Hubbry Logo
Nile blueNile blueMain
Open search
Nile blue
Community hub
Nile blue
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Nile blue
Nile blue
Nile blue
View on Wikipedia
from Wikipedia
Nile blue
Names
IUPAC name
[9-(diethylamino)benzo[a]phenoxazin-5-ylidene]azanium sulfate
Other names
Nile blue A, Nile blue sulfate
Identifiers
3D model (JSmol)
ChEMBL
ChemSpider
ECHA InfoCard 100.020.757 Edit this at Wikidata
UNII
  • InChI=1S/C20H21N3O/c1-3-23(4-2)13-9-10-17-18(11-13)24-19-12-16(21)14-7-5-6-8-15(14)20(19)22-17/h5-13H,3-4,21H2,1-2H3 checkY
    Key: WOIORDFNOALMFO-UHFFFAOYSA-N checkY
  • InChI=1/C20H21N3O/c1-3-23(4-2)13-9-10-17-18(11-13)24-19-12-16(21)14-7-5-6-8-15(14)20(19)22-17/h5-13H,3-4,21H2,1-2H3
    Key: WOIORDFNOALMFO-UHFFFAOYAF
  • N=1c3c(OC=2C=1\C=C/C(N(CC)CC)C=2)cc(c4c3cccc4)N
Properties
C20H20ClN3O
Molar mass 353.845 g/mol
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

Nile blue (or Nile blue A) is a stain used in biology and histology. It may be used with live or fixed cells, and imparts a blue colour to cell nuclei.

It may also be used in conjunction with fluorescence microscopy to stain for the presence of polyhydroxybutyrate granules in prokaryotic or eukaryotic cells. Boiling a solution of Nile blue with sulfuric acid produces Nile red (Nile blue oxazone).

Nile blue hydrochloride in water.
Concentrations, left to right: 1000 ppm, 100 ppm, 10 ppm, 1 ppm, 100 ppb.
Nile blue in water.
Left to right: pH 0, pH 4, pH 7, pH 10, pH 14.
Nile blue in water (lower phase) and ethyl acetate (upper phase) in daylight.
Left to right: pH 0, pH 4, pH 7, pH 10, pH 14
Nile blue in water (lower phase) and ethyl acetate (upper phase) in UV light (366 nm).
Left to right: pH 0, pH 4, pH 7, pH 10, pH 14
Nile blue (free base) in daylight (top row) and UV light (366 nm, bottom row) in different solvents.
Left to right: 1. methanol, 2. ethanol, 3. methyl-tert-butylether, 4. cyclohexane, 5. n-hexane, 6. acetone, 7. tetrahydrofuran, 8. ethyl acetate, 9. dimethyl formamide, 10. acetonitrile, 11. toluene, 12. chloroform

Chemical and physical properties

[edit]

Nile blue is a fluorescent dye. The fluorescence shows especially in nonpolar solvents with a high quantum yield.[1]

The absorption and emission maxima of Nile blue are strongly dependent on pH and the solvents used:[1]

Solvent Absorption λ max (nm) Emission λ max (nm)
Toluene 493 574
Acetone 499 596
Dimethylformamide 504 598
Chloroform 624 647
1-Butanol 627 664
2-propanol 627 665
Ethanol 628 667
Methanol 626 668
Water 635 674
1.0 M hydrochloric acid (pH = 1.0) 457 556
0.1 M sodium hydroxide solution (pH = 11.0) 522 668
Ammonia water (pH = 13.0) 524 668

The duration of Nile blue fluorescence in ethanol was measured as 1.42 ns. This is shorter than the corresponding value of Nile red with 3.65 ns. The fluorescence duration is independent on dilution in the range 10−3 to 10−8 mol/L.[1]

Nile blue staining

[edit]

Nile blue is used for histological staining of biological preparations. It highlights the distinction between neutral lipids (triglycerides, cholesteryl esters, steroids) which are stained pink and acids (fatty acids, chromolipids, phospholipids) which are stained blue.[2]

