Community hub
0 subscribers8 pages, 0 posts
Recent from talks
All channels
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Contribute something
Welcome to the community hub built to collect knowledge and have discussions related to GER Class G15.
Nothing was collected or created yet.
GER Class G15
View on Wikipediafrom Wikipedia
 | This article relies largely or entirely on a single source. (October 2016) |
| GER Class G15 LNER Class Y6 | |||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 GER Class G15 No. 0125 | |||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||
The GER Class G15 was a class of ten 0-4-0T steam tram locomotives designed by Thomas William Worsdell for the British Great Eastern Railway. Six passed to the London and North Eastern Railway (LNER) at the 1923 grouping, and received the LNER classification Y6.
Overview
[edit]These locomotives had 11-by-15-inch (279 mm × 381 mm) inside cylinders driving 3-foot-1-inch (0.940 m) wheels. They were used on the Wisbech and Upwell Tramway in East Anglia. They were later used elsewhere after being replaced by the more powerful GER Class C53 (LNER Class J70) 0-6-0Ts.
| Year | Order | Manufacturer | Quantity | GER Nos. | LNER Nos. | Notes |
|---|---|---|---|---|---|---|
| 1883–84 | G15 | Stratford Works | 3 | 130, 131, 132 | —, —, 7132 | |
| 1885 | N17 | Stratford Works | 2 | 128, 129 | —, 07129 | |
| 1891–92 | C29 | Stratford Works | 3 | 125, 126, 127 | 07125, 07126, — | |
| 1897 | F40 | Stratford Works | 2 | 133, 134 | 7133, 7134 |
Four were withdrawn before the grouping – 131 in 1907, 130 in 1909, 127 and 128 in 1913. In January 1921, numbers 125, 126 and 129 were placed on the duplicate list, and had their numbers prefixed with a "0" (The original numbers were reused on the 1921-batch of class C53 locomotives).[2] Four more were withdrawn before the 1944 renumbering — 7132 in 1931, 07129 in 1933, 07125 and 07126 in 1940.[3] The remaining two were numbered 8082 (ex-7133) and 8083 (ex-7134). Both survived into British Railways ownership in 1948 and they were numbered 68082 and 68083. The former was withdrawn in 1951, and the latter in 1952.[4] None has been preserved; although 68083 had been earmarked for preservation,[1] it was scrapped after standing in Stratford paintshop for over a year.
The Nene Valley Railway were building a replica of the Y6 class to perform as Toby the Tram Engine for their Day Out with Thomas events. However, when the Rev. W. Awdry died in 1997, the project was ceased halfway through.
Individual locomotives
[edit]| GER No. | 1921 No. | LNER No. | 1946 No. | BR No. | Built | Withdrawn |
|---|---|---|---|---|---|---|
| 130 | — | — | — | — | 1883 | 1909 |
| 131 | — | — | — | — | 1883 | 1907 |
| 132 | 7132 | — | — | 1883 | 1931 | |
| 128 | — | — | — | — | 1885 | 1913 |
| 129 | 0129 | 07129 | — | — | 1885 | 1933 |
| 125 | 0125 | 07125 | — | — | 1891 | 1940 |
| 126 | 0126 | 07126 | — | — | 1892 | 1940 |
| 127 | — | — | — | — | 1892 | 1913 |
| 133 | 7133 | 8082 | 68082 | 1897 | 1951 | |
| 134 | 7134 | 8083 | 68083 | 1897 | 1952 | |
References
[edit]Notes
[edit]- ^ a b Aldrich 1969, p. 109
- ^ Boddy et al. 1977, p. 90.
- ^ Boddy et al. 1977, p. 93.
- ^ Aldrich 1969, p. 110
- ^ Boddy et al. 1977, pp. 90–93.
Bibliography
[edit]- Aldrich, C. Langley (1969). The Locomotives of the Great Eastern Railway 1862–1962 (7th ed.). Wickford, Essex: C. Langley Aldrich. OCLC 30278831.
