Hubbry Logo
Australind (train)Australind (train)Main
Open search
Australind (train)
Community hub
Australind (train)
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Australind (train)
Australind (train)
Australind (train)
View on Wikipedia
from Wikipedia

Australind
The Australind at Bunbury in January 2014
Overview
Service typePassenger train
StatusSuspended (until early 2026)
LocaleSouth West Western Australia
First service24 November 1947
Last service19 November 2023
Current operatorTranswa
Former operatorsWAGR (1947–1975)
Westrail (1975–2000)
WAGR Commission (2000–2003)
Ridership60,507 (year to June 2022)
Route
TerminiPerth
Bunbury
Stops13
Distance travelled167 kilometres
Average journey time2 hours 30 minutes
Service frequencyTwice daily
Train number9/10
Line usedSouth Western Railway
Technical
Rolling stockADP/ADQ class railcars
Track gauge1,067 mm (3 ft 6 in)
Route map
Map
Train services are replaced
by coaches until early 2026
Legend
0.0
 Perth Transperth
30.1
 Armadale Transperth
37.6
 Byford Transperth
46.5
 Mundijong
54.4
 Serpentine
71.8
 North Dandalup
87.0
 Pinjarra
112.0
 Waroona
124.9
 Yarloop
129.4
 Cookernup
138.9
 Harvey
159.7
 Brunswick Junction
181.0
 Bunbury Terminal Transwa
This diagram:

The Australind is a currently suspended rural passenger train service in Western Australia operated by Transwa on the South Western Railway between Perth and Bunbury.

The service was suspended in November 2023 due to the shutdown of the Armadale line for upgrading and the retirement of rolling stock. The route will be temporarily replaced by coach bus services until early 2026.[1][2]

History

[edit]
The Australind, with its original 1947-built passenger cars, leaves Perth railway station in March 1986 hauled by an X class locomotive

The Australind service began on 24 November 1947 and was hauled initially by U class steam locomotives.[3] With an average speed of 63 km/h (39 mph), it was the fastest narrow gauge passenger train in Australia.[4] It was named to commemorate the city of that name envisioned by Marshall Waller Clifton on Leschenault Inlet 100 years previously. The current hamlet of Australind, a satellite town of Bunbury, has never had a passenger rail service, nor even a railway line.

In February 1958, X class diesel locomotives took over. The service was relaunched on 1 October 1960 with onboard catering removing the need for an extended stop at Pinjarra. In November 1987, the current ADP/ADQ class railcars took over the service, reducing the journey time to 2 hours 30 minutes.[5][6][7][8]

In November 2023 the service was suspended due to the shutdown of the Armadale line for upgrading.[1] The final two services on the current trainsets – reserved for invited special guests – were conducted on 18 and 19 November 2023.[9] The route was then temporarily replaced by coach bus services. Although originally scheduled to re-open in mid-2025, delays in the upgrade of the Armadale line pushed back the resumption of train services to early 2026.[10][2]

Rolling stock

[edit]
Original livery
2003 refurbished livery
2007 refurbished livery

When introduced, the train consisted of new carriages built by the Midland Railway Workshops.[6] In August 1985, Westrail awarded Comeng, Bassendean a contract for five Westrail ADP/ADQ class railcars, three ADPs with driving cabs and two ADQs, using a similar body shell and interior fitout to the New South Wales XPT carriages.[11] Each carriage was powered by a Cummins KTA19 coupled to a Voith transmission. They usually operate as a three or four carriage set. Five carriage set operation is not possible due to the limited platform length available at Perth station.[7]

In July 2003, the trains were painted in a new livery in line with the formation of Transwa. In 2007, the trains were painted white as part of a refurbishment program. In 2010/11, new seats were fitted.[12]

