Community hub
Recent from talks
Knowledge base stats:
Talk channels stats:
Members stats:
Minnesota State Highway 100
Minnesota State Highway 100 (MN 100) is a state highway in the Twin Cities region of Minnesota, which runs from its interchange with Interstate 494 (I-494) in Bloomington and continues north to its northern terminus at its interchange with I-694 in Brooklyn Center. The southern end of MN 100 continues in Bloomington as Normandale Boulevard (County Road 34, CR 34). At the north end, the main line of MN 100 merges with I-694 in Brooklyn Center. The route is 16 miles (26 km) in length.
MN 100 serves as a north–south arterial route in the western suburbs of the Twin Cities. The roadway serves the communities of Bloomington, Edina, St. Louis Park, Golden Valley, Crystal, Robbinsdale and Brooklyn Center. MN 100 is constructed to freeway standards. The route is located in Hennepin County.
The route was authorized in 1934. MN 100 was originally meant as a beltway around the Twin Cities (presumably the reason for the round number) and actually achieved that status for about 20 years in the mid-20th century (although it wasn't a full freeway).
All of the current MN 100 was also in the original route. Starting from the current southern terminus, Old MN 100 was concurrent eastward with a pre-I-494 MN 5 past the Minneapolis-Saint Paul International Airport to its intersection with MN 55. Old MN 100 then continued east concurrent with MN 55 over the Mendota Bridge, then along current MN 62 through Mendota Heights, then MN 100 went on Southview Boulevard into South St. Paul. Then old MN 100 followed Grand Avenue downhill, until it met old MN 56 on Concord Street. Then old MN 100 followed south on Concord Street into Inver Grove Heights, then east over the railroad bridge into Newport; and then turning north onto Century Avenue in Woodbury, which feeds into current MN 120 north of I-94 in Maplewood / Oakdale. Old MN 100 then turned west upon County Road F and north along White Bear Avenue to meet up with and concurrent westward with old MN 96 (the section of which is now County Rd 96 in Vadnais Heights and Shoreview). Old MN 100 then turned south briefly along U.S. Highway 8 (US 8, now a city maintained street in New Brighton), then old MN 100 carried on westward along the current routing of I-694 through New Brighton and Fridley to meet back at its present-day northern terminus at Brooklyn Center.
Due to traffic pattern changes over the years, it is no longer possible to directly follow the path of old MN 100. Small detours are necessary which involve the use of exits 40 and 60 of the present I-494/I-694 beltway.
The original construction of MN 100 started in 1935, as a New Deal project. The project was a cooperative venture between the Works Progress Administration (WPA) and the Minnesota Highway Department, and was the largest WPA project in the state. The demand for the highway came out of growing pains in the Twin Cities during the 1920s, when Minneapolis city streets were congested and suburban roads were poorly maintained dirt roads. The plan for a beltway around the Twin Cities incorporated existing roads, both paved and unpaved. A new section of highway, between MN 5 (now I-494 and MN 5) in Edina and then-US 52 (now CR 81) in Robbinsdale was needed to complete the beltway. As such, it was planned as a state-of-the-art highway, with two lanes in each direction separated by wide medians, bridges at major intersections and railroad crossings, and the first cloverleaf interchanges in Minnesota.
Carl Graeser, the highway engineer and Arthur R. Nichols, a landscape architect, teamed up to design the highway. A large number of WPA workers worked on the construction of the highway. Since the WPA was designed to keep a large number of workers busy, a lot of hand digging was done as opposed to using bulldozers. Cloverleaf interchanges were built at MN 7, US 12 (now I-394 and US 12) and MN 55 (Olson Highway).
The landscaping of the highway was meant to give the highway a parkway-like experience. As such, it was built with a wider right-of-way than the typical highway. The Golden Valley Garden Club supported efforts to plant lilacs along the highway and the Minneapolis Journal coined the name "Lilac Way". Eventually, 7,000 lilacs were planted. In addition, the builders built five wayside parks along the way. These parks were intended for picnicking and featured stone picnic tables, beehive barbecues, waterfalls and so on. These fixtures provided work for local stonemasons, as another part of the WPA project. The western leg was completed in 1940, but further construction on the beltway was halted with the United States' entry into World War II. An extension from then-US 52 (now CR 81) in Robbinsdale to US 10 (near present-day I-35W) in New Brighton was built with federal aid to provide access to industrial areas as an asset to the manufacture of "essential war materials".
