Hubbry Logo
PTM-3 minePTM-3 mineMain
Open search
PTM-3 mine
Community hub
PTM-3 mine
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
PTM-3 mine
PTM-3 mine
PTM-3 mine
View on Wikipedia
from Wikipedia
PTM-3

The PTM-3 (Russian: ПТМ-3: ПротивоТанковая Мина-3) is a Soviet scatterable self-liquidating shaped charge anti-tank mine.[1][2] The mine's case is made up of a stamped steel body with notches in its side. The notches allow the mine to produce a shaped charge effect on five sides - 4 on the sides, and one on the end face.[3] The mine has two arming stages - pyrotechnic and mechanical, and has a magnetic influence battery-powered fuze BT-06 (Russian: БТ-06).[1][2][3] The mine can be delivered using the BM-30 Smerch (9M55K4), BM-27 Uragan (9M59), BM-21 Grad (9M22K) MLRS,[2] helicopter-mounted minelaying system VSM-1, remote mining machine UMZ (Russian: УМЗ) or portable mining kit PKM (Russian: ПКМ: Переносной Комплект Минирования).[3] It cannot be placed manually, and must only be placed using remote minelaying systems.[1] The mine was introduced in 1951.[4]

Action

[edit]

The mine can be deployed on soil with various minelaying systems utilizing KPTM-3 cassettes - each containing one PTM-3 mine.[1][3] A rope is attached to the body of the cassette and the pin of the mine. Once the cassette bursts, the rope pulls on the pin of the mine, completing the mechanical stage of arming.[1] They can also be deployed by drones.[5]

When on the ground, upon the burnout time of the pyrotechnic moderator has elapsed, the fuze moves into "combat position". The arming process generally takes 60 seconds after the trigger of the thermal sensor.[1][2][6]

When an armored vehicle drives over the mine, due to fluctuations in the magnetic field, the mine is triggered. The created shaped charges as a result of the explosion penetrate the tank, and kill the crew inside or damage the tank systems.[1]

Due to its high sensitivity to changes in the magnetic field, the mine may be triggered by individuals, along with vehicles. If no target has been detected, the mine self-destructs after the completion of the self-liquidation period.[1]

Destruction

[edit]

Installed PTM-3 mines cannot be removed by dislocation. The mines self-destruct 16–24 hours after deployment. If a mine has not self-destructed upon the completion of the set self-liquidation timeframe, it is destroyed using a remotely-triggered explosive charge weighing 0.2-0.4 kg placed next to the mine. It is prohibited to destroy the PTM-3 mines before the self-liquidation period has elapsed, as the placement of the explosive charge could trigger the mine. If the mine must absolutely be removed before the self-liquidation period has elapsed, it can be destroyed by machine gun fire, preferably mounted on an armored vehicle.[1]

Specifications

[edit]
  • Mass[1][2]
    • Charge: 1.8 kg of TG-40 (60/40 RDX/TNT)
    • Deployed: 4.9 kg
    • Full assembly: 8.5 kg
  • Dimensions (mm):[1][2] 330x84x84
  • Self-liquidation time (h):[1][2] 16-24 (depends on weather conditions)
  • Temperature range of use (°С):[1] -40 to +50
  • Shelf life:[1] 10 years

See also

[edit]

Notes

[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

PTM-3 mine

View on Grokipedia
from Grokipedia
The PTM-3 (Russian: ПТМ-3, ПротивоТанковая Мина-3) is a Soviet-designed, scatterable equipped with a Misnay-Schardin linear shaped-charge and a magnetic influence , intended to penetrate armored vehicles from multiple angles via concave explosive surfaces on its sides and bottom. The mine features a rectangular, olive-drab body with black markings (and a red stripe on training variants), weighs 4.9 kg, contains up to 1.8 kg of high explosive, and measures 330 mm in length, 88 mm in width, and 88 mm in height. Developed during the Soviet era as a versatile anti-vehicle weapon, the PTM-3 incorporates the VT-06 system with a battery-powered magnetic sensitive to ferrous metal masses or human interference, along with an anti-handling mechanism to prevent tampering. It arms 60–100 seconds after deployment and self-destructs after 8–24 hours to limit long-term hazards, though failures can leave duds. Deployment options include manual placement, vehicle-mounted minelayers like the UMZ (up to 180 mines), rockets (e.g., 3 per 122 mm 9M22K ), dispersal, and aerial cassettes such as the BKF block (holding 12 mines) released from aircraft containers like the . In recent conflicts, including the Russia-Ukraine war since , Russian forces have employed the PTM-3 extensively, including innovative adaptations like drone delivery via Lancet and Shahed/Geran-2 UAVs to scatter mines over Ukrainian positions.