In 2019, two new train sets, each consisting of a three-car diesel multiple unit, were ordered for the Australind at a cost of $54 million. The trains will be built by Alstom in Bellevue as diesel-powered variants of the Transperth C-series trains already under construction. The new train sets will be introduced to the service when the route resumes in 2026.[13][14][15] In January 2025 it was announced that two additional train sets would be procured for the route for $80 million; the new trains were obtained to increase reliability and future frequency of the service.[16] Testing for the new trains began in 2025.[2]

Route

[edit]

The Australind departs from Perth traversing the metropolitan Armadale line to Armadale, then the South Western Railway to Bunbury.[17]

Stations

[edit]

Ridership

[edit]

The Australind had 77,810 passengers in the year leading up to June 2023.[18]

See also

[edit]

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Australind (train)

View on Grokipedia
from Grokipedia
The Australind is a rural service in , operated by , that connects Perth with Bunbury over a 167-kilometre route along the South Western Railway line. Launched in 1947 as a daily service initially powered by , it has evolved through diesel railcars and remains a key link for regional travel, tourism, and commuting in the Peel and South West regions. The service, named after the historic Australind land company, was suspended in 2023 due to infrastructure upgrades but is set to resume in early 2026 with modern three-car railcars under the WA Railcar Program; the new railcars are currently undergoing testing as of late 2025. The Australind's route includes major stops such as Armadale, Pinjarra, and Harvey, providing accessible facilities like air-conditioned carriages, onboard toilets, and connections to coach services for further destinations including Albany and Margaret River. Historically, it transitioned from slower operations at around 63 km/h to more efficient diesel multiple units built by Comeng in the , with the original fleet now retired. In a major upgrade announced in January 2025, the Western Australian Government committed $80 million to procure two additional three-car sets, aiming to boost weekday frequency from two to five return trips and enhance reliability amid growing regional demand. This expansion aligns with the reopening of the and supports economic development in Bunbury, Peel, and surrounding areas by improving options.

Overview

Service Description

The Australind is a regional passenger rail service operated by , providing diesel-powered connectivity over approximately 167 km between Perth and Bunbury in . The service links Perth Station to Bunbury Terminal, serving intermediate stops including Armadale, Pinjarra, and Waroona to facilitate regional travel. Prior to its suspension, it operated with two return trips daily, completing the one-way journey in about 2.5 hours. Managed by the Public Transport Authority (PTA) under the brand, the Australind—named as an express service since its origins in 1947—has been suspended since November 2023 to accommodate upgrades and the retirement of its existing . Resumption is planned for early 2026 with new railcars, alongside expansions such as two additional train procurements announced in 2025 to boost weekday frequency.

Regional Importance

The Australind train service plays a crucial role in connecting Perth to Bunbury and the surrounding Peel region, facilitating daily commuting for regional workers, enabling access to educational institutions, and supporting by allowing day trips from the capital to coastal and rural attractions in the South West. By providing a reliable passenger rail option along this 167 km corridor, it serves as an alternative to road travel, particularly in a region where private vehicles dominate transport patterns due to limited public options. Economically, the service enhances opportunities for approximately 116,000 residents in the Bunbury-Geographe sub-region (as of 2024) by improving access to employment hubs in Perth, vocational training at South Regional TAFE, and essential services such as healthcare facilities. This connectivity supports local economies in Peel and the South West, where the combined exceeds 300,000, by promoting workforce mobility and reducing reliance on personal vehicles for inter-regional trips. The service's role in further bolsters regional businesses, drawing visitors to explore the area's natural landscapes and heritage sites. The train's name derives from the historical Australind Land Company, a 1840s initiative under the that aimed to establish a settlement blending Australian and Indian commercial interests, led by Marshall Waller Clifton; this heritage underscores the service's symbolic ties to the region's colonial past and ongoing development. Socially, it fosters cohesion by linking isolated rural areas to urban centers, addressing challenges in a car-dependent South West where options are sparse. Integrated within Western Australia's broader network, the Australind connects seamlessly to Transperth's suburban rail services at Perth Station for seamless transfers to the , while at Bunbury Passenger Terminal, it links to regional bus routes operated by and local providers, extending reach to nearby towns like and . With the Bunbury-Geographe sub-region's population projected to reach approximately 127,000 by 2031 amid rapid regional growth, the service holds significant potential to accommodate increasing demand for sustainable travel options. Its suspension since November 2023 has temporarily altered local patterns, but resumption is planned for 2026 with enhanced frequency to meet future needs.