The Nile blue staining, according to Kleeberg, uses the following chemicals:

Workflow

[edit]

The sample or frozen sections is/are fixated in formaldehyde, then immersed for 20 minutes in the Nile blue solution or 30 sec in nile blue A (1% w/v in distilled water) and rinsed with water. For better differentiation, it is dipped in 1% acetic acid for 10–20 minutes or 30 sec until the colors are pure. This might take only 1–2 minutes. Then the sample is thoroughly rinsed in water (for one to two hours). Afterwards, the stained specimen is taken on a microscope slide and excess water is removed. The sample can be embedded in glycerol or glycerol gelatin.

Results

[edit]

Unsaturated glycerides are pink, nuclei and elastins are dark, fatty acids and various fatty substances and fat mixtures are purple blue.[3]

Example: Detection of poly-β-hydroxybutyrate granules (PHB)

[edit]

The PHB granules in the cells of Pseudomonas solanacearum can be visualized by Nile blue A staining. The PHB granules in the stained smears are observed with an epifluorescence microscope under oil immersion, at a 1000 times magnification; under 450 nm excitation wavelength they show a strong orange fluorescence.[4]

Nile blue in DNA Electrophoresis

[edit]

Nile blue is also used in a variety of commercial DNA staining formulations used for DNA electrophoresis.[5] As it does not require UV trans-illumination in order to be visualised in an agarose gel as with ethidium bromide, it can be used to observe DNA as it is separated and also as a dye to aid in gel-extraction of DNA fragments without incurring damage by UV-irradiation.

Nile blue in oncology

[edit]

Derivatives of Nile blue are potential photosensitizers in photodynamic therapy of malignant tumors. These dyes aggregate in the tumor cells, especially in the lipid membranes, and/or are sequestered and concentrated in subcellular organelles.[6]

With the Nile blue derivative N-ethyl-Nile blue (EtNBA), normal and premalignant tissues in animal experiments can be distinguished by fluorescence spectroscopy in fluorescence imaging. EtNBA shows no phototoxic effects.[7]

Synthesis

[edit]

Nile Blue and related naphthoxazinium dyes can be prepared by acid-catalyzed condensation of either 5-(dialkylamino)-2-nitrosophenols with 1-naphthylamine, 3-(dialkylamino)phenols with N-alkylated 4-nitroso-1-naphtylamines, or N,N-dialkyl-1,4-phenylenediamines with 4-(dialkylamino)-1,2-naphthoquinones. Alternatively, the product of an acid-catalyzed condensation of 4-nitroso-N,N-dialkylaniline with 2-naphthol (a salt of 9-(dialkylamino)benzo[a]phenoxazin-7-ium) can be oxidized in the presence of an amine, installing a second amino substituent in 5-position of the benzo[a]phenoxazinium system.[8] The following scheme illustrates the first of these four approaches, leading to Nile Blue perchlorate:

Nile Blue perchlorate synthesis
Nile Blue perchlorate synthesis

References

[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Nile blue

View on Grokipedia
from Grokipedia
Nile blue is a synthetic fluorescent belonging to the benzophenoxazine family, widely used in and as a for cellular components such as and lysosomes. It imparts a blue color to proteins while staining lipid droplets red in and yellow-gold under , enabling visualization in both fixed and live cells; it also stains nuclei blue. Its high photostability, strong fluorescence quantum yields, and sensitivity to environmental factors like and polarity make it a versatile probe for imaging and biophysical studies. Chemically, Nile blue A—the most common form—exists as a cationic species with the formula C20_{20}H19_{19}N3_{3}O+^{+}, often encountered as salts such as the chloride (C20_{20}H20_{20}ClN3_{3}O) or sulfate. The dye's structure features a fused phenoxazine ring system with amino and diethylamino substituents, contributing to its red-emissive fluorescence (excitation around 550–630 nm, emission 650–700 nm) and solvatochromic behavior, where spectral shifts reflect local hydrophobicity or polarity. These properties arise from its planar, conjugated system, which allows intercalation or binding to hydrophobic environments like lipid membranes. Beyond traditional staining, Nile blue derivatives serve as scaffolds for advanced probes in and mitochondrial targeting, owing to their low and resistance to . They have also been used for detection of biomolecular structures like DNA. In muscle and research, it highlights neutral lipid accumulations as fluorescent droplets, aiding diagnosis and mechanistic studies. Its role extends to pH-sensitive indicators and polarity sensors , underscoring its enduring utility in cellular and molecular biology despite the advent of newer fluorophores.