- Boddy, M.G.; Brown, W.A.; Fry, E.V.; Hennigan, W.; Hoole, Ken; Manners, F.; Neve, E.; Platt, E.N.T.; Proud, P.; Yeadon, W.B. (June 1977). Fry, E.V. (ed.). Locomotives of the L.N.E.R., part 9B: Tank Engines - Classes Q1 to Z5. Kenilworth: RCTS. ISBN 0-901115-41-X.
External links
[edit]- G15 Class 0-4-0T 1883-1897 — Great Eastern Railway Society
- The Y6 (GER G15) 0-4-0 Tram Engines — LNER Encyclopedia
GER Class G15
View on Grokipediafrom Grokipedia
The GER Class G15 was a class of ten 0-4-0T steam tram locomotives designed by T. W. Worsdell for the Great Eastern Railway, introduced between 1883 and 1897 primarily for freight operations on the Wisbech and Upwell Tramway and other public road-running services such as those at Great Yarmouth Docks and Lowestoft Harbour.[1][2]
These inside-cylinder tank engines featured a distinctive double-ended cab design with wooden bodies, cow-catchers for road use, enclosed running gear to protect against public hazards, speed governors limited to 8 mph on tramways (with a maximum of 25 mph), and warning bells, adhering to Board of Trade requirements for tram operations.[1][3] Their technical specifications included 11-inch by 15-inch cylinders driving 3-foot-1-inch wheels, a boiler pressure of 120 psi (increased to 140 psi on later examples with new boilers fitted between 1898 and 1906), a total heating surface of approximately 350 square feet, a grate area of 7 square feet, a tractive effort of 5,837 pounds, a weight of 21 tons 5 hundredweight when fully loaded, water capacity of 500 gallons, and coal capacity of 10 hundredweight.[2][3] All ten were constructed at the GER's Stratford Works, numbered 125 to 134, and proved reliable for hauling goods like coal, fish, and sugar beet on light-rail infrastructure shared with road traffic.[1][2]
Upon the 1923 Grouping, the class passed to the London and North Eastern Railway as the Y6 subclass, retaining their original roles until gradual replacement by more modern J70-class petrol trams from 1903 onward; by 1913, most had been withdrawn or repurposed, though two survived into British Railways ownership as numbers 68082 and 68083, operating until final withdrawal in 1951 and 1952 respectively, with the first scrapping occurring in 1907.[1][2] No examples were preserved, but the class's quaint, boxy appearance and tramway heritage directly inspired the character of Toby the Tram Engine in Rev. W. Awdry's The Railway Series books, which later formed the basis for the Thomas the Tank Engine series.[1][2]
Background and Design
Development Context
The Wisbech and Upwell Tramway was constructed by the Great Eastern Railway (GER) as a rural standard gauge line in East Anglia, primarily to facilitate the transport of agricultural produce such as fruit and vegetables to markets in London and the Midlands, alongside limited passenger services.[4] Authorized under the Tramways Act 1870 and revived by the GER in 1882 following earlier lapsed proposals, the tramway opened in stages: the initial 4 miles 10 chains from Wisbech to Outwell Basin on 20 August 1883, with the final extension of 1 mile 62 chains to Upwell following on 8 September 1884.[4] Designed for light freight and passenger traffic, it operated at restricted speeds with frequent ungated level crossings along public roads, requiring motive power that prioritized safety and maneuverability over high performance.[4][5] Thomas William Worsdell, appointed Locomotive Superintendent and Chief Mechanical Engineer of the GER in 1881, recognized the need for specialized locomotives to meet these operational demands and Board of Trade regulations for tramways.[6] In 1883, as the tramway prepared for opening, Worsdell designed a class of 0-4-0T steam tram engines, classified as G15, incorporating inside cylinders and a compact layout to handle the line's sharp curves and numerous road crossings without endangering public safety.[1][2] These features, including cow-catchers, enclosed motion, speed governors, and warning bells, ensured compliance with tramway acts while enabling reliable service on the roadside reservation.