History

Establishment and Early Operations

The Australind service was launched on 24 November 1947 as Western Australia's first named express , replacing slower mixed freight and services on the route. The inaugural run departed Perth at 8:55 a.m. and arrived in Bunbury at 12:10 p.m., covering the approximately 167 km distance in about 3 hours and with limited stops to emphasize speed and convenience. The train was hauled by a British-built U-class , such as U 659, and consisted of six corridor carriages—two first-class and four second-class—built in the Midland Junction workshops, featuring leather seats, fluorescent lighting, and intercommunication doors for comfort. The name "Australind" was chosen to commemorate a proposed colonial settlement of the same name on Leschenault Inlet, envisioned a century earlier by Marshall Waller Clifton. This settlement was promoted by the Western Australian Company, formed in during the 1840s, which blended "" and "" in the name due to plans for breeding horses there to supply the . The company acquired land in the region for resale to settlers, with the first arrivals in aboard the ship Parkfield, though the full colony scheme ultimately faltered. Early operations featured daily return expresses on the South Western Railway, serving as a key daytime link between Perth and Bunbury with stops at major intermediate stations like Pinjarra. By the mid-1950s, an additional stop at Armadale was introduced in 1953 to accommodate growing suburban demand. A significant development came in February 1958, when U-class steam locomotives were replaced by X-class diesel locomotives, marking the transition to more reliable and efficient motive power for the service. This change improved operational consistency while maintaining the express focus, with journey times averaging around 63 km/h.

Upgrades and Service Changes

In November 1987, the Australind service received a major upgrade with the introduction of new air-conditioned ADP/ADQ-class diesel railcars built by Comeng in Bassendean, replacing the previous locomotive-hauled coaches and reducing the Perth to Bunbury journey time to approximately 2.5 hours. These railcars enabled higher speeds on the narrow-gauge track, marking a significant improvement in comfort and efficiency for passengers. During the 1990s, the service was operated by Westrail, the trading name of the (WAGR), which focused on enhancing reliability through maintenance of the aging infrastructure inherited from earlier decades. In 2000, WAGR's freight operations were privatized and sold to Australian Railway Group, while passenger services transitioned to the WAGR Commission. By May 2003, the Public Transport Authority (PTA) assumed responsibility for regional passenger rail, rebranding the service under to streamline operations and improve service delivery across Western Australia's rural network. In the 2000s, the Australind maintained two daily return services between Perth and Bunbury, providing consistent connectivity for regional commuters and travelers. By the 2010s, integration with the SmartRider system allowed concession holders—such as students, seniors, and pensioners—to use their cards for discounted fares on services, including the Australind, facilitating seamless regional travel with metropolitan . Infrastructure enhancements in the and early emphasized safety and capacity. Planning for the METRONET Byford Rail Extension began in the mid-, involving track reconfiguration and duplication elements between Armadale and Byford to support future growth, though major construction occurred later. In 2022, the Western Australian Government allocated $3 million to upgrade 11 level crossings along the Australind corridor, installing barriers, flashing lights, and boom gates to mitigate collision risks and enhance pedestrian safety. Leading up to its suspension, the service operated with the original 1987 ADP/ADQ railcars, which faced increasing reliability challenges due to age and wear. In November 2020, the entire fleet was temporarily withdrawn for axle box repairs following a safety inspection, highlighting ongoing demands. The final train services ran on November 19, 2023, after which replacement road coaches were introduced amid preparations for upgrades.

