Hubbry Logo
RototomRototomMain
Open search
Rototom
Community hub
Rototom
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Contribute something
Rototom
Rototom
Rototom
View on Wikipedia
from Wikipedia
Rototom on a standard mounting bar

The rototom is a shell-less drum developed by Al Payson and Michael Colgrass that is able to change pitch by rotating its drumhead around a threaded metal ring.[1] Unlike many types of drums, rototoms are designed to have a variable definite pitch leading composers to write specific notes for them as pitched percussion instruments. They are also often used to extend the tom range of a standard drum kit.

Description

[edit]

Tuning

[edit]

Rototoms can be tuned quickly by rotating the drumhead, which sits in a threaded metal ring. Rotation raises or lowers the tension hoop relative to the rim, which increases or decreases the pitch of the drum by increasing or decreasing the tension of the drumhead.

Sizes

[edit]
Three small rototoms on a mounting bar

Drum company Remo has historically offered rototoms in seven diameters: 6 inches (15 cm), 8 inches (20 cm), 10 inches (25 cm), 12 inches (30 cm), 14 inches (36 cm), 16 inches (41 cm), and 18 inches (46 cm). However, as of 2023, Remo only offers rototoms ranging from a 6 to 10 inch diameter as part of a set that includes a mounting rail and stand. All other sizes have been discontinued. Each one is tunable over an octave's range or more, although the company notes that the practical range is approximately a sixth.[2]

Applications

[edit]
The drum kit
Drum KitBass drumChina cymbalSnare drumSnare drumFloor tomFloor tomSplash cymbalRide cymbalTomsHi-hatCrash cymbalDrum hardwareDrum hardwareBongo
Not shown
See also

Rototoms can replace more specialized drums such as tenor timpani owing to their clear, pitched nature.[3] Jazz, rock and studio performers use rototoms both as a solo voice and as conventional tom-toms; they can be rapidly tuned to produce glissando effects and can be arrayed for a virtual percussion keyboard. For concert and marching band programs, rototoms combine rapid tuning with portability and sound quality, working both as concert tom-toms and as practice timpani. For stage bands and jazz ensembles, drum kits are fitted out with batter heads. When tuned to the mid-range, they have an indefinite pitch with fewer harmonic overtones than conventional tom-toms; tuned to the high range, they produce a sound not unlike timbales.

Rototoms can assist students in ear training and in developing their timpani techniques and— because of their portability, storability and relatively low cost— are often used by professional performers as practice instruments. They are also used as definite-pitched instruments in elementary music programs, such as Orff Schulwerk, where their sound quality, pitch stability and rapid tuning are assets.[4]

Repertoire

[edit]

English composer Michael Tippett used a total of 38 rototoms— tuned chromatically, spanning across three octaves— in his last large-scale orchestral work, The Rose Lake (1993), based on a lake he spotted suddenly transforming from light green to translucent pink while on holiday in Senegal.[5] In 1979, percussionist William Kraft published Encounters VI, a concertino for rototoms and percussion quartet.[6]

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Rototom

View on Grokipedia
from Grokipedia
The rototom is a shell-less percussion instrument consisting of a single drumhead mounted in a die-cast zinc or aluminum frame, designed to produce a variable definite pitch through a rapid-tuning mechanism. Unlike traditional drums with fixed shells, it achieves tuning by rotating the drumhead and counterhoop around a threaded center bolt, allowing for instant adjustments spanning more than one octave. Developed in the 1960s through collaboration between percussionist Al Payson and composer Michael Colgrass, the rototom originated from Payson's prototypes inspired by tunable toy drums and Ludwig bongos, initially named "Timp-Toms" for their timpanic qualities. Payson created early versions using Remo practice pads, producing about 15 units in 1965 for Colgrass's orchestral work Rhapsodic Fantasy, which helped introduce melodic percussion to symphonic music. later refined and commercialized the design in 1968, launching the modern rototom as a versatile tool for musicians. Key features of the rototom include its lightweight aluminum frame with tension rods attached to a bottom support, enabling seamless integration into or standalone setups, and availability in various diameters such as 6, 8, and 10 inches for sets. This construction facilitates a distinctive, resonant tone that can replicate elements of or other tuned percussion while offering greater portability and responsiveness. Commonly employed in rock, , and progressive music ensembles—as well as recording studios and symphonic performances—the rototom has been notably used by artists like in the 1970s for its dynamic pitch-shifting effects during live sets.

Overview

Definition and Characteristics

The rototom is a shell-less, tunable classified under the Hornbostel-Sachs system as a struck membranophone with a single skin and frame. It features a stretched over a circular frame, which is mounted on a central threaded bolt allowing the entire frame to rotate and adjust the head's tension for precise pitch control. This design enables the instrument to produce variable pitches through mechanical tensioning rather than relying on a fixed shell or multiple lug adjustments. Sound production occurs when the is struck, generating tom-like tones that range from indefinite pitch in looser tunings to semi-definite or definite pitches when tensioned appropriately, often notated as specific notes in musical scores. The resulting sound profile is characterized by bright, resonant qualities with a focused attack, though the lack of a resonant shell results in lower overall volume and shorter sustain compared to conventional tom-toms. Depending on the tuning, the instrument can achieve a tonal span from low bass registers to higher ranges, providing melodic flexibility in percussion ensembles. In comparison to traditional tom-toms, which incorporate a cylindrical shell to enhance and projection, the rototom's frameless construction yields a lighter weight and facilitates rapid, on-the-fly tuning via simple , making it ideal for dynamic performance settings where pitch variation is essential. This absence of a shell also contributes to a more direct, less reverberant tone, emphasizing clarity over depth.