Chemical Structure and Properties

Molecular Formula and Structure

Nile blue A, commonly referred to as Nile blue, is typically encountered as its chloride salt with the molecular formula C20_{20}H20_{20}ClN3_{3}O and a molecular weight of 353.85 g/mol. The free base form corresponds to the cation C20_{20}H19_{19}N3_{3}O+^{+}, with a molecular weight of 317.38 g/mol. Structurally, Nile blue features a benzophenoxazine core, consisting of a phenoxazine ring system fused to a moiety, which imparts its characteristic chromophoric properties. At position 9, it bears a diethylamino group (-N(CH2_{2}CH3_{3})2_{2}), while position 5 has an amino group, and the central in the phenoxazine ring carries a positive charge, forming the 7-ium ion in its cationic form; the full systematic name is 5-amino-9-(diethylamino)benzophenoxazin-7-ium . This tricyclic aromatic scaffold with electron-donating substituents enables its use as a fluorescent probe. Nile blue is classified as a synthetic cationic fluorescent within the oxazine family of dyes, specifically a 9-amino-substituted benzophenoxazinium . Its ionization state is -dependent, with a pKa_{a} of 9.7, leading to color shifts from blue at lower to purple-red at higher due to / of the amino group at position 5, which influences its as well.

Physical and Spectroscopic Properties

Nile blue, typically encountered as its chloride salt, is a crystalline solid that appears as a dark green to powder. It exhibits limited in , approximately 1 mg/mL, resulting in an opaque solution, while demonstrating high solubility in organic solvents such as and DMSO (up to 150 mg/mL in the latter). The of the chloride salt is greater than 300 °C, where it decomposes rather than . Spectroscopically, Nile blue displays characteristic absorption and properties that underpin its utility as a . In , it has an absorption maximum at 635 nm, imparting a color, and an emission maximum at 674 nm when excited in the visible range. The quantum yield is approximately 0.27 in , with a lifetime of 1.42 ns under the same conditions. Nile blue exhibits pronounced solvatochromism, with absorption and emission shifting from 473 nm (absorption) and 546 nm (emission) in nonpolar solvents like n-hexane to the longer wavelengths observed in polar media like . The dye's optical behavior is also sensitive to environmental factors. is prominent at pH values above 7 but diminishes significantly below pH 5 due to effects that quench emission. Additionally, absorption spectra show thermochromic shifts, with modest red shifts observed upon increasing temperature in solution, reflecting changes in molecular interactions.