Suspension and Planned Resumption

The service was suspended on 20 November 2023, coinciding with the full closure of the to facilitate the METRONET Byford Rail Extension project. This shutdown was necessary to enable major infrastructure upgrades, including track duplication, new signalling, and station improvements along the line. Additionally, the suspension aligned with the retirement of the aging ADP/ADQ-class diesel railcars, which had operated the service since and reached the end of their operational life. In place of rail services, introduced replacement coach operations along the Perth-Bunbury route, maintaining connections to key intermediate stations such as Pinjarra, Waroona, and Harvey. These road coaches, operating under dedicated timetables like AA3 and AX3 for morning and afternoon runs, provided continuity for passengers but introduced longer journey times of approximately 3-4 hours compared to the previous 2.5-hour rail trip, thereby affecting the efficiency of regional travel and freight integration. Although the reopened on 12 October 2025, the interim coach service has continued to support essential connectivity for the South West region until the resumption of rail services, though it has highlighted the limitations of bus alternatives during the extended outage. Services are scheduled to resume in early 2026 upon completion of the Byford Rail Extension, introducing modern C-series diesel multiple units built by . Under the 2019 WA Railcar Program, two initial three-car sets were procured for the service. The initial timetable will feature five daily return trips between Perth and Bunbury on weekdays, a significant increase from the pre-suspension frequency of two returns, to better meet commuter demand. These new three-car sets will enhance reliability and capacity, with dynamic testing already underway on the network as of October 2025. In January 2025, the Western Australian Government announced the procurement of two additional three-car C-series train sets, expanding the dedicated fleet from two to four three-car sets and enabling the higher service frequency. This $80 million investment aims to boost operational resilience and accommodate growing ridership in the corridor. The revival ties into METRONET's broader $12.4 billion program of rail enhancements across Perth's southern suburbs and South West Gateway, designed to support population growth projected to reach 3.5 million by 2050 and improve long-term regional accessibility.

Route and Infrastructure

Route Overview

The Australind operates over a 167 km route from Perth to Bunbury, primarily following the South Western Main Line, which was opened in 1893 as the primary rail corridor connecting the state capital to the South West region. The alignment begins at Perth Station, proceeding southeast along the through urban and suburban areas, paralleling the Kwinana Freeway in sections near Armadale before branching south at Armadale toward Pinjarra. Beyond Pinjarra, the route transitions to more rural landscapes, featuring a mix of single-track and duplicated segments, with the duplicated portions concentrated in the inner suburban areas to support higher metro frequencies while the outer sections remain predominantly single track. The route traverses the flat , characterized by low-lying terrain, sandy soils, and occasional wetlands, particularly in the Pinjarra Plain subregion where waterlogging influences the landscape. Key historical infrastructure includes 1890s-era engineering feats such as the Asquith Bridge over the south of Pinjarra, a timber railway structure spanning nearly 130 meters that exemplified early colonial construction techniques but was destroyed by bushfire in February 2015, and the original timber over the Serpentine River north of Serpentine Station, later replaced with a steel design to enhance durability. These features highlight the corridor's adaptation to the region's gentle topography and river crossings without significant gradients or mountainous challenges. The line uses the standard 1,067 mm narrow gauge typical of Western Australia's network and is fully diesel-operated, with no along the corridor. Capacity is constrained by single-track sections in the outer rural areas, which limit service frequency to twice daily in each direction, though passing loops allow for operational flexibility. METRONET upgrades, including the Byford Rail Extension and transformations completed in 2025, incorporate track enhancements and removals on the Perth-Armadale segment, enabling the Australind's resumption in early 2026 with improved reliability, though full duplication to Bunbury remains limited to urban improvements.