[1] The initial batch of three G15 locomotives was constructed at Stratford Works in 1883 specifically for the tramway's launch, providing the necessary power for the six daily passenger and mixed freight workings.[2] Their proven effectiveness in handling the growing volume of perishable goods traffic led to further production: two additional units in 1885 for the related Yarmouth Union Tramway, and five more between 1891 and 1897 to accommodate increased demands on the Wisbech and Upwell line, bringing the class total to ten.[2][1] This expansion reflected the tramway's success as a feeder route, though the locomotives remained optimized for low-speed, light-duty operations rather than mainline haulage.[2]Key Design Features
The GER Class G15 locomotives adopted a 0-4-0T wheel arrangement with 3 ft 1 in (0.94 m) driving wheels, optimized for low-speed hauling on the undulating tracks of the Wisbech and Upwell Tramway, where gradients and street-running conditions demanded high adhesion and maneuverability without leading or trailing wheels.[2][7] This compact configuration, combined with inside cylinders measuring 11 in × 15 in (279 mm × 381 mm) positioned between the frames, minimized the overall width to fit within the restrictive clearances of tramway infrastructure while maintaining structural integrity.[2][3] Stephenson valve gear was employed for efficient steam distribution in these confined spaces, ensuring reliable operation at the regulated speeds of 8 mph (13 km/h) imposed by tramway rules.[7] To facilitate bidirectional operation without the need for turning facilities on the linear tramway routes, the G15 featured dual cabs at both ends, allowing drivers to control the locomotive from either direction with duplicated controls on both sides.[2][1] The wooden bodywork provided weather protection for crew and complied with the aesthetic and safety requirements of the 1870 Tramways Act, while heavy steel side aprons and cowcatchers enclosed moving parts to prevent hazards to pedestrians and comply with street-running regulations; a governor and warning bell were also fitted as Board of Trade mandates.[1][3] The boiler was a conventional butt-jointed two-plate design with a raised firebox, initially rated at 120 lbf/in² (830 kPa) but upgraded to 140 lbf/in² (965 kPa) in later builds and rebuilds for improved quick steaming suited to short-haul duties.[3][2] Water capacity was limited to 500 imperial gallons (2,270 L), carried in low side tanks slung along the frames to form the 'floor' and maintain a low center of gravity for stability on uneven tracks, while the coal bunker held 10 long hundredweight (0.5 t), enabling frequent refueling at tramway sidings without excessive onboard weight.[2][1] Safety valves discharged into the well tank to reduce noise, further adapting the design to urban tram environments.[2]Technical Specifications
Dimensions and Weight
The GER Class G15 locomotives measured 20 ft 2½ in in overall length, dimensions tailored to comply with the restricted clearances of the tramways on which they operated.[2] These compact proportions facilitated operation on light railways like the Wisbech and Upwell Tramway, where space constraints demanded a low-profile design. The standard gauge was 4 ft 8½ in (1,435 mm), with a UIC wheel arrangement classification of Bn2t reflecting the 0-4-0 tank configuration.[7] The locomotives weighed 21 long tons 5 cwt (47,600 lb or 21.6 t) in working order, a distribution achieved through the tenderless design that evenly loaded the four driving wheels without additional trailing or leading axles.[2] The driving wheels had a diameter of 3 ft 1 in (0.940 m), while the inside cylinders featured a bore of 11 in and stroke of 15 in (279 mm × 381 mm), contributing to the balanced weight profile essential for adhesion on lightly laid tramway tracks.[7] Side tanks provided a water capacity of 500 imp gal (2,270 L), sufficient for short-haul duties typical of tram operations. Fuel capacity was 10 cwt of coal, stored in bunkers integrated into the frame to maintain the locomotive's streamlined silhouette and minimize overhangs.[2]Power and Performance
