Hubbry Logo
Willys Go Devil engineWillys Go Devil engineMain
Open search
Willys Go Devil engine
Community hub
Willys Go Devil engine
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Willys Go Devil engine
Willys Go Devil engine
Willys Go Devil engine
View on Wikipedia
from Wikipedia
Go Devil
Overview
ManufacturerWillys-Overland
Layout
ConfigurationStraight-4
Displacement134.2 cu in (2.199 L)
Cylinder bore3.125 in (79.4 mm)
Piston stroke4.375 in (111.1 mm)
Cylinder block materialIron
Cylinder head materialIron
ValvetrainL-head
Compression ratio6.48:1
Combustion
Fuel system1-barrel carburetor
Fuel typeGasoline
Cooling systemWater-cooled
Output
Power output60 hp (45 kW; 61 PS)
Specific power0.42 hp/CID
Torque output105 lb⋅ft (142 N⋅m)
Chronology
SuccessorWillys Hurricane engine

The Willys L134 (nicknamed Go Devil) is a straight-4 flathead automobile engine that was made famous in the Willys MB and Ford GPW Jeep produced during World War II. It powered nearly all the Jeep vehicles built for the U.S. and Allies.[1] It was later used in a variety of civilian Jeep vehicles.

History

[edit]

In 1940, the Willys Quad was built to compete against the Bantam reconnaissance car for evaluation by the U.S. Army.[2] The two prototype Quads were powered by the Willys “Go-Devil” engine that turned out to be the automaker's greatest asset.[2] Willys' pilot vehicle was overweight compared to the Army's requirements, but the "Go Devil" engine rated at 55 hp (41 kW; 56 PS) included a heavier transmission, a combination that proved to be beneficial in the long-run for use in cross-country travel.[3]

The engine was developed by Willys' Chief Engineer, Delmar "Barney" Roos, and was the most powerful of the three prototype vehicles evaluated by the U.S. Army for production.[4] Roos took the "less than impressive" 48 hp (36 kW; 49 PS) automobile engine and increased its performance and durability.[5] The specifications by the Quartermaster Corps called for only 85 lb⋅ft (115 N⋅m) of torque at the rear axle.[5] The extra power made it the engine of choice for the U.S. Army.[5]

The engine displacement was 134.2 cu in (2,199 cc) with a 3.125 in (79.4 mm) bore and 4.375 in (111.1 mm) stroke, a very undersquare design. It was an L-head design, with valves parallel with the cylinders. Initial power output was 60 hp (45 kW; 61 PS) at 4000 rpm and 105 lb⋅ft (142 N⋅m) of torque at 2000 rpm with 6.48:1 compression.[4]

The L134 was phased out by the F-head Willys Hurricane engine beginning in 1950.

Applications

[edit]

References

[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Willys Go Devil engine

View on Grokipedia
from Grokipedia
The Willys Go Devil engine is an inline-four, L-head (flathead) gasoline engine with a displacement of 134.2 cubic inches (2.2 liters), developed by Delmar "Barney" Roos for Willys-Overland Motors in the late and introduced in 1939, celebrated for its simplicity, durability, and ability to power the military through the rigors of . This engine evolved from earlier Willys designs dating back to the 1920s Whippet Four, with key modernizations including insert bearings, a counterbalanced , and full-pressure , boosting output from an initial 48 horsepower to 60-68 gross horsepower at around 4,000 rpm and 105-109 lb-ft of at 2,000 rpm. Its undersquare dimensions—3.125-inch bore and 4.375-inch stroke—along with a of 6.48:1 (later up to 7.0:1 in some variants), contributed to its torque-rich performance suited for off-road and military applications, while weighing just 365 pounds bare. Selected as the powerplant for the U.S. Army's 1940 light contract due to its superior power-to-weight ratio over competitors from Ford and Bantam, the Go Devil propelled over 640,000 and Ford GPW Jeeps during WWII, earning praise from General as one of the war's most vital tools alongside the atom bomb, , and C-47 aircraft. Post-war, it continued in civilian Willys models like the CJ-2A, , and Jeepster through 1954, as well as in and vehicles until 1955, with production extending to industrial, marine, and licensed overseas applications (in , , and ) until 1965, when it was succeeded by the overhead-valve Hurricane engine. Its legacy endures as the foundational power source for the brand, influencing later F-head four-cylinder engines used until 1971 and symbolizing reliable off-road engineering.