History and Development

Origins and Design

The PTM-3 mine originated in the during the late 1940s, as part of broader efforts to address post- advancements in , where rapid deployment of anti-tank defenses became critical against increasingly mobile and heavily protected enemy vehicles. This development reflected the Soviet military's focus on enhancing battlefield denial capabilities through innovative explosive ordnance, building on experiences with shaped charges from . The mine was designed to counter tanks effectively without requiring manual placement, prioritizing scalability in defensive operations during the early era. A key innovation in the PTM-3's design was the application of the Misnay-Schardin linear shaped-charge effect, a detonation principle that propels explosive energy to form penetrating jets, enabling multi-directional armor penetration from five sides of the mine body—four lateral sides and the bottom face. This effect, originally conceptualized in the 1940s by Hungarian and German scientists, was adapted by Soviet engineers to maximize lethality against approaching vehicles from various angles, distinguishing the PTM-3 from earlier blast-focused anti-tank mines like the TM-series. The mine's rectangular plastic body incorporated strategic notches along its edges to channel and focus the explosive energy, optimizing the shaped charge performance without complex internal liners. The design emphasized scatterability to facilitate non-manual deployment, allowing the creation of instant minefields over large areas to disrupt armored advances. This was achieved through compatibility with remote delivery systems, such as platforms, which could disperse multiple mines aerially or via projectiles for tactical surprise. Introduced into Soviet service in 1951, the PTM-3 represented a significant in scatterable anti-vehicle munitions under Soviet programs aimed at integrating ordnance with mechanized forces.

Production and Introduction

The PTM-3 mine was officially introduced into Soviet service in as a key component of anti-tank obstacle creation strategies designed to rapidly deny armored advances in defensive operations. Following its introduction, the PTM-3 was mass-produced in Soviet military-industrial facilities throughout the and beyond, enabling widespread integration into the Red Army's arsenal and export to allies. Production emphasized the mine's scatterable design for compatibility with existing delivery systems, such as including the multiple launch rocket system, which could deploy clusters of PTM-3 mines over large areas to create instant barriers. Early adoption during the involved testing in Soviet military exercises to simulate rapid minelaying against potential incursions, alongside extensive stockpiling to support contingency plans for European theater conflicts. These efforts underscored the mine's role in enhancing defensive depth without requiring manual placement. The PTM-3 incorporated a mechanism from its original design, activating 16 to 24 hours after deployment to limit long-term hazards in temporary minefields, in line with protocols for explosive remnants of war.

Technical Design

Physical Construction

The PTM-3 mine body is constructed from , providing low detectability for scatterable deployment, and features a protective olive-drab for environmental resistance and in field conditions. The rectangular measures 330 mm in length, 88 mm in width, and 88 mm in height, allowing for compact storage in delivery systems while maintaining structural integrity. A key structural element is the notched configuration on five sides—four lateral faces and the bottom—which creates concave surfaces to enhance the mine's effect, directing explosive force upward or sideways against vehicle undercarriages or hulls upon . The deployed mine weighs 4.9 kg, balancing portability with sufficient for stability on various terrains. This construction enables reliable performance across a wide operational temperature range of -50°C to +50°C, ensuring functionality in extreme climates without compromising the body's integrity.

