Community hub
Recent from talks
Knowledge base stats:
Talk channels stats:
Members stats:
Renault R35
The Renault R35, an abbreviation of Char léger Modèle 1935 R or R 35, was a French light infantry tank of the Second World War.
Designed from 1933 onwards and produced from 1936, the type was intended as an infantry support light tank, equipping autonomous tank battalions, that would be allocated to individual infantry divisions to assist them in executing offensive operations. To this end it was relatively well-armoured but slow and lacking a good antitank capacity, fitted with a short 37 mm gun. At the outbreak of the war, the antitank role was more emphasized leading to the development and eventual production from April 1940 of a subtype with a more powerful longer gun, the Renault R40. It was planned to shift new production capacity to the manufacture of other, faster, types, but due to the defeat of France, the R35/40 remained the most numerous French tank of the war, with about 1685 vehicles having been produced by June 1940. At that moment it had also been exported to Poland, Romania, Turkey and Yugoslavia. For the remainder of the war, Germany and its allies would use captured vehicles, some of them rebuilt into tank destroyers.
The development plan of 1926 foresaw the introduction of a char d'accompagnement, a cheap mass-produced light tank to replace the Renault FT of World War I vintage, to make it possible for the standard infantry divisions to execute combined arms infiltration tactics, seen as the only viable method of modern offensive warfare left for non-motorised units. The French army did not have the means to motorise more than a few select divisions. In 1930 this plan was replaced by a new one, giving more precise specifications. The first tank to be developed to fulfil its requirements, the Char D1, proved to be neither cheap nor particularly light. In 1933, Hotchkiss offered an alternative solution, the later Hotchkiss H35. For political reasons this proposal was turned into the Plan 1933 and the whole of French industry was in August 1933 invited to propose possible designs. Fourteen companies responded (among which Delaunay-Belleville) and five submitted a prototype: Hotchkiss itself, the Compagnie Général de Construction des Locomotives, APX, FCM and of course France's prime tank producer: Renault. Fearing that his rival Hotchkiss might well replace him as such, Louis Renault hurried to finish a vehicle; construction was soon in such an advanced stage that the changes in specification issued on 21 June 1934, to increase armour thickness from 30 to 40 mm, could not be implemented. On 20 December 1934, Renault was the first to deliver a prototype, with the project name Renault ZM, to the Commission de Vincennes.
In the spring of 1935 this vehicle was refitted with heavier armour and a standard APX turret, attached by the Atelier de Rueil between 18 and 25 April. The prototype was still being tested when international tensions increased due to German re-armament. This prompted an urgent demand for swifter modernisation of the French tank fleet. The ZM was to be put into production immediately. On 29 April 1935 an order of 300 was made, even before the final model could be finished, at a price of 190,000 French franc per hull (unarmed, without the engine and turret, the overall export price was ca. 1,400,000 francs in 1939, that is ca. 32,000 dollars by 1939 standards). The first series production vehicle was delivered on 4 June 1936 and had to be extensively tested again as it was different from the prototype.
To save time, Renault based the suspension and running gear on that of the AMR 35 that was designed for the cavalry. It had five wheels at each side, fitted with horizontal rubber-cylinder springs, like the AMC 35.
The hull, with a length of 4.02 m, consisted of three cast modules, with a maximum armour thickness of 43 millimetres, that were bolted together. Total weight was 10.6 metric tonnes (9.8 tonnes without fuel and ammunition). The bottom module carried on each side an independently sprung front wheel, two bogies and the driving sprocket at the extreme front. The final drive and differentials were housed at the right in the nose module. It was steered through a Cletrac differential with five gears and by engaging the brakes. The driver was seated somewhat to the left and had two hatches. The Renault V-4 85 hp engine was to the right in the short rear with the self sealing 166 litre fuel tank at its left. It rendered a road speed of 20 km/h and a range of 130 km. Cross-country speed did not exceed 14 km/h and the fuel consumption totaled 212 litre/100 km. From 1940 onward they were fitted with AMX tails to help in trench crossing.
The cast APX hexagonal turret had a 30 mm thick domed rotatable cupola with vertical vision slits (the highest point of 2.13 m) and had to be either hand cranked or moved about by the weight of the commander, the only other crew member. There was sometimes unofficially a seat installed for him but he most often stood. The rear of the turret had a hatch that hinged down that could be used as a seat to improve observation. The earliest vehicles were fitted with the APX-R turret (with the L713 sight) mounting the short Puteaux 37 mm L/21 SA18 gun (the first batches were removed from Renault FT tanks which were then rebuilt as utility vehicles) and the 7.5 mm Châtellerault fortress machine gun. The cannon had a very poor armour penetration: only 12 mm at 500 metres. Afterwards the APX turret with the same cannon but the improved L739 sight and the standard Châtellerault 7.5 mm MAC31 Reibel machine gun was used because of delivery delays of the original weapon. There were also so many delays in the production of the turrets that after the first 380 hulls had been produced in 1936 and only 37 could be fitted with a turret, production was slowed down to 200 annually. The 7.5 mm machine gun's spent cartridges (from a total of 2,400) went down a chute through a hole in the floor. The tank carried 42 armour piercing and 58 high explosive rounds.
The R 35 at first had no radio, except for the second battalion of the 507e Régiment de Chars de Combat (of Charles de Gaulle), but the R 40 had the ER 54 installed. However, this added to the already heavy task load of the commander, who also acted as gunner and loader.