Hub AI
Minnesota State Highway 100 AI simulator
(@Minnesota State Highway 100_simulator)
Minnesota State Highway 100
Minnesota State Highway 100 (MN 100) is a state highway in the Twin Cities region of Minnesota, which runs from its interchange with Interstate 494 (I-494) in Bloomington and continues north to its northern terminus at its interchange with I-694 in Brooklyn Center. The southern end of MN 100 continues in Bloomington as Normandale Boulevard (County Road 34, CR 34). At the north end, the main line of MN 100 merges with I-694 in Brooklyn Center. The route is 16 miles (26 km) in length.
MN 100 serves as a north–south arterial route in the western suburbs of the Twin Cities. The roadway serves the communities of Bloomington, Edina, St. Louis Park, Golden Valley, Crystal, Robbinsdale and Brooklyn Center. MN 100 is constructed to freeway standards. The route is located in Hennepin County.
The route was authorized in 1934. MN 100 was originally meant as a beltway around the Twin Cities (presumably the reason for the round number) and actually achieved that status for about 20 years in the mid-20th century (although it wasn't a full freeway).
All of the current MN 100 was also in the original route. Starting from the current southern terminus, Old MN 100 was concurrent eastward with a pre-I-494 MN 5 past the Minneapolis-Saint Paul International Airport to its intersection with MN 55. Old MN 100 then continued east concurrent with MN 55 over the Mendota Bridge, then along current MN 62 through Mendota Heights, then MN 100 went on Southview Boulevard into South St. Paul. Then old MN 100 followed Grand Avenue downhill, until it met old MN 56 on Concord Street. Then old MN 100 followed south on Concord Street into Inver Grove Heights, then east over the railroad bridge into Newport; and then turning north onto Century Avenue in Woodbury, which feeds into current MN 120 north of I-94 in Maplewood / Oakdale. Old MN 100 then turned west upon County Road F and north along White Bear Avenue to meet up with and concurrent westward with old MN 96 (the section of which is now County Rd 96 in Vadnais Heights and Shoreview). Old MN 100 then turned south briefly along U.S. Highway 8 (US 8, now a city maintained street in New Brighton), then old MN 100 carried on westward along the current routing of I-694 through New Brighton and Fridley to meet back at its present-day northern terminus at Brooklyn Center.
Due to traffic pattern changes over the years, it is no longer possible to directly follow the path of old MN 100. Small detours are necessary which involve the use of exits 40 and 60 of the present I-494/I-694 beltway.
The original construction of MN 100 started in 1935, as a New Deal project. The project was a cooperative venture between the Works Progress Administration (WPA) and the Minnesota Highway Department, and was the largest WPA project in the state. The demand for the highway came out of growing pains in the Twin Cities during the 1920s, when Minneapolis city streets were congested and suburban roads were poorly maintained dirt roads. The plan for a beltway around the Twin Cities incorporated existing roads, both paved and unpaved. A new section of highway, between MN 5 (now I-494 and MN 5) in Edina and then-US 52 (now CR 81) in Robbinsdale was needed to complete the beltway. As such, it was planned as a state-of-the-art highway, with two lanes in each direction separated by wide medians, bridges at major intersections and railroad crossings, and the first cloverleaf interchanges in Minnesota.
Carl Graeser, the highway engineer and Arthur R. Nichols, a landscape architect, teamed up to design the highway. A large number of WPA workers worked on the construction of the highway. Since the WPA was designed to keep a large number of workers busy, a lot of hand digging was done as opposed to using bulldozers. Cloverleaf interchanges were built at MN 7, US 12 (now I-394 and US 12) and MN 55 (Olson Highway).
The landscaping of the highway was meant to give the highway a parkway-like experience. As such, it was built with a wider right-of-way than the typical highway. The Golden Valley Garden Club supported efforts to plant lilacs along the highway and the Minneapolis Journal coined the name "Lilac Way". Eventually, 7,000 lilacs were planted. In addition, the builders built five wayside parks along the way. These parks were intended for picnicking and featured stone picnic tables, beehive barbecues, waterfalls and so on. These fixtures provided work for local stonemasons, as another part of the WPA project. The western leg was completed in 1940, but further construction on the beltway was halted with the United States' entry into World War II. An extension from then-US 52 (now CR 81) in Robbinsdale to US 10 (near present-day I-35W) in New Brighton was built with federal aid to provide access to industrial areas as an asset to the manufacture of "essential war materials".