History and Synthesis

Discovery and Development

Nile , a phenoxazine-based dye, was first synthesized in 1896 by German chemists Richard Möhlau and Karl Uhlmann during investigations into oxazine and phenoxazine derivatives for coloring applications. Their work involved the of nitrosodiethylaniline with 1-naphthylamine, yielding the compound now known as Nile A, initially valued for its vibrant hue on fabrics like and . This synthesis marked an early advancement in synthetic organic dyes, building on the burgeoning field of azo and oxazine colorants that revolutionized the in the late . The dye's transition to biological applications began in the early , with its introduction as a histological stain by British pathologist James Lorrain Smith in 1911. Smith developed a method using Nile blue sulfate to differentiate neutral , such as triglycerides, which stain red, from free fatty acids staining blue, enabling precise visualization of components in tissue sections. This innovation expanded the dye's utility beyond textiles, establishing it as a tool in and for detecting lipophilic structures in biological samples. By the , refinements in staining protocols further promoted its adoption in , particularly for detection in cellular preparations, though specific milestones like those explored by contemporaries built on Smith's foundational technique. Commercially, Nile blue was initially marketed by European dye manufacturers for industrial uses, with production shifting to American firms like those in the dye sector following disruptions. Post-World War II, its inherent properties—emitting in the red spectrum under excitation—drove its evolution into a biomedical tool, as researchers leveraged these traits for enhanced imaging in fluorescence microscopy. Key publications in the , such as Ralph D. Lillie's work on Nile blue for distinguishing melanins and lipofuscins, underscored its growing role in histochemistry, solidifying its place in scientific applications by mid-century.

Synthetic Methods

The classical synthesis of Nile blue proceeds via acid-catalyzed condensation of 1-naphthylamine with N,N-diethyl-4-nitrosoaniline, leading to an intermediate that cyclizes to the phenoxazinium core, followed by formation of the salt. This reaction, originally reported by Möhlau and Uhlmann in 1896, typically employs concentrated hydrochloric or as the catalyst in or acetic acid solvent. The mixture is refluxed at 80–100 °C for 2–4 hours, with the group facilitating electrophilic attack on the naphthylamine amine. Yields for the classical procedure range from 30–80%, depending on acid concentration and reaction time, with higher values achieved using in . Purification is commonly accomplished by recrystallization from or on using dichloromethane/ eluents, ensuring removal of unreacted compounds. Modern variants have optimized the process for efficiency and scalability. Ultrasound-assisted synthesis, using acoustic in with , reduces reaction times to 10–30 minutes while improving yields to 70–90% for Nile blue and analogs, compared to conventional heating. Microwave-assisted approaches, explored since the for benzophenoxazinium chlorides, further shorten times to 5–20 minutes under controlled heating, minimizing solvent use and enhancing product purity through rapid energy delivery. Alternative precursors, such as substituted 2-nitrosophenols, allow synthesis of analogs with tuned substituents at the 9-position. Key challenges in Nile blue synthesis include side products from over-oxidation of the intermediate , which can lead to dimeric impurities, and difficulties in scaling beyond laboratory quantities due to exothermic cyclization. These issues are mitigated in modern methods by precise and inert atmospheres, though commercial production often relies on optimized classical routes for cost-effectiveness.

Applications in Staining and Imaging

Histological Staining Workflow and Results

Nile blue staining in histology typically begins with sample preparation, where tissues are fixed in 4% formaldehyde solution for 24 hours to preserve cellular structure prior to staining. The staining solution is prepared as a 0.1-1% aqueous or ethanolic solution of Nile blue sulfate, often acidified with 1% sulfuric acid for differential lipid staining, where neutral lipids stain pink to red and acidic lipids stain blue under brightfield; for example, a common formulation involves dissolving 0.05 g of Nile blue in 100 ml of 1% sulfuric acid, followed by filtration before use. For fixed tissues, the workflow involves deparaffinizing and rehydrating paraffin-embedded sections (3-5 μm thick) through conventional and alcohol series, or using cryosections directly. Sections are then immersed in the Nile blue solution for 20 minutes at to allow binding. Following , slides are rinsed in or acid alcohol for 10-20 minutes to remove excess , and mounted in glycerol-based media such as for long-term preservation. For rapid assessment, a quick variant immerses sections for 30 seconds before rinsing. In live cell applications, unfixed cells are incubated directly with a dilute (e.g., 5 μM) Nile blue solution at 37°C for 10-15 minutes, followed by washing in to minimize toxicity. Visualization of stained samples occurs primarily under , where Nile blue imparts a blue color to nuclei and acidic cellular components, while neutral such as triglycerides and esters appear pink to red. For enhanced contrast, microscopy exploits the dye's spectroscopic properties, with excitation at 546 nm yielding orange-red emission specifically from droplets, enabling clear differentiation of lipid-rich regions against a low-background blue from other structures. To ensure specificity and reproducibility, controls such as parallel with alone are employed to compare neutral detection, confirming that the red fluorescence arises from -bound rather than nonspecific binding. Optimal results require adjusting the solution to 7.4, particularly for live cell imaging, to balance and cellular uptake without altering polarity. Common troubleshooting issues include overstaining, which causes high background fluorescence obscuring specific signals; this can be addressed by extending rinse times or using fresh solutions. If excess dye persists, destaining with 1% acetic acid for 1-2 minutes followed by thorough washing effectively reduces nonspecific binding while preserving lipid-specific coloration.