Design and Specifications

Engine Configuration

The Willys Go Devil engine employs a straight-four inline configuration, featuring an L-head (side-valve) where the valves are located in the block adjacent to the cylinders, operated by a single driven by a timing from the . This design incorporates a single-barrel for fuel delivery and is constructed with a cast-iron block and head for enhanced durability and heat retention. The side-valve arrangement simplifies maintenance and reduces manufacturing complexity, contributing to the engine's reputation for ruggedness. The engine's dimensions include a bore of 3.125 inches (79.4 mm) and a of 4.375 inches (111.1 mm), creating an undersquare layout where the longer stroke relative to the bore optimizes low-end production suitable for off-road and load-hauling duties. This , combined with the displacement of 134.2 cubic inches (2.2 L), supports efficient power delivery at lower RPMs without requiring high-revving capabilities. Cooling is provided by a water-based system with forced circulation via a belt-driven centrifugal pump, featuring integral water jackets and passages within the cast-iron block and head to dissipate heat effectively. The system integrates with the vehicle's front-mounted radiator through upper and lower hoses, emphasizing simplicity and reliability for operation in dusty, high-temperature military environments, with provisions for a thermostat housing to regulate flow once operational temperatures are reached. This robust setup, lacking overly complex components, ensures consistent performance under prolonged stress. The stands at 6.48:1, tailored to operate efficiently on low-octane wartime , minimizing risks and enhancing fuel economy in resource-constrained settings. This low compression, paired with the engine's overall architecture, enables a power output of 60 horsepower at 4,000 RPM.

Performance Characteristics

The Willys Go Devil engine produced a peak output of 60 horsepower (45 kW) at 4000 rpm and 105 lb⋅ft (142 N⋅m) of at 2000 rpm. Its undersquare dimensions, featuring a bore of 3.125 inches and a of 4.375 inches, emphasized low-end production, which proved ideal for off-road applications demanding strong pulling capability at reduced engine speeds without relying on high revs. Fuel efficiency in Jeep vehicles typically ranged from 15 to 20 miles per , a performance attributable to the engine's single-barrel Carter WO carburetor and 6.48:1 , which balanced simplicity and reliability over outright economy. Early prototypes of the engine were initially rated at 48 horsepower, with output increased to 60 horsepower by 1941 through targeted modifications, including revisions to the and timing. Durability testing under full-load conditions confirmed the engine's robustness, enabling continuous operation for over 100 hours at more than 60 horsepower and 4400 rpm, a benchmark achieved during wartime development to meet military demands.

Development and Production

Origins and Design Process

The development of the Willys Go Devil engine was spearheaded by Delmar "Barney" Roos, a seasoned engineer hired by Willys-Overland in the late as and vice president of engineering to revitalize the company's outdated powerplants. Roos, whose prior career included significant contributions at firms like Pierce-Arrow and , focused on re-engineering the existing 134.2 cubic inch (2.2 L) inline-four engine originally derived from the 1926 Whippet model, which had been plagued by reliability issues. The redesign process began in 1938, aiming initially for passenger car applications, with the updated entering production in 1939 and delivering approximately 61 horsepower at 4,000 rpm—significantly increased from the predecessor's 48 hp—through enhancements like insert bearings, a counterbalanced , aluminum pistons, and a fully pressurized lubrication system. In 1940, the engine was officially named the "Go " to underscore its rugged, unrelenting performance and reliability, evoking a sense of indomitable power suited to demanding conditions. This design was rapidly adapted in response to the U.S. Army's request for bids on a lightweight , where Roos advocated for incorporating the Go Devil despite its relative weight, prioritizing its superior output—around 105 lb-ft at 2,000 rpm—for off-road capability over outright speed. Key engineering decisions emphasized simplicity for , leveraging existing Willys-Overland tooling and introducing innovations such as wet-sump lubrication to ensure durability and ease of maintenance in field conditions, setting it apart from competitors like the lighter but less powerful Bantam engine.

Manufacturing and Evolution

The Willys Go Devil engine entered production in 1940 at the company's Toledo, Ohio plant, following its initial application in passenger cars the prior year. Designed by engineer Barney Roos to meet urgent military demands, manufacturing rapidly scaled up to support World War II contracts, with Willys producing over 361,000 units for the MB Jeep alone by September 1945. This wartime output represented a significant portion of the engine's total volume, driven by the need for reliable powerplants in quarter-ton reconnaissance vehicles. Overall production by Willys and licensees exceeded 800,000 units through 1965. During the war, adaptations focused on enhancing reliability amid resource constraints and operational challenges. Material substitutions were implemented to address shortages, such as shifting certain components from aluminum to steel where feasible, without compromising core functionality. Postwar production continued at the Toledo facility through the early 1950s, powering civilian models like the CJ-2A, CJ-3A, and station wagons, with the engine phased out in Jeeps by 1953 in favor of the F-head four-cylinder and later the Hurricane inline-six, though it remained in use in other applications until 1955. The engine's rugged design proved adaptable to peacetime uses, though incremental improvements like enhanced cooling systems were introduced to mitigate issues such as overheating in demanding environments.

