130 53 TK

This article includes a list of general references, but it lacks sufficient corresponding inline citations. Please help to improve this article by introducing more precise citations. (March 2012) (Learn how and when to remove this message)

You can help expand this article with text translated from the corresponding article in Finnish. (June 2023) Click [show] for important translation instructions. Machine translation, like DeepL or Google Translate, is a useful starting point for translations, but translators must revise errors as necessary and confirm that the translation is accurate, rather than simply copy-pasting machine-translated text into the English Wikipedia. Do not translate text that appears unreliable or low-quality. If possible, verify the text with references provided in the foreign-language article. You must provide copyright attribution in the edit summary accompanying your translation by providing an interlanguage link to the source of your translation. A model attribution edit summary is Content in this edit is translated from the existing Finnish Wikipedia article at [[:fi:130 TK]]; see its history for attribution. You may also add the template {{Translated|fi|130 TK}} to the talk page. For more guidance, see Wikipedia:Translation.

Key Information

130 mm tornikanuuna
130 53 TK located in Isosaari, Finland.
Type	Fixed coastal artillery gun
Place of origin	Finland
Service history
In service	1984–present
Used by	Coastal artillery of Finland
Production history
Designer	Tampella
Manufacturer	Tampella
Produced	1982–1990
Specifications
Mass	16,000 kg (35,000 lb)
Barrel length	6.890 m (22 ft 7 in) L/53
Crew	3+7
Shell	130 x 846 mm R
Caliber	130 mm (5.1 in)
Action	Automatic
Rate of fire	6 rounds/min
Muzzle velocity	860 m/s (2,800 ft/s)
Maximum firing range	27 km (17 mi) (unassisted) 40 km (25 mi) (assisted)
Show more

130 53 TK or 130 TK ("130 mm rifled, 53 length caliber, turret gun") is a Finnish fixed, heavy artillery piece, manufactured by Tampella. The caliber is 130 mm. The 130 53 TK is the main weapon of the Finnish coastal artillery.

The maximum firing range with high-explosive fragmentation shells is 27 km and with anti-ship base bleed shells is 40 km.^[1] The initial velocity of the shot is around 860 m/s depending on the shell and amount of propellant used. When firing temporary bursts with auto-loader the gun can fire 3 shots in 20 seconds and up to 6 shots per minute during sustained firing. The gun weighs 16,000 kg (including shield) and the length of the barrel is 6,818 mm. The gun is operated by 3 NCOs and 7 soldiers.

The development of the 130 TK started in the 1970s and lasted for 10 years. In 1971, the Finnish national defence committee suggested that the then main current coastal artillery gun (152/50 T) would be replaced by the end of the 1970s. A development contract was signed with Tampella in 1975. It was decided that the calibre would be 130 mm, since the mobile coastal artillery used towed guns of same calibre (130 K 54). A prototype was constructed on the island of Isosaari in 1980, where test firing was conducted until 1983.

The Finnish Defence Forces signed a series production contract with Tampella in 1982. The first battery was installed in 1984 and the final battery was installed in 1990. The spaces required for the gun, such as room for the gun crew and ammunition storage was built inside the base rock with concrete casemates for shaping.

Initially, there were no special sea target shells, instead, regular fragmentation shells were used with timed, immediate and delayed fuses for differences in desired effect. A first attempt to develop sea target shells failed in the 1980s, with the company going bankrupt. A fresh start was done in the beginning of the 1990s for payload shells similar to some anti-tank shells.

Targeting for these guns is done by a targeting team either using a laser range and direction finder or optically with triangulation (requiring two teams). The triangulation method is safer as there is nothing transmitted towards the target as in the laser rangefinder case. The coordinates (if laser acquired) or directional information in the case of triangulation are sent to a calculation unit which then calculates the targeting solution for the guns. This is a continuous (tracking) operation since the targets are moving. The gun itself can be directed manually with the data coming from the central calculation unit or fully automatically based on the data received via a data bus from the central calculator. The gun is also fully capable of autonomous operation with its own laser rangefinder and firing solution computer.