Community hub
Recent from talks
Knowledge base stats:
Talk channels stats:
Members stats:
Vehicle infrastructure integration
The Vehicle Infrastructure Integration (VII), also known as "Connected Roadways" or "vehicle-to-everything" (V2X) technology, is a United States Department of Transportation initiative that aims to improve road safety by developing technology that connects road vehicles with their environment. This development draws on several disciplines, including transport engineering, electrical engineering, automotive engineering, telematics, and computer science. Although VII specifically covers road transport, similar technologies are under development for other modes of transport. For example, airplanes may use ground-based beacons for automated guidance, allowing the autopilot to fly the plane without human intervention.
The goal of VII is to establish a communication link between vehicles (via On-Board Equipment, or OBE) and roadside infrastructure (via Roadside Equipment, or RSE) to enhance the safety, efficiency, and convenience of transportation systems. Two potential approaches are the widespread deployment of a dedicated short-range communications (DSRC) link on the 5.9GHz band, and cellular communication (C-V2X). Either of these methods would allow vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communication.
The initiative has three priorities:
Current automotive safety technology relies primarily on vehicle-based radar, lidar, and sonar systems. This technology allows, for instance, a potential reduction in rear-end collisions by monitoring obstacles in front of or behind the vehicle and automatically applying the brakes when necessary. This technology, however, is limited by the sensing range of vehicle-based radar, particularly in angled and left-turn collisions,[citation needed] such as a motorist losing control of the vehicle during an impending head-on collision. The rear-end collisions addressed by current technology are generally less severe than angled, left-turn, or head-on collisions.[citation needed]
VII promotes the development of a direct communication link between road vehicles and all other vehicles nearby, allowing for the exchange of information on vehicle speed and orientation or driver awareness and intent. This real-time exchange of information may enable more effective automated emergency maneuvers, such as steering, decelerating, or braking. In addition to nearby vehicle awareness, VII promotes a communication link between vehicles and roadway infrastructure. Such a link may allow for improved real-time traffic information, better queue management, and feedback to vehicles.
Existing implementations of VII use vehicle-based sensors that can recognize and respond to roadway markings or signs, automatically adjusting vehicle parameters to follow the recognized instructions. However, this information may also be acquired via roadside beacons or stored in a centralized database accessible to all vehicles.
With a VII system in place, vehicles will be linked together. The headway between vehicles may therefore be reduced so that there is less empty space on the road, increasing the available capacity per lane. More capacity per lane will in turn imply fewer lanes in general, possibly satisfying the community's concerns about the impact of roadway widening. VII will enable precise traffic-signal coordination by tracking vehicle platoons and will benefit from accurate timing by drawing on real-time traffic data covering volume, density, and turning movements.
Real-time traffic data can also be used in the design of new roadways or modification of existing systems as the data could be used to provide accurate origin-destination studies and turning-movement counts for uses in transportation forecasting and traffic operations. Such technology would also lead to improvements for transport engineers to address problems whilst reducing the cost of obtaining and compiling data. Tolling is another prospect for VII technology as it could enable roadways to be automatically tolled. Data could be collectively transmitted to road users for in-vehicle display, outlining the lowest cost, shortest distance, and/or fastest route to a destination on the basis of real-time conditions.
Hub AI
Vehicle infrastructure integration AI simulator
(@Vehicle infrastructure integration_simulator)
Vehicle infrastructure integration
The Vehicle Infrastructure Integration (VII), also known as "Connected Roadways" or "vehicle-to-everything" (V2X) technology, is a United States Department of Transportation initiative that aims to improve road safety by developing technology that connects road vehicles with their environment. This development draws on several disciplines, including transport engineering, electrical engineering, automotive engineering, telematics, and computer science. Although VII specifically covers road transport, similar technologies are under development for other modes of transport. For example, airplanes may use ground-based beacons for automated guidance, allowing the autopilot to fly the plane without human intervention.
The goal of VII is to establish a communication link between vehicles (via On-Board Equipment, or OBE) and roadside infrastructure (via Roadside Equipment, or RSE) to enhance the safety, efficiency, and convenience of transportation systems. Two potential approaches are the widespread deployment of a dedicated short-range communications (DSRC) link on the 5.9GHz band, and cellular communication (C-V2X). Either of these methods would allow vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communication.
The initiative has three priorities:
Current automotive safety technology relies primarily on vehicle-based radar, lidar, and sonar systems. This technology allows, for instance, a potential reduction in rear-end collisions by monitoring obstacles in front of or behind the vehicle and automatically applying the brakes when necessary. This technology, however, is limited by the sensing range of vehicle-based radar, particularly in angled and left-turn collisions,[citation needed] such as a motorist losing control of the vehicle during an impending head-on collision. The rear-end collisions addressed by current technology are generally less severe than angled, left-turn, or head-on collisions.[citation needed]
VII promotes the development of a direct communication link between road vehicles and all other vehicles nearby, allowing for the exchange of information on vehicle speed and orientation or driver awareness and intent. This real-time exchange of information may enable more effective automated emergency maneuvers, such as steering, decelerating, or braking. In addition to nearby vehicle awareness, VII promotes a communication link between vehicles and roadway infrastructure. Such a link may allow for improved real-time traffic information, better queue management, and feedback to vehicles.
Existing implementations of VII use vehicle-based sensors that can recognize and respond to roadway markings or signs, automatically adjusting vehicle parameters to follow the recognized instructions. However, this information may also be acquired via roadside beacons or stored in a centralized database accessible to all vehicles.
With a VII system in place, vehicles will be linked together. The headway between vehicles may therefore be reduced so that there is less empty space on the road, increasing the available capacity per lane. More capacity per lane will in turn imply fewer lanes in general, possibly satisfying the community's concerns about the impact of roadway widening. VII will enable precise traffic-signal coordination by tracking vehicle platoons and will benefit from accurate timing by drawing on real-time traffic data covering volume, density, and turning movements.
Real-time traffic data can also be used in the design of new roadways or modification of existing systems as the data could be used to provide accurate origin-destination studies and turning-movement counts for uses in transportation forecasting and traffic operations. Such technology would also lead to improvements for transport engineers to address problems whilst reducing the cost of obtaining and compiling data. Tolling is another prospect for VII technology as it could enable roadways to be automatically tolled. Data could be collectively transmitted to road users for in-vehicle display, outlining the lowest cost, shortest distance, and/or fastest route to a destination on the basis of real-time conditions.