Community hub
Recent from talks
Contribute something
Nothing was collected or created yet.
Polyimine
View on WikipediaPolyimines are classified as polymer materials that contain imine groups, which are characterised by a double bond between a carbon and nitrogen atom.[1] The term polyimine can also be found occasionally in covalent organic frameworks (COFs). In (older) literature, polyimines are sometimes also referred to as poly(azomethine) or polyschiff.
Synthesis
[edit]Polyimines can be synthesised via a condensation reaction between aldehydes and (primary) amines.[2] During this reaction, water is also formed as byproduct. Often, the synthesis can be performed at room temperature, but to fully cure the materials and remove remaining water, they can be dried at slightly elevated temperatures and/or in vacuum.
Applications
[edit]One of the applications of polyimines is as in covalent adaptable networks (CANs). These are polymer materials that are crosslinked via dynamic covalent bonds. Besides polyimines, other types of dynamic covalent chemistry can also be used.[3] Polyimine CANs are largely investigated to create recyclable and self-healing thermoset materials,[4] but they can also find use in composite materials with higher performance.[5]
Flame retardants
Because of the free radical scavenging properties of imines,[6] they are well fit to be used in flame retardant materials. In addition, different polyimine materials have also been investigated for which phosporous species have been incorporated. These materials represent more sustainable and less harmful alternatives to previously used halogenated polymers.
Sensory devices
The dynamic characteristics of polyimines enables them to be used as sensory devices. An example of this is the sensing of amine compounds. Polyimine materials have been constructed that enable penetration of (small) monoamine molecules.[7] These amines can perform bond exchange reactions with the polyimine network, and as a result reduce the crosslinking density. As a result, the materials soften or even liquify. The change in material properties provides a "read-out" of the presence of amines.
Electronic skin
Polyimines have been investigated for their use in the production of electronic skins (e-skin).[8] For this, Polyimine networks were doped with conductive silver nanoparticles. The malleability of the polyimine network enables the e-skin to conform to complex or uneven surfaces without introducing excessive interfacial stresses.
Bio-based polyimines
[edit]Various studies have been conducted to synthesise bio-based polyimines due the great natural abundance of aldehydes and amines.[9] Popular sources for aldehydes include vanilin, which can be obtained from lignin, or 2,5-furandicarboxaldehyde (FDC), which can be derived from fructose.[10]
Imines in other polymers
[edit]Apart from polyimine polymers that are formed directly via the condensation reaction from aldehydes and amines, it is also possible to incorporate imines in other existing polymer materials. Imines have, for example, been incorporated into recyclable epoxy-based thermosets[11] and polyesters.[12]
Confusion in nomenclature
[edit]Polyimines are commonly abbreviated as PI. However, the same abbreviation is typically used for polyimide. Which has almost the same name, but is a significantly different type of polymer material.
Sometimes the term polyimine is used to describe a material called polyethyleneimine. This material exists in different forms (i.e., linear or branched), but does in fact not contain actual imine (C=N) bonds.
See also
[edit]References
[edit]- ^ Suematsu, K.; Nakamura, K.; Takeda, J. (1983). "Polyimine, a C=N Double Bond Containing Polymers: Synthesis and Properties". Polymer Journal. 15: 71–79. doi:10.1295/polymj.15.71.
- ^ Belowich, M. E.; Stoddart, J. F. (2012). "Dynamic imine chemistry". Chemical Society Reviews. 41 (6): 2003–2024. doi:10.1039/C2CS15305J. PMID 22310886.
- ^ García, F.; Smulders, M. M. J. (2016). "Dynamic Covalent Polymers". Journal of Polymer Science Part A: Polymer Chemistry. 54 (22): 3551–3577. Bibcode:2016JPoSA..54.3551G. doi:10.1002/pola.28260. PMC 5129565. PMID 27917019.
- ^ Schoustra, S. K.; Dijksman, J. A.; Zuilhof, H.; Smulders, M. M. J. (2021). "Molecular control over vitrimer-like mechanics – tuneable dynamic motifs based on the Hammett equation in polyimine materials". Chemical Science. 12 (1): 293–302. doi:10.1039/d0sc05458e. ISSN 2041-6520. PMC 8178953. PMID 34163597.
- ^ Taynton, Philip; Ni, Huangang; Zhu, Chengpu; Yu, Kai; Loob, Samuel; Jin, Yinghua; Qi, H. Jerry; Zhang, Wei (2016). "Repairable Woven Carbon Fiber Composites with Full Recyclability Enabled by Malleable Polyimine Networks". Advanced Materials. 28 (15): 2904–2909. Bibcode:2016AdM....28.2904T. doi:10.1002/adma.201505245. PMID 26875745. S2CID 205266065.
- ^ Lei, Zhou Qiao; Xie, Pu; Rong, Min Zhi; Zhang, Ming Qiu (2015). "Catalyst-free dynamic exchange of aromatic Schiff base bonds and its application to self-healing and remolding of crosslinked polymers". Journal of Materials Chemistry A. 3 (39): 19662–19668. doi:10.1039/C5TA05788D.
- ^ Kathan, M.; Jurissek, C.; Kovaříček, P.; Hecht, S. (2019). "Imine-based dynamic polymer networks as photoprogrammable amine sensing devices". Journal of Polymer Science Part A: Polymer Chemistry. 57 (24): 2378–2382. Bibcode:2019JPoSA..57.2378K. doi:10.1002/pola.29518.
- ^ Zou, Z.; Zhu, C.; Li, Y.; Lei, X.; Zhang, W.; Xiao, J. (2018). "Rehealable, fully recyclable, and malleable electronic skin enabled by dynamic covalent thermoset nanocomposite". Science Advances. 4 (2) eaaq0508. Bibcode:2018SciA....4..508Z. doi:10.1126/sciadv.aaq0508. PMC 5817920. PMID 29487912.
- ^ Liguori, A.; Hakkarainen, M. (2022). "Designed from Biobased Materials for Recycling: Imine-Based Covalent Adaptable Networks". Macromolecular Rapid Communications. 43 (13) 2100816. doi:10.1002/marc.202100816. PMID 35080074. S2CID 246286003.
- ^ Dhers, S.; Vantomme, G.; Avérous, L. (2019). "A fully bio-based polyimine vitrimer derived from fructose" (PDF). Green Chemistry. 21 (7): 1596–1601. doi:10.1039/C9GC00540D. S2CID 104336119.
- ^ Zhao, S.; Abu-Omar, M. M. (2018). "Recyclable and Malleable Epoxy Thermoset Bearing Aromatic Imine Bonds". Macromolecules. 51 (23): 9816–9824. Bibcode:2018MaMol..51.9816Z. doi:10.1021/acs.macromol.8b01976. S2CID 104433836.
- ^ Snyder, R. L.; Lidston, C. A. L.; De Hoe, G. X.; Parvulescu, M. J. S.; Hillmyer, M. A.; Coates, G. W. (2020). "Mechanically robust and reprocessable imine exchange networks from modular polyester pre-polymers". Polymer Chemistry. 11 (33): 5346–5355. doi:10.1039/C9PY01957J. OSTI 1770322. S2CID 214152050.