Fuze and Components

The PTM-3 mine employs the VT-06 magnetic influence fuze, a battery-powered system designed to detect disturbances in the Earth's magnetic field caused by the passage of ferrous vehicles or nearby metallic objects. This fuze features a sensor assembly that monitors magnetic flux changes, triggering detonation when a predefined threshold is exceeded, typically from targets within a 1-2 meter radius. The VT-06 includes a side-mounted battery well for power supply and an integrated delay mechanism to prevent premature activation during deployment, along with an anti-extraction anti-handling device sensitive to movement or inclination. At the core of the mine's destructive capability is its main explosive charge, consisting of 1.8 kg of TG-40, a high-explosive mixture of 60% and 40% TNT optimized for applications. This charge is augmented by an booster to ensure reliable initiation and uniform detonation propagation. The explosive assembly utilizes a Misnay-Schardin linear configuration, with concave liners positioned on the sides and bottom to focus the blast energy into a high-velocity jet for armor penetration. Arming relies on internal pyrotechnic and mechanical delay systems that activate sequentially upon mine deployment. Pyrotechnic charges ignite immediately after ejection from a carrier, providing an initial and chemical delay of 60–100 seconds to stabilize the mine before the mechanical safing pins release. These systems connect the VT-06 directly to via electrical leads, which interface with the booster charge; upon magnetic detection, the signals to fire, initiating the booster and subsequently collapsing the liner to direct the TG-40 outward in a focused manner. This integration ensures precise timing and directional effect, minimizing scatter while maximizing target impact.

Deployment and Arming

Delivery Methods

The PTM-3 mine can also be deployed manually by hand placement for controlled positioning in defensive setups. The PTM-3 mine is primarily deployed via KPTM-3 cassettes launched from multiple launch systems (MLRS), enabling remote scattering over targeted areas. These cassettes, each containing one PTM-3 mine, are integrated into cluster warheads such as the 9M55K4 for the (which deploys approximately 25 mines per ), the 9M59 for the (deploying 9 mines per ), and variants like the 9M22K for the (deploying 3 mines per ). This method allows for rapid creation of minefields at ranges exceeding 20 kilometers, depending on the system. Vehicle-mounted dispensers provide ground-based deployment options for the PTM-3, facilitating controlled scattering during mobile operations. Systems such as the VSM-1 vehicle dispenser, UMZ multi-purpose minelayer (capable of carrying up to 180 mines), and PKM portable launcher use KPTM-3 cassettes to eject mines across designated paths or zones. These platforms enable tactical flexibility, dispersing mines from moving vehicles without requiring personnel to exit. Aerial delivery methods expand the PTM-3's reach, including dispersal using adapted KPTM-3 cassettes for low-altitude scattering and aerial cassettes such as the BKF block (holding 12 mines) released from containers like the . In modern adaptations since 2022, unmanned aerial vehicles (UAVs) such as the loitering munition and Shahed/Geran-2 drones have been modified to carry and release PTM-3 mines via underwing KPTM cassettes, each holding one mine for precision drops along flight paths. In all delivery methods, the PTM-3 mines are ejected from cassettes using small charges, resulting in a scatter pattern that covers areas up to several hundred meters wide and creates instant, non-patterned minefields without manual placement. This dispersion relies on the velocity and altitude of deployment to ensure broad coverage while minimizing clustering.

Arming Sequence

The arming sequence of the PTM-3 mine commences immediately upon ejection from its carrier cassette, such as the KPTM-3 or rocket dispensers, ensuring the device remains inert during scatter to avoid hazards to deploying forces. A mechanical stage initiates as a , attached to the cassette, pulls out the arming pin during launch, releasing internal safety mechanisms and allowing subsequent pyrotechnic processes to engage. This two-stage design—pyrotechnic and mechanical—provides a deliberate delay, typically lasting 20–40 seconds, during which the mine stabilizes on the ground after impact. Following ejection, the pyrotechnic stage activates through a series of charges or a moderator that burns out post-landing, transitioning the BT-06 (or VT-06) magnetic influence fuze from a safe, dormant state to an initialized configuration. Stabilization occurs as the mine orients itself, with its facing upward, aided by the deceleration from the burning that prevent premature activation. Once the delay completes, the battery-powered fully arms, enabling active magnetic sensing mode to detect disturbances in the caused by nearby metallic targets. Throughout this period, the mine is non-functional and safe to handle if undisturbed, incorporating redundancies to mitigate risks from scatter patterns. Several factors can influence the arming sequence's reliability, including terrain impact upon landing, which may affect orientation and stabilization, and environmental conditions such as temperature or moisture that could alter pyrotechnic burn rates within operational limits. These elements ensure the delay window accommodates typical deployment scenarios, from aerial rocket delivery to ground-based scattering, while maintaining safety by delaying full operational status until the mine has settled.