The GER Class G15 locomotives featured boilers with a working pressure of 140 lbf/in² (0.97 MPa) after upgrades from the original 120 psi configuration, enabling reliable power generation for tramway duties.[8] The firebox, with a grate area of 7.01 sq ft (0.65 m²), was proportioned to deliver sustained low-speed power output, prioritizing steady steaming over high-intensity bursts to match the demands of frequent stops and level track operations. Total heating surface was 349 sq ft (32.4 m²), comprising 43 sq ft in the firebox and 306 sq ft in the tubes.[2] Tractive effort stood at 5,837 lbf (25.96 kN), a key metric for starting loads on the light-rail infrastructure.[2][8] Operational speeds were capped at 10 mph by tramway regulations under the 1870 Tramways Act, though the locomotives' governors limited them to around 8 mph in practice for safety on shared road alignments. Their power profile was optimized for hauling 10-15 ton freight or passenger loads over the 7.5-mile Wisbech & Upwell route, ensuring reliable performance without excessive strain on the infrastructure.[1][8]Operational History
Introduction to Service
The GER Class G15 locomotives were specifically designed for tramway operations on public roads, featuring dual cabs and safety features to comply with the Tramways Act.[2] The first three of these 0-4-0T steam tram engines (Nos. 125–127) entered service in 1883, coinciding with the opening of the Wisbech and Upwell Tramway to Outwell Basin on 20 August 1883, with the extension to Upwell following on 8 September 1884.[4] Two additional locomotives (Nos. 128–129) were built the same year for the Yarmouth Union tramway. These initial locomotives handled mixed freight and passenger duties, transporting agricultural produce such as sugar beets alongside local passengers along the rural route.[9] As traffic on the tramway expanded rapidly—reaching 3,000 passengers per week by October 1884—an additional five locomotives (Nos. 130–134) were constructed between 1891 and 1897 to meet growing demand.[4] These engines operated up to six passenger trains daily in each direction during peak periods, with journeys taking approximately one hour at a restricted speed of 8 mph.[10] Freight services complemented this, focusing on seasonal goods like vegetables and coal, supporting the local economy in East Anglia.[9] Daily routines involved shunting maneuvers at Wisbech and Upwell stations to assemble and disassemble trains, often requiring the locomotives to run cab-forward using their dual-end controls for better visibility at road crossings and level changes.[1] Equipped with cowcatchers, side skirts, and warning bells, the G15 class ensured safe passage on shared roadways, adhering to Board of Trade regulations for tram operations.[2]Later Operations and Replacements
Upon the formation of the London and North Eastern Railway (LNER) in 1923, the ten GER Class G15 locomotives were absorbed and classified as Y6, receiving numbers 7125–7134 by prefixing a '7' to their original GER identities.[2] They continued to operate primarily on the Wisbech and Upwell Tramway, where passenger services ceased in 1927 amid declining demand, shifting focus to seasonal freight workings such as fruit traffic.[2] Several received modifications in the late 1920s, including the fitting of boilers from withdrawn J70 class locomotives (derived from the earlier GER C53; originally designed for 180 psi but derated to 140 psi to improve reliability on light duties).[2] By the 1930s, the Y6 class saw reduced utilization on the tramway following the introduction of more efficient geared steam locomotives like the Y10 "Super Sentinel" in 1930, which handled heavier loads with lower coal consumption.[2] Two Y6 locomotives (Nos. 7133 and 7134) were loaned to the Wissington Light Railway in 1941, and No. 7134 saw further wartime service with the U.S. Army before returning in 1944.