Stations and Stops

The Australind train service operates between Perth Station and Bunbury Passenger Terminal, with intermediate stops serving the South Western Railway corridor. Perth Station serves as the northern terminus and a major transport hub in the Perth , integrating with Transperth's extensive suburban rail, bus, and ferry networks for seamless connections; it features multi-level parking facilities with over 1,000 spaces, including accessible bays, and full wheelchair accessibility via lifts, ramps, and tactile indicators. At the southern end, Bunbury Passenger Terminal, opened on 29 May 1985 as a replacement for the original city-center station, provides regional facilities including connections to road coach services to destinations like Albany and Augusta, as well as local bus links to the Bunbury Visitor Centre; the terminal offers wheelchair-accessible toilets, booking offices, and waiting areas with shelters. Key intermediate stops include Armadale Station, a busy suburban interchange on the network with platform shelters, parking, and direct bus connections for Perth's southeastern suburbs. Pinjarra Station, a rural service center, retains heritage elements from its 1893 construction, including a listed railway goods shed and platform, and serves as a hub for local and with basic amenities like seating and lighting. Other notable stops, such as Byford, Mundijong, and Harvey, provide essential access for surrounding communities, often with request-only service to optimize journey times. The service typically includes 12 intermediate stops, totaling 14 stations, though express patterns may skip request stops like Serpentine, North Dandalup, Yarloop, Cookernup, and Brunswick Junction unless pre-booked; all platforms feature basic shelters, lighting, and SmartRider ticketing compatibility for contactless fares. Facilities across the stops emphasize accessibility, with wheelchair ramps and low-floor boarding available on the train since the introduction of railcars in 1987, and station upgrades in the early 2000s—such as at Brunswick Junction, Pinjarra, and Waroona—ensuring compliant platforms and paths for passengers with disabilities; limited amenities like kiosks and restrooms are primarily at the terminals. Historically, the original stops established in 1947 for the named Australind service aligned with the pre-existing South Western Railway infrastructure from the 1890s, but were expanded and modernized in the 1980s to accommodate diesel railcars, including platform extensions and signaling improvements for compatibility with the new formations.

Rolling Stock

Historical Formations

The Australind service commenced operations in 1947 using steam locomotives, marking the beginning of its historical rolling stock configurations. Initially hauled by U-class 4-6-4T tank locomotives, the train achieved an average speed of 63 km/h over its 167 km route, making it the fastest narrow-gauge passenger service in Australia at the time. By the early 1950s, the service transitioned to W-class 4-8-2 mixed-traffic steam locomotives, which became the primary haulers due to their reliability and low axle loading suitable for the South Western Railway's infrastructure. These locomotives operated until the end of steam traction in 1971. The steam-era consists featured 4 to 6 corridor-type passenger carriages, all constructed in 1947 at the ' Midland Workshops. These all-steel vehicles measured 59 feet in length and 8 feet 1 inch in width, with a headroom of 8 feet 3 inches, and each weighed approximately 25 tonnes. Seating accommodated around 200 passengers across first-class (typically two cars) and second-class (four cars) sections, with reversible seats and central lobbies for easy access; a dedicated provided refreshments, enhancing passenger comfort on the daytime express. The formation emphasized corridor access for movement between cars, and the top speed reached approximately 80 km/h under favorable conditions. From 1971 to 1987, the Australind shifted to haulage as part of Western Australia's broader dieselization efforts, utilizing X-class diesel-electric locomotives built by Beyer Peacock between 1954 and 1958. These 779 kW (1,045 hp) units, with a top speed of 100 km/h, pulled the legacy carriages, which remained in service without major replacement. Formations expanded to 5 to 7 cars during peak periods to handle increased demand, retaining the original first- and second-class seating arrangements along with the buffet facility. Later in this period, XA-class variants—rebuilt X-class locomotives with upgraded engines—also contributed to operations, ensuring reliable performance until the introduction of self-propelled railcars. In 1987, the service adopted diesel railcars with the introduction of the Westrail ADP/ADQ class, built by Comeng at Bassendean specifically for the Australind route. The fleet consisted of three power cars (ADP) and two trailer cars (ADQ), typically operated as one three-car set (ADP-ADQ-ADP) and one two-car set (ADP-ADP), with occasional longer formations. Each power car was powered by two KTA19-R diesel engines, each rated at 373 kW (500 hp) at 2100 rpm, for a total of 746 kW per power car. Each set provided seating for 140 to 210 passengers in air-conditioned saloons, initially divided into first-class and economy sections until unification to all-economy in the early ; amenities included onboard kiosks replacing the traditional buffet. Designed for a maximum speed of 120 km/h but operated at 110 km/h in service, these stainless-steel railcars improved efficiency and ride quality. The fleet operated until its retirement in November 2023, prompted by escalating maintenance costs and the need for infrastructure upgrades ahead of new . One set (ADP102-ADQ121) is preserved at the Western Australian Rail Transport Museum.

