrete cylinder deactivation; this throttleless design varies lift from 0.3 mm to 9.9 mm to precisely control air intake and reduce pumping losses, achieving up to 10% fuel savings in city driving without altering displacement. Cylinder deactivation technologies proliferated across the in the 2000s as manufacturers sought to meet stringent fuel economy and emissions regulations, such as CAFE standards, without resorting to engine downsizing that could compromise performance. By the , adoption expanded to V6 and V8 configurations from multiple OEMs, with global market growth projected at 6.8% CAGR through 2030, driven by applications in passenger cars and light trucks. However, the rise of electric vehicles post-2020 has diminished the long-term emphasis on such enhancements, as EV adoption—reaching over 10 million global stock by 2020—shifts focus toward for superior efficiency gains, potentially capping further ICE variable displacement innovations.

Unique Aspects of MDS

The Multi-Displacement System (MDS) in Chrysler's HEMI engines is optimized for the engine's distinctive deep-skirt cast-iron block design, which features extended side skirts and cross-bolted caps for enhanced rigidity and oil containment under high loads. This architecture allows MDS to employ specialized pushrod-operated deactivating lifters without the oiling challenges seen in some older systems from competitors, such as GM's early AFM implementations that suffered from issues like PCV-induced oil suction and lifter clogging due to inadequate management in non-deep-skirt blocks. As a result, MDS supports higher compression ratios—reaching 10.5:1 in post-2008 5.7L HEMI variants during both full and deactivated operation—enabling improved without compromising deactivation reliability. A core unique element of MDS is its binary operational mode, which strictly alternates between full 8-cylinder and 4-cylinder (deactivating cylinders 1, 4, 6, and 7) configurations based on demand, rather than employing multi-pattern firing like GM's Dynamic Management with its 17 variable cylinder combinations. This simplicity minimizes software complexity and calibration needs, though it sacrifices finer load-matching granularity, prioritizing seamless transitions that occur in as little as 40 milliseconds via oil-pressure-actuated lifter collapse. The system complements the HEMI's hemispherical chambers and cross-flow layout by maintaining balanced firing orders in 4-cylinder mode, avoiding the need for auxiliary components like dual fuel injectors required in some rival variable-displacement setups, such as Ford's VDE systems. MDS is strategically positioned for and applications, where it emphasizes rapid reactivation under sudden loads—such as hill climbs or trailer acceleration—to deliver uninterrupted V8 without perceptible hesitation, aligning with the HEMI's 345-395 horsepower output in heavy-duty vehicles like the Ram 1500. On highways, deactivation can engage for up to 80% of cruising time at steady speeds between 40-80 mph under light , maximizing gains of around 20% without frequent interruptions typical in sedan-focused systems. In terms of evolution, MDS has seen fewer major revisions since its 2005 debut compared to competitors' iterative overhauls, with updates primarily enhancing lifter durability and integration with rather than overhauling the core deactivation logic. This conservative approach underscores a philosophy of long-term robustness, targeting 250,000-mile engine lifespans in fleet and scenarios, in contrast to Ford's pivot toward hybrid powertrains like the F-150 PowerBoost for efficiency in similar markets.