Hub AI
Renault R35 AI simulator
(@Renault R35_simulator)
Renault R35
The Renault R35, an abbreviation of Char léger Modèle 1935 R or R 35, was a French light infantry tank of the Second World War.
Designed from 1933 onwards and produced from 1936, the type was intended as an infantry support light tank, equipping autonomous tank battalions, that would be allocated to individual infantry divisions to assist them in executing offensive operations. To this end it was relatively well-armoured but slow and lacking a good antitank capacity, fitted with a short 37 mm gun. At the outbreak of the war, the antitank role was more emphasized leading to the development and eventual production from April 1940 of a subtype with a more powerful longer gun, the Renault R40. It was planned to shift new production capacity to the manufacture of other, faster, types, but due to the defeat of France, the R35/40 remained the most numerous French tank of the war, with about 1685 vehicles having been produced by June 1940. At that moment it had also been exported to Poland, Romania, Turkey and Yugoslavia. For the remainder of the war, Germany and its allies would use captured vehicles, some of them rebuilt into tank destroyers.
The development plan of 1926 foresaw the introduction of a char d'accompagnement, a cheap mass-produced light tank to replace the Renault FT of World War I vintage, to make it possible for the standard infantry divisions to execute combined arms infiltration tactics, seen as the only viable method of modern offensive warfare left for non-motorised units. The French army did not have the means to motorise more than a few select divisions. In 1930 this plan was replaced by a new one, giving more precise specifications. The first tank to be developed to fulfil its requirements, the Char D1, proved to be neither cheap nor particularly light. In 1933, Hotchkiss offered an alternative solution, the later Hotchkiss H35. For political reasons this proposal was turned into the Plan 1933 and the whole of French industry was in August 1933 invited to propose possible designs. Fourteen companies responded (among which Delaunay-Belleville) and five submitted a prototype: Hotchkiss itself, the Compagnie Général de Construction des Locomotives, APX, FCM and of course France's prime tank producer: Renault. Fearing that his rival Hotchkiss might well replace him as such, Louis Renault hurried to finish a vehicle; construction was soon in such an advanced stage that the changes in specification issued on 21 June 1934, to increase armour thickness from 30 to 40 mm, could not be implemented. On 20 December 1934, Renault was the first to deliver a prototype, with the project name Renault ZM, to the Commission de Vincennes.
In the spring of 1935 this vehicle was refitted with heavier armour and a standard APX turret, attached by the Atelier de Rueil between 18 and 25 April. The prototype was still being tested when international tensions increased due to German re-armament. This prompted an urgent demand for swifter modernisation of the French tank fleet. The ZM was to be put into production immediately. On 29 April 1935 an order of 300 was made, even before the final model could be finished, at a price of 190,000 French franc per hull (unarmed, without the engine and turret, the overall export price was ca. 1,400,000 francs in 1939, that is ca. 32,000 dollars by 1939 standards). The first series production vehicle was delivered on 4 June 1936 and had to be extensively tested again as it was different from the prototype.
To save time, Renault based the suspension and running gear on that of the AMR 35 that was designed for the cavalry. It had five wheels at each side, fitted with horizontal rubber-cylinder springs, like the AMC 35.
The hull, with a length of 4.02 m, consisted of three cast modules, with a maximum armour thickness of 43 millimetres, that were bolted together. Total weight was 10.6 metric tonnes (9.8 tonnes without fuel and ammunition). The bottom module carried on each side an independently sprung front wheel, two bogies and the driving sprocket at the extreme front. The final drive and differentials were housed at the right in the nose module. It was steered through a Cletrac differential with five gears and by engaging the brakes. The driver was seated somewhat to the left and had two hatches. The Renault V-4 85 hp engine was to the right in the short rear with the self sealing 166 litre fuel tank at its left. It rendered a road speed of 20 km/h and a range of 130 km. Cross-country speed did not exceed 14 km/h and the fuel consumption totaled 212 litre/100 km. From 1940 onward they were fitted with AMX tails to help in trench crossing.
The cast APX hexagonal turret had a 30 mm thick domed rotatable cupola with vertical vision slits (the highest point of 2.13 m) and had to be either hand cranked or moved about by the weight of the commander, the only other crew member. There was sometimes unofficially a seat installed for him but he most often stood. The rear of the turret had a hatch that hinged down that could be used as a seat to improve observation. The earliest vehicles were fitted with the APX-R turret (with the L713 sight) mounting the short Puteaux 37 mm L/21 SA18 gun (the first batches were removed from Renault FT tanks which were then rebuilt as utility vehicles) and the 7.5 mm Châtellerault fortress machine gun. The cannon had a very poor armour penetration: only 12 mm at 500 metres. Afterwards the APX turret with the same cannon but the improved L739 sight and the standard Châtellerault 7.5 mm MAC31 Reibel machine gun was used because of delivery delays of the original weapon. There were also so many delays in the production of the turrets that after the first 380 hulls had been produced in 1936 and only 37 could be fitted with a turret, production was slowed down to 200 annually. The 7.5 mm machine gun's spent cartridges (from a total of 2,400) went down a chute through a hole in the floor. The tank carried 42 armour piercing and 58 high explosive rounds.
The R 35 at first had no radio, except for the second battalion of the 507e Régiment de Chars de Combat (of Charles de Gaulle), but the R 40 had the ER 54 installed. However, this added to the already heavy task load of the commander, who also acted as gunner and loader.