New Diesel Multiple Units

In 2019, the Public Transport Authority of Western Australia (PTA) selected Alstom as the preferred supplier under the $1.3 billion (AUD) WA Railcar Program to manufacture six new diesel railcars, comprising two three-car sets, specifically for the Australind service. These railcars form diesel-powered variants of the C-series design, featuring diesel-electric propulsion and compatibility with the 1,067 mm narrow-gauge track used on the South Western Railway line. Built at Alstom's Bellevue facility in Western Australia, the initial sets were targeted for delivery in 2022–23 to support regional operations with a projected 35-year service life. Delivery was delayed, with the first set arriving in late 2025; the railcars are undergoing testing ahead of service resumption in early 2026. The design of the new units was unveiled in January 2020, showcasing a modern interior optimized for passenger comfort on journeys. Each three-car set includes USB charging ports at seats, complimentary connectivity, air-conditioning throughout, and three accessible toilets, one of which is fully wheelchair-compliant. Additional regional-focused amenities encompass an onboard for refreshments, dedicated luggage storage areas, upright racks, and real-time passenger information displays for journey updates. With a top operational speed of 130 km/h, the railcars emphasize energy efficiency improvements over the preceding ADH sets through advanced diesel-electric systems and lightweight construction. In January 2025, the PTA announced an additional $80 million investment to procure two more three-car sets from , expanding the fleet to four sets and providing sufficient capacity for up to five daily return services between Perth and Bunbury. These units are engineered for seamless integration with ongoing METRONET infrastructure upgrades, including track enhancements and signaling improvements, to enable higher service frequencies by the late 2020s. The expanded procurement addresses growing regional demand while maintaining the same design standards for consistency across the fleet.