Applications

Military Uses

The Willys Go Devil engine powered the and Ford GPW Jeeps, serving as the primary light reconnaissance vehicle for U.S. and Allied forces during from 1941 to 1945. Over 640,000 such Jeeps were produced, with the engine's 60 horsepower enabling a top speed of 65 mph while providing reliable performance across diverse terrains in the European and Pacific theaters. These vehicles supported critical operations, including troop transport, towing artillery, and command duties, proving indispensable in campaigns from to the and island-hopping in the Pacific. The engine's military origins trace to the 1940 Willys Quad prototype, a four-wheel-drive that demonstrated superior torque and off-road capability during U.S. Army trials, directly influencing the standardized design. It was also integrated into amphibious variants like the Ford GPA "Seep," a water-capable used for river crossings and coastal assaults, enhancing Allied logistical flexibility in wet environments. Army tests highlighted the Go Devil's robustness, underscoring its ability to handle extreme conditions like muddy battlefields and steep inclines under combat loads. Following , the Go Devil continued in military service through the in the , produced until 1952, where it supported U.S. forces in rugged Korean terrain for scouting and supply roles. Exports extended its reach, with programs supplying to British and Soviet forces during and after the war, aiding operations in diverse global conflicts.

Civilian Implementations

Following , the Go Devil engine found widespread adoption in civilian vehicles, particularly the Willys-Overland CJ-2A introduced in 1945, which marked the transition of the military Jeep platform to commercial and agricultural use. This model, powered by the 134-cubic-inch L-head four-cylinder engine producing 60 horsepower, was designed for farm utility tasks such as plowing fields, hauling equipment, and off-road transport in rural areas. Over 214,000 CJ-2A units were produced through 1949, establishing the engine's reliability in non-military applications before the introduction of the Hurricane engine in the early 1950s. The engine continued in the CJ-3A Jeep from 1949 to 1953, retaining the same 60-horsepower output to support expanded civilian roles in industrial and farming operations, with approximately 131,500 units built during this period. By 1950, over 200,000 Go Devil engines had been installed in these non-military Jeeps, underscoring their durability for everyday hauling and utility work. The engine's characteristics, peaking at low speeds, proved particularly effective for trailers and accessing remote work sites on farms. Beyond passenger-oriented Jeeps, the Go Devil powered Willys Jeep trucks, including 1-ton models produced from 1947 to 1955, where it enabled heavy-duty commercial transport and payload capacities suited to and delivery services. It also served in stationary civilian applications, such as generators and water pumps, providing dependable power for remote agricultural and industrial sites through the mid-1950s. In export markets and aftermarket modifications, the engine was adapted for agricultural during the 1950s. These adaptations highlighted the Go Devil's versatility and ease of maintenance in global farming contexts, contributing to its prolonged use in non-automotive roles.

Legacy and Influence

Engine Variants and Successors

The L134 designation referred to the primary variant of the Go Devil engine, a 134-cubic-inch inline-four flathead that powered military vehicles from 1941 to 1945 with wartime tuning optimized for reliability and , delivering 60 horsepower at 4,000 rpm. This configuration emphasized low-end power for off-road performance, maintaining a of 6.48:1 to accommodate variable fuel quality during the war. For civilian applications post-1945, the L134 underwent minor refinements, including an upgraded intake system introduced around 1949 in models like the Kaiser Henry J, which boosted output to 68 horsepower at 4,000 rpm and 109 lb-ft of torque while raising the to 7:1 for improved efficiency on higher-octane fuels. These changes retained the core 134-cubic-inch displacement but enhanced drivability without altering the fundamental block or valvetrain design. Although no major displacement variants emerged, postwar refinements explored higher compression ratios up to 7:1. The Go Devil began to be replaced by the Willys Hurricane F-134 engine in 1950 for certain applications, an F-head (inlet-over-exhaust) inline-four that built on the L134's lower for better breathing and power, achieving 72 horsepower at 4,000 rpm in early applications like the 1953 CJ-3B, though Go Devil production continued until 1965. This successor marked a shift to overhead valves for the side, improving while preserving compatibility with existing chassis. Internationally, licensed versions extended the Go Devil's reach, such as the Hotchkiss M201 produced in from the early 1950s to 1965, which adapted the L134 with front-mounted placement and metric-standard components for local manufacturing and military use. Aftermarket modifications, including overbore kits to 140 cubic inches and custom high-compression heads up to 7.2:1, emerged in the postwar era among enthusiasts seeking modest performance gains without full engine swaps.

