Hubbry Logo
search button
Sign in
Bulk Richardson number
Bulk Richardson number
Comunity Hub
History
arrow-down
starMore
arrow-down
bob

Bob

Have a question related to this hub?

bob

Alice

Got something to say related to this hub?
Share it here.

#general is a chat channel to discuss anything related to the hub.
Hubbry Logo
search button
Sign in
Bulk Richardson number
Community hub for the Wikipedia article
logoWikipedian hub
Welcome to the community hub built on top of the Bulk Richardson number Wikipedia article. Here, you can discuss, collect, and organize anything related to Bulk Richardson number. The purpose of the hub i...
Add your contribution
Bulk Richardson number

The Bulk Richardson Number (BRN) is an approximation of the Gradient Richardson number.[1] The BRN is a dimensionless ratio in meteorology related to the consumption of turbulence divided by the shear production (the generation of turbulence kinetic energy caused by wind shear) of turbulence. It is used to show dynamic stability and the formation of turbulence.

The BRN is used frequently in meteorology due to widely available radiosonde data and numerical weather forecasts that supply wind and temperature measurements at discrete points in space.[2]

Formula

[edit]

Below is the formula for the BRN, where g is gravitational acceleration, Tv is absolute virtual temperature, Δθv is the virtual potential temperature difference across a layer of thickness, Δz is vertical depth, and ΔU and ΔV are the changes in horizontal wind components across that same layer.[1]

Critical values and interpretation

[edit]

High values indicate unstable and/or weakly-sheared environments; low values indicate weak instability and/or strong vertical shear. Generally, values in the range of around 10 to 50 suggest environmental conditions favorable for supercell development.[3]

In the limit of layer thickness becoming small, the Bulk Richardson number approaches the Gradient Richardson number, for which a critical Richardson number is roughly Ric= 0.25. Numbers less than this critical value are dynamically unstable and likely to become or remain turbulent.[1]

The critical value of 0.25 applies only for local gradients, not for finite differences across thick layers. The thicker the layer is the more likely we are to average out large gradients that occur within small sub-regions of the layer of interest. This results in uncertainty of our prediction of the occurrence of turbulence, and now one must use an artificially large value of the critical Richardson number to give reasonable results using our smoothed gradients. This means that the thinner the layer, the closer the value to the theory.[2]

See also

[edit]

References

[edit]
  1. ^ a b c "Bulk richardson number". AMS Glossary. American Meteorological Society. Retrieved 2015-12-29.
  2. ^ a b Stull, Roland (31 July 1988). An Introduction to Boundary Layer Meteorology. Norwell, MA: Kluwer Academic Publishers. pp. 177–180. ISBN 978-90-277-2769-5.
  3. ^ "Glossary". NOAA National Weather Service. Retrieved 2015-12-29.

Further reading

[edit]