Operation and Effects

Detection and Detonation

The PTM-3 mine utilizes a battery-powered for target detection, which senses disturbances in the caused by large masses, such as armored vehicles. This activates when a vehicle passes nearby or over the mine, selectively triggering on significant metallic signatures while disregarding non-ferrous materials, small metallic objects, or personnel to minimize false activations. The fuze's sensitivity is calibrated specifically for the magnetic profile of tracked or wheeled military vehicles, ensuring high reliability against intended targets with low inadvertent detonation rates from non-threats like . Upon detection, the VT-06 fuze sends an electrical signal to initiate the mine's main explosive charge of 1.8 kg TG-40. This detonation forms a high-velocity copper jet from one of the mine's multiple liners, optimized for underbelly or side penetration using the Misnay-Schardin linear shaped-charge effect. The PTM-3's rectangular construction incorporates shaped charge effects across five sides—four lateral faces and the base—enabling multi-directional detonation regardless of the mine's landing orientation or the target's approach angle from above or the sides. This design ensures the upward- or target-facing liner directs the jet effectively, with penetration capability of approximately 80 mm of rolled homogeneous armor.

Lethal Capabilities

The PTM-3 mine is primarily designed as an anti-tank weapon, utilizing a to target the vulnerable undercarriage or tracks of armored vehicles. Upon detonation, the mine's 1.8 kg of TG-40 explosive generates a high-velocity metal jet from its liner, capable of penetrating approximately 80 mm of rolled homogeneous armor, which is sufficient to cause mobility kills or catastrophic damage to vehicles weighing 20-40 tons, such as main battle tanks or fighting vehicles. In addition to its primary anti-armor role, the PTM-3 produces secondary blast and fragmentation effects that pose hazards to nearby or light vehicles. The directed upward blast from the , combined with fragmentation from the mine's casing, creates a lethal zone effective against unarmored or lightly protected targets in close proximity. When deployed in scatterable configurations via , rockets, or , the PTM-3 enables the rapid creation of dense minefields for area denial, with deployment systems capable of distributing up to hundreds of mines over a 100 m × 100 m area to impede armored advances. This high-density scattering enhances its tactical effectiveness in denying terrain to enemy forces. Despite its potency, the PTM-3 has limitations in its lethal capabilities; its magnetic influence reduces effectiveness against non-ferrous vehicles lacking significant metallic mass for detection. Additionally, it is less optimal against heavily spaced or composite armor configurations that can disrupt the jet, and the mine lacks dedicated anti-personnel features, prioritizing vehicle threats over dismounted .

Countermeasures and Limitations

Self-Destruction Mechanism

The PTM-3 mine incorporates a timed feature designed to activate 8 to 24 hours after arming, ensuring the device becomes inert if no target is detected during its operational period. This mechanism relies on the battery-powered VT-06 magnetic influence , which integrates a pyrotechnic time-delay element to initiate the self-destruction sequence. Upon expiration of the delay, the triggers an internal self-liquidation that renders the mine non-functional, typically through a controlled of the explosive fill rather than a full high-order , thereby minimizing blast effects while preventing reuse or accidental triggering. The VT-06 's delay assembly powers this function to comply with doctrines for temporary minefields. This self-destruct capability primarily serves to reduce long-term hazards, aligning with international efforts to limit persistent threats from scatterable mines in post-conflict environments. The timing varies with environmental factors such as (8-24 hours range), though field assessments indicate high theoretical reliability in activating as intended; however, the VT-06 has reported unreliability, leading to duds and failed self-destructs in some cases.