Use in Lipid and Cellular Component Detection

Nile blue, a cationic phenoxazine , exhibits selectivity for through its positively charged structure, which electrostatically binds to negatively charged acidic phospholipids and free fatty acids, resulting in a coloration under . In non-polar environments such as neutral (e.g., triglycerides and esters), the partitions and undergoes solvatochromism, shifting to a or red hue due to altered electronic transitions in the hydrophobic milieu. This differential enables distinction between lipid types without extraction steps, leveraging the 's amphiphilic properties for integration. A prominent application involves the detection of poly-β-hydroxybutyrate (PHB) granules, intracellular storage in , where Nile blue A imparts a strong orange upon excitation at 490 nm, appearing as distinct orange spots in microscopy. This specificity surpasses alternatives like Sudan black B, allowing rapid identification of PHB-accumulating microbes in environmental samples and facilitating studies in microbial ecology on carbon storage dynamics. The emission correlates quantitatively with PHB content, enabling estimation of accumulation levels in bacterial populations via image analysis. In eukaryotic cells, Nile blue visualizes -rich structures such as droplets in lysosomes and membrane proliferations, particularly in pathological contexts like muscle biopsies from lipid storage disorders or mitochondrial myopathies, where lipid droplets fluoresce yellow-gold and highlight abnormal membrane networks. These pink or fluorescent droplets indicate accumulation in lysosomes, aiding diagnosis of metabolic disruptions. Validation often combines Nile blue with staining, which confirms neutral presence through complementary red absorption in fixed sections. The dye's fluorescence intensity provides a proxy for overall lipid content, scaling linearly with concentration in lipid-laden samples, though it requires calibration against standards for accuracy. Despite its utility, limitations include under prolonged excitation, reducing signal over time in live , and potential interference from high protein concentrations, which can cause non-specific binding and elevate background .

Applications in Molecular Biology and Medicine

Role in DNA Electrophoresis

Nile blue functions as a visible, non-fluorescent stain for DNA in agarose gel electrophoresis, providing an alternative to UV-dependent dyes by producing blue-colored DNA bands observable under ambient white light. It binds to DNA primarily through a combination of groove binding at lower concentrations and intercalation at higher concentrations, forming stable complexes that enhance visibility without requiring specialized illumination. This binding mechanism allows Nile blue to be incorporated either directly into the agarose gel prior to polymerization at concentrations of approximately 0.001% (equivalent to about 10 μg/mL) or applied as a post-run stain. Key advantages of Nile blue over traditional stains like ethidium bromide include the avoidance of UV light exposure, which minimizes DNA photodamage during visualization and subsequent extraction steps, thereby preserving sample integrity for sensitive applications. It is also less mutagenic overall, as the dye's cationic nature and visible detection reduce risks associated with intercalators under UV irradiation. Sensitivity reaches a detection limit of approximately 20 ng of DNA per band, making it suitable for routine analyses, though it is somewhat less sensitive than high-end fluorescent alternatives. Additionally, Nile blue is compatible with downstream molecular techniques such as PCR and sequencing, as the stain can be readily removed by washing without inhibiting enzymatic reactions. The standard protocol involves preparing the agarose gel by dissolving the dye in the molten agarose solution before casting, followed by loading DNA samples and running electrophoresis under conventional conditions (e.g., 100 V for 30-60 minutes in TAE or TBE buffer). Post-run, bands appear immediately as blue streaks; if background staining obscures details, brief destaining in distilled water enhances contrast. For enhanced sensitivity, Nile blue's fluorescent properties can be exploited with 633 nm excitation and 660 nm emission, allowing detection under red light sources without UV hazards. This method finds routine use in plasmid DNA sizing in molecular biology labs and in forensic DNA analysis, where UV avoidance is essential to prevent degradation of evidentiary samples.