Operations and Performance

Service Patterns and Timetables

Prior to its suspension in November 2023, the Australind operated two return trips daily between Perth and Bunbury, catering primarily to commuter demand during morning and afternoon peaks while accommodating tourist travel off-peak. The morning northbound service typically departed Perth around 6:00 AM, arriving in Bunbury approximately 2 hours and 30 minutes later, with the southbound return leaving Bunbury at about 2:45 PM and reaching Perth by 5:15 PM. These schedules provided an all-stops pattern, serving every intermediate station along the 167 km route without express options. Ticketing for the service was integrated with the SmartRider system, enabling passengers to use the contactless card for standard travel and access concession or free fares where eligible. One-way fares from Perth to Bunbury ranged from approximately $20 to $30, depending on passenger type, with discounts available for families and concessions; no premium classes were offered. Timetables included seasonal adjustments, with amendments applied during public holidays and school holiday periods to account for varying demand. The service was suspended from November 2023 through early 2026 due to upgrades on the , during which replacement road coach services maintained similar daily patterns, including both all-stops and limited-stop options to minimize journey disruptions. Upon resumption in early 2026, the Australind is planned to expand to five return trips per weekday, supported by additional railcars, with potential hourly frequencies during peak hours to better serve commuters. This enhanced timetable will integrate with the completed Byford Rail Extension (opened October 2025) on the , facilitating quicker overall access to central Perth for southbound passengers. The Australind service experienced steady patronage growth in the early , reaching approximately 115,835 passengers in the 2011-12 financial year, before a gradual decline set in amid regional competition from and periodic service disruptions. By 2014-15, annual boardings had fallen to 105,295, continuing to decrease to 89,984 in 2016-17 due to factors including improved access and bus alternatives that drew commuters away from rail. Track upgrades in the mid-, while aimed at enhancing reliability, temporarily impacted usage through closures and delays, contributing to a 6.8% year-on-year drop from 2015-16 to 2016-17. Pre-COVID patronage stabilized around 80,000-90,000 annually, with 83,159 boardings recorded in 2018-19, reflecting a balance between commuter demand and ongoing road competition. The caused a sharp dip, reducing boardings to 70,973 in 2019-20—a 14.7% decline from the prior year—driven by lockdowns, shifts, and health concerns that suppressed regional travel. Recovery was partial, with rebounding to 77,810 in 2022-23 (a 28.6% increase from 60,507 in 2021-22), though still below pre-pandemic levels, as hybrid work patterns and economic pressures limited full restoration. The service's suspension from November 2023 onward for infrastructure upgrades eliminated rail ridership entirely through early 2026, with passengers shifted to replacement road coaches offering discounted fares to maintain connectivity. This period highlighted rail's role in regional mobility, as bus services absorbed demand but faced capacity constraints during peak hours. Looking ahead, the of two additional diesel multiple units in 2025, alongside planned increases to five daily return trips, positions the Australind for growth aligned with Bunbury's expanding population and Peel region's development under broader METRONET initiatives. These enhancements are expected to boost by addressing capacity limits and improving service appeal for commuters and tourists.