References

  1. https://media.stellantisnorthamerica.com/newsrelease.do?id=1562&mid=287
  2. https://www.pembrokechrysler.com/what-is-chrysler-mds/
  3. https://help.summitracing.com/knowledgebase/article/SR-05428/en-us
  4. https://lemonlawexperts.com/chrysler-6-4-hemi-problems/
  5. https://www.hemmings.com/stories/cadillac-v-8-6-4/
  6. https://media.stellantisnorthamerica.com/newsrelease.do?id=521&mid=
  7. https://www.eia.gov/todayinenergy/detail.php?id=7390
  8. https://www.allpar.com/threads/chrysler-engineer-burke-brown-on-the-hemi-and-multiple-displacement-v8s.237011/
  9. https://media.stellantisnorthamerica.com/newsrelease.do?id=519&fIId=735&mid=29
  10. https://media.stellantisnorthamerica.com/newsrelease.do?id=521&fIId=1562&mid=
  11. https://www.dodgegarage.com/news/article/how-to/2020/10/gen-iii-hemi-engine-quick-reference-guide-part-iv
  12. https://www.holley.com/blog/post/everything_you_wanted_to_know_about_gen_iii_hemi_engines/
  13. https://www.media.stellantis.com/em-en/ram/press/the-legend-returns-2026-ram-1500-offers-5-7-liter-hemi-v-8-etorque-engine-with-proven-performance-and-capability
  14. https://www.carscoops.com/2025/06/its-got-a-hemi-5-7-liter-v8-returns-in-2026-ram-1500/
  15. https://www.sae.org/publications/technical-papers/content/2004-01-2106/
  16. https://old.autonerdz.com/yabbfiles/Attachments/MDS.pdf
  17. https://www.ramforumz.com/threads/mds.173401/
  18. https://www.hotrod.com/how-to/chrysler-5-7l-hemi-mds-lifters
  19. https://www.chargerforums.com/threads/mds-when-does-it-activate.73229/
  20. https://www.300cforumz.com/threads/mds-cruise-speeds.86948/
  21. https://www.ramforumz.com/threads/to-mds-or-not-mds.263447/page-2
  22. https://www.carparts.com/blog/p3401-code-cylinder-1-deactivation-intake-valve-control-circuit-open/
  23. https://www.enginebuildermag.com/2019/08/unlocking-the-mysteries-of-the-5-7l-gen-iii-hemi/
  24. https://www.egrperformance.com/blogs/news/5-7-hemi-engine-guide
  25. https://www.onallcylinders.com/2021/02/01/mopar-chrysler-gen-iii-5-7l-hemi-engine-guide-bore-stroke-cylinder-heads-cam-specs-more/
  26. https://www.treadmagazine.com/features/feeding-the-beast/
  27. https://www.hotcars.com/6-4-hemi-v8-engine-comparison-cars-vs-trucks/
  28. https://over-drive-magazine.com/2023/01/12/2005-2023-chrysler-hemi/
  29. https://www.lillistonchryslerdodgejeep.com/new-Millville-2026-RAM-1500-Big%2BHornLone%2BStar%2B57%2BHemi-1C6SRFFT5TN212815
  30. https://www.motortrend.com/news/news041223hemi
  31. https://media.stellantisnorthamerica.com/newsrelease.do?id=1213&mid=
  32. https://www.riveroakscdjr.com/jeep-wrangler-engine-options.htm
  33. https://media.stellantis.com/em-en/ram/press/the-legend-returns-2026-ram-1500-offers-5-7-liter-hemi-v-8-etorque-engine-with-proven-performance-and-capability
  34. https://media.stellantisnorthamerica.com/newsrelease.do?id=5011&mid=97
  35. https://www.allpar.com/threads/2005-ram-hemi-gas-mileage.161859/
  36. https://www.mdpi.com/1996-1073/11/11/3084
  37. https://www.worktruckonline.com/40940/how-to-maximize-mpg-with-mds
  38. https://www.ramtrucks.com/towing/engine-performance/2025/ram-1500-4x2.html
  39. https://5thgenrams.com/epa-releases-official-mpg-numbers-for-2025-ram-1500/
  40. https://nap.edu/21744
  41. https://dieselnet.com/standards/us/ld_t2.php
  42. https://www.friscochryslerjeepdodgeram.com/ram-1500-hemi-engine/
  43. https://ww2.arb.ca.gov/our-work/programs/advanced-clean-cars-program/low-emission-vehicle-lev-iii-program
  44. https://dieselnet.com/tech/engine_thermal-management_cda.php
  45. https://dieselnet.com/standards/us/fe.php
  46. https://newparts.com/blog/392-hemi-6-4-liter-engine-mds-failure-issues
  47. https://www.jeepgarage.org/threads/fca-class-action-law-suit-hemi-5-7-and-6-4-engines-lifters-valves-etc-any-main-eng-failures.241680/
  48. https://sdparts.com/i-24527976-sdpc-mds-delete-kit-for-5-7l-gen-iii-hemi-2009.html
  49. https://www.texas-speed.com/p-18934-hemi-57l-mds-delete-kit-w-camshaft-for-2009-2018-models.aspx
  50. https://www.ramforumz.com/threads/engine-oil-grade-5w20-or-5w30.119368/
  51. https://www.cnbc.com/2025/06/18/ram-pickup-truck-warranty.html
  52. https://gmauthority.com/blog/gm/general-motors-technology/general-motors-propulsion-technology/general-motors-active-fuel-management-cylinder-deactivation-technology/
  53. https://www.hagerty.com/media/archived/gm-pioneered-cylinder-deactivation/
  54. https://www.sae.org/papers/active-fuel-management-technology-hardware-development-a-2007-gm-39l-v-6-ohv-si-engine-2007-01-1292
  55. https://www.driveperry.com/2019-silverado-leads-industry-with-498940/
  56. https://gm-techlink.com/wp-content/uploads/2018/09/GM_TechLink_16_Mid-August_2018.pdf
  57. https://media.ford.com/content/fordmedia/feu/en/news/2016/11/29/ford-to-offer-fuel-saving-cylinder-deactivation-tech-for-1-0-lit.html
  58. https://pickuptrucktalk.com/2020/10/2021-ford-f150-5-0l-v8-engine/
  59. https://www.ford.com/powertrains/ecoboost/
  60. https://www.hondainfocenter.com/Terms-and-Technologies/_content/Terms-and-Technologies/Variable-Cylinder-Management-VCM-V-6-Engines/
  61. https://www.economyhonda.com/blog/2014/november/5/hondas-vcm-tech-explained.htm
  62. https://www.caranddriver.com/news/a15353612/timing-changes-how-hondas-vtec-variable-timing-system-works/
  63. https://www.caranddriver.com/news/a15341425/variable-valve-timing-explained-an-appreciation-of-how-quickly-engines-operate/
  64. https://www.caranddriver.com/reviews/a15149006/bmw-745i-first-drive-review/
  65. https://autoedu.com/cylinder-deactivation-old-technology-new-efficiency/
  66. https://www.wardsauto.com/news/archive-wards-active-in-deactivation/769530/
  67. https://www.grandviewresearch.com/industry-analysis/cylinder-deactivation-system-market-report
  68. https://www.iea.org/reports/global-ev-outlook-2021/trends-and-developments-in-electric-vehicle-markets
  69. https://www.marketreportanalytics.com/reports/automotive-variable-displacement-engine-125399
  70. https://www.gm-trucks.com/forums/topic/192384-2016-53l-afm-problems-fixed/
  71. https://boostafmdisabler.com/blogs/news/afm-vs-dfm
  72. https://www.wardsauto.com/news/archive-wards-chrysler-hemi-continues-to-evolve/773544/
Add your contribution
Related Hubs
User Avatar
No comments yet.