Applications in Oncology and Photodynamic Therapy

Nile blue and its derivatives accumulate preferentially in tumor cells, particularly partitioning into lipid-rich membranes and lysosomes of malignant tissues. This selective uptake facilitates their role as photosensitizers in , where excitation by red light in the 630-660 nm range promotes the dye from its to a triplet , enabling energy transfer to molecular oxygen to generate cytotoxic species. The resulting induce oxidative damage to cellular components, leading to or primarily in cancer cells while sparing surrounding healthy tissue. In (PDT), derivatives such as ethylamino-benzophenothiazinium (EtNBS) have demonstrated efficacy in preclinical models of cancers including bladder carcinoma, , and sarcomas. Typical protocols involve concentrations of 1-10 μM, followed by at 635 nm delivering 5-10 J/cm², achieving significant tumor cell kill and without notable dark toxicity. For instance, in human (HL-60) cells, Nile blue-mediated PDT at 12.5 μM and appropriate light dosing reduced viability by inducing mitochondrial dysfunction and accumulation. Outcomes include selective with IC50 values around 5 μM under illumination, highlighting improved potency over non-illuminated conditions. Beyond therapy, Nile blue serves diagnostic purposes through fluorescent labeling of tumor margins, enabling intraoperative visualization in models of premalignant and malignant lesions. Its pH sensitivity further supports imaging of acidic tumor microenvironments, as nanosized Nile blue-based probes exhibit far-red/near-infrared emission shifts that report clinically relevant pH variations in hypoxic tumor regions. Investigational efforts since the 1990s have progressed to preclinical nanoparticle conjugates in the 2020s, enhancing targeted delivery and penetration in solid tumors for combined PDT and imaging applications. As of November 2025, applications of Nile blue in photodynamic therapy remain confined to preclinical studies, with no reported clinical trials.

Safety, Toxicity, and Derivatives

Toxicity Profile and Handling

Nile blue is generally considered nontoxic at the low concentrations typically used in applications, such as below 1 mM, where it poses minimal risk to biological systems during short-term exposure. It acts as a mild irritant to and eyes upon direct contact, potentially causing redness or discomfort, but does not induce severe corrosive effects. As of 2025, Nile blue is not classified as a by major regulatory bodies, with no evidence of oncogenic potential in available toxicological assessments. Some studies position Nile blue as a safer alternative to ethidium bromide for DNA visualization in gel electrophoresis due to potentially reduced mutagenic activity. However, like other intercalating dyes, it may pose genotoxicity risks, and further assessments are recommended. For safe handling, Nile blue should be used in a well-ventilated area or fume hood to minimize inhalation of dust, particularly when weighing powders. Personal protective equipment, including nitrile gloves and safety goggles, is recommended to prevent skin and eye contact. Ingestion and inhalation must be avoided, and contaminated surfaces should be cleaned promptly with water. The compound remains stable under normal laboratory conditions but is light-sensitive in solution and can exhibit photosensitizing effects leading to DNA damage under exposure to light, so storage in amber containers or dark conditions is advised to maintain efficacy. Environmentally, Nile blue is biodegradable under certain conditions, such as photocatalytic processes, but its cationic structure can lead to in aquatic sediments and organisms, posing risks to ecosystems if released untreated. Disposal must follow local waste regulations, avoiding direct release into drains or waterways to prevent contamination. It is considered low risk for applications based on established safety data, but it is not approved by the FDA for systemic human administration without chemical modification.