Cultural and Historical Significance

The Willys Go Devil engine, as the powerplant of the iconic during , became a symbol of Allied resilience and American ingenuity, powering over 360,000 units that served in diverse theaters from Europe to the Pacific. General ranked the Jeep among the four most vital tools for victory, praising its versatility in , , and troop transport, while Army Chief of Staff called it "America’s greatest contribution to " for its reliability under extreme conditions. This engine's rugged performance embodied the era's spirit of , transforming the Jeep into a cultural emblem of wartime heroism that transcended military utility. The Go Devil's legacy endures in popular culture through its association with the Jeep's portrayal in films depicting WWII exploits, such as the 1949 production Sands of Iwo Jima, where the vehicle appears in combat sequences symbolizing Marine tenacity during the Battle of Iwo Jima. Beyond cinema, the engine's influence persists in modern off-roading communities, where enthusiasts restore original L-134 units for vintage events that recreate mid-20th-century adventures. Organizations like the Go-Devils Unite club organize runs limited to period-correct Jeeps equipped with Go Devil engines, fostering appreciation for its low-rev torque suited to challenging terrain, as seen in annual gatherings like the Go Devil Run. Similarly, the Bantam Jeep Heritage Festival in June 2025 highlights restored examples in trail rides and displays, drawing thousands to celebrate the engine's role in pioneering recreational four-wheeling. Historically, the Go Devil engine is featured in permanent exhibits at the National Museum of the U.S. Army, underscoring its contributions to military mobility in WWII displays that include restored Willys Jeeps. Its designer, Barney Roos, received posthumous recognition for automotive innovations. Economically, the Go Devil enabled Willys-Overland's post-war survival by sustaining Jeep production, which generated critical revenue amid the company's financial struggles; this momentum facilitated its acquisition by in 1953 for approximately $60 million, revitalizing both entities and paving the way for Jeep's expansion under subsequent owners like American Motors and . Under Kaiser, Jeep sales surged to over $160 million annually within two years, yielding nearly $5 million in profits and securing the brand's long-term viability.

References

  1. https://www.motortrend.com/features/1408-the-willys-go-devil-engine-jeep-encyclopedia
  2. https://macsmotorcitygarage.com/the-greatest-engine-of-world-war-ii-the-willys-go-devil/
  3. https://automotiveamerican.com/2024/12/18/barney-roos-and-the-go-devil-engine/
  4. http://www.42fordgpw.com/engine-go-devil-l-134/
  5. https://oljeep.com/JeepEngines.pdf
  6. https://metrommp.com/Classic-Car-Guides-Ratings-Features/Jeep/1945-Jeep-Willys-Catalog/
  7. http://www.willys.co.rs/go_devil.htm
  8. https://www.jeeptech.com/engine/godevil134.html
  9. https://www.hemmings.com/stories/barney-roos/
  10. https://www.farmjeep.com/2020/01/14/who-would-want-a-jeep-predictions-from-1943-and-1944/
  11. https://www.slashgear.com/1519866/about-willys-go-devil-jeep-engine/
  12. https://www.military.com/off-duty/autos/willys-jeep-how-us-army-created-greatest-military-vehicle-of-all-time.html
  13. https://www.kaiserwillys.com/willys-jeep-history-military-jeep-specs-and-history/
  14. https://www.jeep.com/history/1940s.html
  15. https://www.militarytrader.com/military-vehicles/what-model-military-jeep
  16. https://blog.kaiserwillys.com/willys-jeep-m38-a-brief-history/
  17. https://www.militaryfactory.com/armor/detail.php?armor_id=656
  18. https://truck-encyclopedia.com/coldwar/us/willys-m38.php
  19. https://www.kaiserwillys.com/about-willys-jeep-cj-2a-cj2a-jeep-specs-and-history/
  20. https://www.hemmings.com/stories/peace-jeep/
  21. https://www.jeepdatabase.com/cj3a
  22. https://www.kaiserwillys.com/about-willys-jeep-pickup-truck-jeep-specs-and-history/
  23. https://cj3b.info/Hurricane.html
  24. https://www.thecj2apage.com/forums/wwii-go-devil-engine-mods_topic41771.html
  25. https://www.motortrend.com/features/go-devil-run-part-1
  26. https://www.motortrend.com/events/2022-go-devil-run-part-1
  27. http://www.bantamjeepfestival.com/
  28. https://www.facebook.com/story.php?story_fbid=1037665705057266&id=100064415395102
  29. https://about.kaiserpermanente.org/who-we-are/our-history/myth-buster-henry-j-kaiser-and-the-jeep
  30. https://auto.howstuffworks.com/1953-1956-jeep.htm
Add your contribution
Related Hubs
User Avatar
No comments yet.