Hubbry Logo
Strontium hexaborideStrontium hexaborideMain
Open search
Strontium hexaboride
Community hub
Strontium hexaboride
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Strontium hexaboride
from Wikipedia
Strontium boride
Strontium boride
Strontium boride
Names
Other names
strontium hexaboride
Identifiers
3D model (JSmol)
ECHA InfoCard 100.031.778 Edit this at Wikidata
EC Number
  • 234-969-8
  • Key: PEZUPXKCGOMWMS-UHFFFAOYSA-N
  • InChI=1S/6B.Sr
  • [B].[B].[B].[B].[B].[B].[Sr]
Properties
SrB6
Molar mass 152.49 g/mol
Appearance black crystalline powder
Density 3.39 g/cm3, solid (15.0°C)
Melting point 2,235 °C (4,055 °F; 2,508 K)
insoluble
Structure
Cubic
Pm3m ; Oh
Hazards
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 1: Exposure would cause irritation but only minor residual injury. E.g. turpentineFlammability 0: Will not burn. E.g. waterInstability 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
1
0
0
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

Strontium boride (SrB6) is an inorganic compound. At room temperature, it appears as a crystalline black powder.[1] Closer examination reveals slightly translucent dark red crystals capable of scratching quartz.[2] It is very stable and has a high melting point and density. Although not thought to be toxic, it is an irritant to the skin, eyes, and respiratory tract.[1]

Magnetism

[edit]

Strontium boride, along with other alkali-earth metal borides, has been shown to exhibit weak ferromagnetism at low temperatures.[3] This is thought by some to be caused by slight impurities or aberrations in the crystal lattice,[4][5] while others suggest different explanations are needed.[6] Strontium boride has also been examined for semiconducting properties at lower temperatures.[7]

Preparation

[edit]

In his book The Electric Furnace, Henri Moissan describes an early synthesis of strontium boride by mixing strontium borate, aluminum, and carbon in an electric furnace.[2] Alternatively, a solid-phase synthesis of strontium boride can be carried out by reacting two moles of strontium carbonate with three moles of boron carbide and one mole of carbon inside a vacuum furnace.[8]

Uses

[edit]

Strontium boride is used in insulation and nuclear control rods.[8] A recent patent filed for aircraft windows uses SrB6 nanoparticles in a transparent acrylic sheet. The IR-absorbing properties of these nanoparticles prevents the transmittance of infrared wavelengths while still allowing the transmittance of visible light.[9]

References

[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia
Add your contribution
Related Hubs
User Avatar
No comments yet.