Structural Derivatives and Analogs

Nile Red serves as a prominent neutral analog of the cationic Nile blue, achieved by replacing the exocyclic amino group with an alkoxy substituent, which imparts lipid solubility and enables selective staining of neutral lipids and lysosomes in cellular imaging applications. Sulfonated Nile blue derivatives improve aqueous solubility by incorporating groups at the 2-hydroxy position; for instance, four such compounds (1a, 1b, 2a, 2b) were synthesized through acid-free condensation reactions in N,N-dimethylformamide at 90°C, yielding sharp emissions at 670–675 nm and quantum yields superior to prior water-soluble variants, with no aggregation below 1–4 µM in water. Alkylated variants like ethyl Nile blue A (EtNBA), featuring N-ethyl substitution on the amino group, enhance (PDT) by promoting tumor localization and fluorescence contrast between normal and premalignant tissues, as demonstrated in animal models with peak fluorescence 2–3 hours post-administration at doses of 0.5–2.5 mg/kg. Modifications to the synthesis of Nile blue derivatives often target the amino groups to fine-tune ; substitution with N-ethylamino groups at the 9-position, for example, results in red-shifted emission spectra while preserving the phenoxazine core. Cationic probes, such as those with a ring replacing the 5-amino group and a phenyl at C1, exhibit enhanced mitochondrial permeability at concentrations as low as 100 nM, enabling specific live-cell of fission and fusion dynamics without off-target staining of lysosomes or nuclei. These probes display pronounced solvatochromism, with an 8-fold increase in octanol relative to aqueous media and a of 40–50 nm in . Solvatochromic sensors based on , incorporated into pH-responsive diblock vesicles (e.g., PMPC-PDPA tagged with methacrylamide or carbamate-linked ), facilitate far-red and near-infrared live-cell mapping by shifting absorption/emission maxima (e.g., from 640 nm to 585 nm across 6.0–6.4), selectively highlighting acidic tumor regions and endolysosomal compartments. Such derivatives offer advantages including greater photostability, reduced oxidation susceptibility (e.g., resistance to ROS like HO• and HOCl), and improved selectivity over the parent . Recent advancements, including 2023 conjugates of -loaded poly(lactic-co-glycolic ) () nanocapsules with , enable targeted theranostic delivery to HER2-positive tumors via a two-step barnase/barstar pretargeting strategy, achieving 94.9% tumor growth inhibition and superior imaging compared to one-step methods. While retaining the fundamental phenoxazine scaffold, these structural alterations in charge, , and expand Nile blue's utility across diverse niches, from lipid-specific probes to organelle-targeted sensors.