Neutralization Techniques

The PTM-3 mine cannot be manually neutralized or disarmed owing to its integrated pyrotechnic arming sequence and battery-powered magnetic influence , which renders direct handling extremely hazardous. Instead, active countermeasures emphasize remote methods to minimize risk to personnel, including the use of substantial donor explosive charges for destruction or sustained fire from a safe distance, preferably mounted on an armored vehicle, to fragment the mine before or after its period. Robotic systems are employed for clearing scatterfields, allowing for mechanical probing and removal in areas where manual explosive ordnance disposal (EOD) is impractical. Detection of the PTM-3 presents significant challenges due to its low-metal construction, which includes primarily components with minimal elements in the , rendering standard metal detectors largely ineffective. operations therefore rely on scanners to identify distortions in the caused by the mine's , supplemented by visual identification in open terrain or for subsurface confirmation. Following activation of the mechanism, which occurs 8-24 hours after deployment if no target is detected, any surviving remnants or require targeted disposal to eliminate residual hazards. Post-self-destruct handling typically involves a 0.2-0.4 kg charge placed remotely to fragment the debris or prolonged to ensure complete destruction, preventing secondary risks from disturbed components. In modern conflict contexts, particularly where PTM-3 mines are dispersed via drones or rocket systems, neutralization efforts are complicated by unpredictable scatter patterns over large areas, necessitating comprehensive area-wide sweeps rather than targeted manual EOD. These dispersed fields increase the operational footprint and demand integrated approaches combining and mechanized clearance to achieve safe .

References

  1. https://cat-uxo.com/explosive-hazards/landmines/ptm-3-landmine
  2. https://www.clusterconvention.org/files/resources/Annex-B-ENG-Outline-technical-data.pdf
  3. https://www.hrw.org/news/2023/06/13/landmine-use-ukraine
  4. https://militarnyi.com/en/news/russia-equips-lancet-drone-with-ptm-3-mine/
  5. https://www.milmag.pl/en/russia-deploys-geran-shahed-drones-armed-with-anti-tank-mines/
  6. https://milmag.pl/en/russia-deploys-geran-shahed-drones-armed-with-anti-tank-mines/
  7. https://odin.tradoc.army.mil/WEG/Asset/2d1dffeab35fc704d693a6e4e781a906
  8. https://www.jmu.edu/cisr/research/munitions-guide.shtml
  9. https://www.gichd.org/fileadmin/uploads/gichd/Publications/GICHD_Ukraine_Guide_2022_Second_Edition_web.pdf
  10. https://militarnyi.com/en/news/shahed-drone-equipped-with-ptm-3-anti-tank-mines-shot-down-over-sumy-region/
  11. https://en.missilery.info/missile/smerch/9m527
  12. https://www.gichd.org/fileadmin/user_upload/Explosive_Ordnance_Guide_for_Ukraine__GICHD___Third_Edition.pdf
  13. https://oe.tradoc.army.mil/product/russia-fields-the-zemledeliye-engineering-system-for-remote-mining/
  14. https://cat-uxo.com/explosive-hazards/rockets/122mm-9m22k-grad-rocket
  15. https://www.armedconflicts.com/PTM-3-t284382
  16. https://www.globalsecurity.org/military/library/policy/army/fm/3-34-2/appb.htm
  17. https://www.scribd.com/document/809410084/Instant-Obstacles-Russian-Remotely-Delivered-Mines
  18. https://www.forbes.com/sites/davidhambling/2025/08/15/russian-shaheds-sow-ukrainian-roads-with-anti-tank-mines-as-they-go/
  19. https://www.twz.com/air/russias-shahed-long-range-drones-are-now-dropping-anti-tank-mines
  20. https://www.gichd.org/fileadmin/uploads/gichd/Publications/GICHD_Explosive_Ordnance_Guide_for_Ukraine_2022_v18.pdf
  21. https://www.kyivpost.com/post/43317
  22. https://armyrecognition.com/archives/archives-land-defense/land-defense-2024/new-russian-impulse-kptm-ugv-can-scatter-up-to-120-anti-tank-and-anti-personnel-mines
  23. https://www.fenixinsight.com/blog/bulletins/holder-for-trap-electronic-fuze-with-ptm-3
  24. https://en.defence-ua.com/news/ukrainian_sappers_neutralize_russian_shahed_drone_loaded_with_the_ptm_3_anti_tank_mines_in_sumy_region_video-16432.html
Add your contribution
Related Hubs
User Avatar
No comments yet.