[2] Under British Railways (BR) from 1948, the surviving pair—renumbered 68082 and 68083 in the 0F classification—continued light shunting duties on the tramway into the early 1950s, while eight of the class had been withdrawn by 1933 (four between 1909 and 1913, and two more in 1931–1933).[2] The class's phase-out was driven by the broader dieselization of branch lines; in 1952, BR introduced Class 04 Drewry diesel shunters on the Wisbech and Upwell, replacing all steam operations including the Y6 and J70 locomotives, with the last Y6 service recorded that July.[9] Track upgrades and the inefficiency of steam on low-traffic rural routes further hastened withdrawals, culminating in both survivors being retired by the end of 1952, though No. 68083 lingered briefly in storage until scrapping in 1953.[2]Locomotive Details
Construction and Numbers
The ten locomotives of the GER Class G15 were constructed entirely at the Great Eastern Railway's Stratford Works between 1883 and 1897. This in-house building process utilized standardized GER components, such as boilers and frames common to other classes, to achieve cost efficiency and rapid assembly while adhering to the specific requirements for tramway operation under the 1870 Tramways Act.[1] The class was built in three batches: an initial batch of three locomotives in 1883, followed by two in 1885, and a final batch of five between 1891 and 1897. They were numbered 125 to 134 throughout their GER service, with no major renumbering. During the First World War duplicate list, Nos. 125, 126, and 129 were temporarily prefixed with a '0'.[2][11] Upon the formation of the London and North Eastern Railway in 1923, the six surviving locomotives were classified as Y6 and renumbered by prefixing a '7' to their GER numbers (7125–7134), except Nos. 125, 126, and 129 which became 07125, 07126, and 07129 respectively. The two locomotives still in service by 1946 were renumbered 9092 and 9093. Following nationalization in 1948, British Railways assigned numbers 68082 (ex-GER 133) and 68083 (ex-GER 134) to the remaining engines in service on the Wisbech and Upwell Tramway.[2]| Batch | Build Years | GER Numbers |
|---|---|---|
| First | 1883 | 125–127 |
| Second | 1885 | 128–129 |
| Third | 1891–1897 | 130–134 |
Individual Fates
Six of the class survived to join the LNER in 1923, but were gradually withdrawn as more modern J70-class (ex-C53) locomotives took over. Most were scrapped at Stratford Works due to age, boiler issues, or obsolescence. The last two operated into the British Railways era on the Wisbech and Upwell Tramway until 1951 and 1952.[2][1] BR 68082 (ex-GER 133, ex-LNER 7133/9092) was withdrawn in November 1951 following long service on tramways and docks, and scrapped at Stratford Works. BR 68083 (ex-GER 134, ex-LNER 7134/9093) was withdrawn in November 1952 after a brief consideration for preservation; it was ultimately scrapped at Stratford Works after standing idle.[12][1]| GER No. | Build Date | LNER No. | BR No. | Withdrawal Date | Scrapping Location | Notes |
|---|---|---|---|---|---|---|
| 125 | 1883 | 07125 | - | 1943 | Stratford Works | Withdrawn during WWII; duplicate list numbering. |
| 126 | 1883 | 07126 | - | 1943 | Stratford Works | Withdrawn during WWII; duplicate list numbering. |
| 127 | 1883 | 7127 | - | 1913 | Stratford Works | Early withdrawal; used on tramways. |
| 128 | 1885 | 7128 | - | 1913 | Stratford Works | Withdrawn alongside 127; obsolescence. |
| 129 | 1885 | 07129 | - | 1933 | Stratford Works | Withdrawn from service; duplicate list. |
| 130 | 1891 | 7130 | - | 1909 | Stratford Works | Early withdrawal due to age. |
| 131 | 1892 | 7131 | - | 1907 | Stratford Works | First of class withdrawn; boiler issues. |
| 132 | August 1883 | 7132 | - | October 1931 | Stratford Works | Withdrawn from King's Lynn MPD; long service on tramways and docks. |
| 133 | 1897 | 7133 / 9092 | 68082 | November 1951 | Stratford Works | Last active on Wisbech and Upwell Tramway; no preservation. |
| 134 | August 1897 | 7134 / 9093 | 68083 | November 1952 | Stratford Works | Withdrawn after WWII service; briefly considered for preservation but scrapped. |