References

  1. https://pubmed.ncbi.nlm.nih.gov/27406265/
  2. https://digitalcommons.ursinus.edu/cgi/viewcontent.cgi?article=1093&context=biology_hon
  3. https://pubmed.ncbi.nlm.nih.gov/3559182/
  4. https://doi.org/10.1002/chem.201601570
  5. https://pubchem.ncbi.nlm.nih.gov/compound/Nile-Blue-A
  6. https://doi.org/10.1021/acs.jpcb.3c05084
  7. https://pubs.acs.org/doi/10.1021/acscentsci.4c00073
  8. https://pubs.acs.org/doi/10.1021/acs.jpcb.3c05084
  9. https://pubchem.ncbi.nlm.nih.gov/compound/16938
  10. https://www.sigmaaldrich.com/US/en/product/sial/222550
  11. https://www.chemicalbook.com/ChemicalProductProperty_EN_CB2462239.htm
  12. https://www.chemicalbook.com/ProductChemicalPropertiesCB2462239_EN.htm
  13. https://www.neo-biotech.com/other-products-186/nile-blue-a-sulfate-3625-57-8-24601434.html
  14. https://www.echemi.com/products/pid_Seven15532-nilebluechloride.html
  15. https://pubs.aip.org/aip/jcp/article/145/10/104303/564617/Nile-blue-shows-its-true-colors-in-gas-phase
  16. https://pubs.acs.org/doi/10.1021/ja407380t
  17. https://www.sciencedirect.com/science/article/abs/pii/S0301010409000871
  18. https://chemistry-europe.onlinelibrary.wiley.com/doi/abs/10.1002/chem.201601570
  19. https://core.ac.uk/download/pdf/4271842.pdf
  20. https://www.researchgate.net/publication/305309724_Nile_Red_and_Nile_Blue_Applications_and_Syntheses_of_Structural_Analogues
  21. https://onlinelibrary.wiley.com/doi/abs/10.1002/path.1700150107
  22. https://journals.biologists.com/jcs/article/s3-88/3/383/63774/The-Use-of-Nile-Blue-in-the-Examination-of-Lipoids
  23. https://www.jstage.jst.go.jp/article/ahc1968/16/3/16_3_286/_pdf
  24. https://www.chem.tamu.edu/cfi/Publications/221.pdf
  25. https://www.rsc.org/suppdata/d5/cc/d5cc03927d/d5cc03927d1.pdf
  26. https://www.sciencedirect.com/science/article/pii/S1350417713001181
  27. https://www.researchgate.net/publication/23489686_Water-Soluble_Nile_Blue_Derivatives_Syntheses_and_Photophysical_Properties
  28. https://pmc.ncbi.nlm.nih.gov/articles/PMC11212141/
  29. https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/product/documents/226/846/115946-en.pdf
  30. https://www.stainsfile.com/dyes/nile-blue-a/
  31. https://focalplane.biologists.com/2021/09/14/using-nile-blue-and-nile-red-to-visualise-the-presence-of-lipids-in-cryosectioned-tissues/
  32. https://link.springer.com/article/10.1007/BF02428979
  33. https://www.sciencedirect.com/topics/chemistry/oil-red-o
  34. https://www.researchgate.net/figure/Dependence-of-Nile-blue-fluorescence-on-lipid-concentration-with-excitation-at-510-nm-and_fig1_9088650
  35. https://search.informit.org/doi/10.3316/INFORMIT.416838218643644
  36. https://doi.org/10.1006/abio.2000.4537
  37. https://www.ncbe.reading.ac.uk/electrophoresis-kits-and-related-items/
  38. https://www.aatbio.com/products/nile-blue-a-chloride
  39. https://pubmed.ncbi.nlm.nih.gov/2021950/
  40. https://aacrjournals.org/cancerres/article/51/4/1109/497497/Photosensitization-Uptake-and-Retention-of
  41. https://pmc.ncbi.nlm.nih.gov/articles/PMC3970436/
  42. https://papers.ssrn.com/sol3/papers.cfm?abstract_id=4097295
  43. https://pubmed.ncbi.nlm.nih.gov/11202363/
  44. https://www.spectrumchemical.com/media/sds/N0273.PDF
  45. https://www.carlroth.com/medias/SDB-7723-IE-EN.pdf
  46. https://pubmed.ncbi.nlm.nih.gov/37933673/
  47. https://www.fishersci.com/store/msds?partNumber=AC415690100&countryCode=US&language=en
  48. https://www.echemi.com/sds/nilebluechloride-pid_Seven15532.html
  49. https://pubmed.ncbi.nlm.nih.gov/24576317/
  50. https://pmc.ncbi.nlm.nih.gov/articles/PMC10935274/
  51. https://pubmed.ncbi.nlm.nih.gov/19025740/
  52. https://www.mdpi.com/1999-4923/15/3/833
Add your contribution
Related Hubs
User Avatar
No comments yet.