References

  1. https://www.transwa.wa.gov.au/plan-your-journey/train-lines/australind
  2. https://transwa.wa.gov.au/home2/australind-service-changes
  3. https://www.wa.gov.au/government/media-statements/Cook%20Labor%20Government/Major-boost-for-Bunbury-and-Peel-region-with-Government-to-procure-two-more-Australind-trains-20250123
  4. https://www.pta.wa.gov.au/our-services/transwa
  5. https://www.transwa.wa.gov.au/about-transwa/transwa-history
  6. https://www.abc.net.au/news/2022-10-23/perth-to-bunbury-fast-rail-business-case-new-study-commissioned/101559344
  7. https://www.wa.gov.au/system/files/2023-09/south-west-bunbury-geographe-report.pdf
  8. https://www.bgcci.com.au/
  9. https://www.peel.wa.gov.au/our-region/
  10. https://swdc.wa.gov.au/regional-profile/
  11. https://www.harveyhistoryonline.com/?p=3187
  12. https://swdc.wa.gov.au/article/transport-infrastructure/
  13. https://www.transwa.wa.gov.au/
  14. https://trove.nla.gov.au/newspaper/article/201839189
  15. http://www.australindfhs.org/wp-content/uploads/2018/01/DEC-2017-SKELETON.pdf
  16. https://www.facebook.com/groups/AustralianRailwaysPastAndPresent/posts/3562614773991275/
  17. https://www.pta.wa.gov.au/about-us/our-role/our-history
  18. https://www.pta.wa.gov.au/portals/0/annualreports/2006/pdfs/PTA_AR06.pdf
  19. https://www.transperth.wa.gov.au/using-transperth/regional-services
  20. https://www.metronet.wa.gov.au/projects/byford-extension
  21. https://www.railexpress.com.au/3-million-for-upgrades-to-australind-line/
  22. https://www.wa.gov.au/government/media-statements/McGowan-Labor-Government/Ageing-Australind-train-taken-out-of-service-for-major-repairs-20201124
  23. https://www.wa.gov.au/government/media-statements/Cook%20Labor%20Government/Joint-media-statement---All-aboard-as-Armadale-Line-reopens-with-services-extending-to-Byford---20251012
  24. https://www.pta.wa.gov.au/news/media-statements/all-aboard-first-c-series-train-ready-for-passengers
  25. https://www.pta.wa.gov.au/Portals/15/AA_DOCUMENTS/Annual%20Reports/PTA%20Annual%20Report%202024_25.pdf?ver=9Idbd1wtCBj-je1G-M8RxA%3D%3D
  26. https://infrastructurepipeline.org/project/metronet
  27. https://kids.kiddle.co/Rail_transport_in_Western_Australia
  28. https://library.dbca.wa.gov.au/FullTextFiles/021927.049.pdf
  29. https://www.railheritagewa.org.au/archive_scans/thumbnails.php?album=18&page=6
  30. https://thewest.com.au/news/wa/bushfire-claims-historic-bridge-ng-ya-223832
  31. https://www.railexpress.com.au/opening-date-announced-for-byford-rail-extension-and-armadale-line/
  32. https://www.transperth.wa.gov.au/Using-Transperth/Station-Facilities/Stations-Maps?sid=1
  33. https://www.transperth.wa.gov.au/about/accessibility
  34. https://inherit.dplh.wa.gov.au/public/inventory/details/fc41f9cc-1269-4638-800f-55141fe6ace7
  35. https://transwa.wa.gov.au/Portals/0/Timetables/2930-200-005%20-%20Australind%20Road%20Coach%20Timetable.pdf?ver=VYoDbCsmZh7OgFqNjqVJow%3D%3D
  36. https://www.transwa.wa.gov.au/passenger-information/accessibility
  37. https://www.hvrheritage.au/w_class.htm
  38. https://collectionswa.net.au/items/eec657f2-4020-4e49-9333-5e035294743f
  39. https://trove.nla.gov.au/newspaper/article/95624863
  40. https://www.railheritagewa.org.au/museum/pages/exhibits.php
  41. https://collectionswa.net.au/items/5dde3067-1b06-4f76-80a6-8c0fd19f9d46
  42. https://www.flickr.com/photos/lwdemery/8607783237
  43. https://www.railexpress.com.au/alstom-to-build-metronet-railcars/
  44. https://www.pta.wa.gov.au/news/media-statements/first-locally-made-train-makes-maiden-journey
  45. https://railway-news.com/new-australind-railcar-design-unveiled/
  46. https://www.railwaypro.com/wp/western-australia-unveils-australind-train-design/
  47. https://www.railway.supply/major-enhancements-for-australind-trains-to-serve-bunbury-and-peel-regions/
  48. https://www.rome2rio.com/Train/Bunbury/Perth
  49. https://www.transregional.wa.gov.au/Tickets-Fares
  50. https://www.pta.wa.gov.au/news/media-statements/discount-fares-for-australind-replacement
  51. https://www.wa.gov.au/government/media-statements/Cook-Labor-Government/Discounted-fares-offered-on-Australind-replacement-20230816
  52. https://www.pta.wa.gov.au/news/media-statements/armadale-line-to-reopen-as-byford-rail-extension-reaches-final-stages
  53. https://www.pta.wa.gov.au/Portals/15/annualreports/2012/report/transwa.html
  54. https://www.parliament.wa.gov.au/publications/tabledpapers.nsf/displaypaper/4010845a860379d3c94e1eec482581b6001662d7/$file/845.pdf
  55. https://www.pta.wa.gov.au/Portals/32/AnnualReport/PTA_Annual_Report_2020.pdf
  56. https://www.pta.wa.gov.au/Portals/15/annualreports/2023/Public%20Transport%20Authority%20Annual%20Report%202022-23.pdf
  57. https://www.bitre.gov.au/sites/default/files/documents/trainline-12.pdf
  58. https://psnews.com.au/wa-government-invests-80-million-in-two-australind-trains/152562/
Add your contribution
Related Hubs
User Avatar
No comments yet.