Historical Development

The rototom was invented in the early 1960s by composer Michael Colgrass and percussionist Al Payson as a solution for creating pitch-variable percussion instruments in , allowing performers to produce melodic lines on drums without relying on multiple fixed-pitch instruments. Colgrass, seeking to expand the expressive possibilities of tunable drums in orchestral and experimental compositions, collaborated with Payson, a percussionist with the , to develop a rotating mechanism that adjusted drumhead tension for rapid pitch glissandos and precise intonation. This innovation addressed the limitations of traditional percussion, where quick changes in pitch were cumbersome, particularly in works influenced by and traditions. Prototypes emerged in the early , with the first notable use occurring in Colgrass's composition Rhapsodic Fantasy for and Percussion, where the instrument enabled seamless pitch variations for dramatic effect in orchestral settings. Although no formal patent was filed, the design drew from earlier concepts like rotating kettle drums and tunable , refining them into a shell-less with a threaded ring for tension control, specifically targeted at professional percussionists needing versatility without multiple drums. Initially dubbed the "Colgrass Drum" or "Timp-Toms," these early versions featured simple frames, often made from readily available materials, and were hand-built by Payson to meet the demands of contemporary scores requiring agile tuning. The rototom gained early traction in drum kits during the through rock and genres, where its unique tonal range and visual appeal complemented the experimental drumming styles emerging in and . Drummer , of and later solo projects, popularized its integration into rock setups starting around 1977, using multiple rototoms to extend the kit's pitch spectrum and create sweeping fills that influenced and experimental composers. This adoption was bolstered by endorsements from jazz educators like Paul Price, who received early prototypes and incorporated them into percussion pedagogy, bridging orchestral origins with popular music applications. Remo Inc. commercialized the design starting in 1968, and by the 1980s had refined it for enhanced durability through stronger die-cast frames and improved mounting systems that allowed stable integration into larger kits. These updates addressed initial fragility issues in prototypes, making the instrument more reliable for touring and recording, while its quick-tuning feature—allowing pitch adjustments by rotation—became a hallmark for live performances in diverse genres. Al Payson died on June 23, 2024.

Design and Construction

Components and Materials

The rototom consists of several key physical components that enable its shell-less design and tunable functionality. The primary element is the drumhead, typically a single-ply synthetic material such as Mylar polyester film, which provides a taut, resonant surface without the need for a traditional drum shell. This synthetic head is stretched over the frame and secured by a counterhoop, often a super-heavy chrome-plated metal ring that distributes tension evenly across the head's edge. The frame itself is constructed from lightweight aluminum spokes, forming a spoke-like structure that supports the head and counterhoop while allowing for rotational adjustment. Mounting hardware includes threaded tension rods that pass through the aluminum spokes and connect to a bottom frame affixed to a central threaded bolt, facilitating secure attachment to stands or clamps via rim mounts or brackets. Material choices emphasize portability, acoustic projection, and resistance to environmental factors. Synthetic drumheads like those made from Mylar offer superior weather resistance compared to natural skins, maintaining integrity in varying humidity and temperature conditions during live performances. The aluminum frame, often weighing less than 5 pounds per unit when fully assembled, provides corrosion resistance and without adding unnecessary bulk, contributing to the instrument's overall openness for clear tone projection. Chrome-plated components, including the tension rods and counterhoop, enhance durability against wear from frequent tuning adjustments and stage handling. In assembly, the drumhead is placed over the upper aluminum frame, followed by the counterhoop, which is held in place by the tension rods threaded through the spokes to the lower frame and central bolt. This configuration allows the entire upper assembly to rotate freely around the bolt, enabling tool-free pitch changes by adjusting head tension. Modern rototoms feature reinforced aluminum spokes and high-tension-rated synthetic heads to withstand rigorous use in professional settings, evolving from earlier prototypes that were more prone to deformation under stress. The absence of a resonant shell further promotes an open, unamplified acoustic profile, with materials selected to minimize weight while maximizing responsiveness.

Tuning Mechanism and Sizes

The rototom features a unique rapid-tuning mechanism that eliminates the need for traditional lugs or tension rods, allowing performers to adjust pitch continuously by rotating the drum's aluminum frame clockwise to increase tension or counterclockwise to decrease it. This raises or lowers the tension hoop relative to the frame via a threaded center bolt and connected tension rods, which directly tightens or loosens , producing a definite pitch similar to a . The system enables instant tuning without additional tools, making it highly versatile for live adjustments. Each rototom offers a pitch range spanning more than one , with smaller diameters producing higher fundamental frequencies and larger ones yielding lower tones suitable for melodic or bass lines. For instance, a 6-inch rototom typically ranges from C4 (262 Hz) to G5 (784 Hz), providing soprano-like tones; an 8-inch model spans G3 (196 Hz) to E5 (659 Hz) for applications; and a 10-inch version covers C3 (131 Hz) to A4 (440 Hz), approaching bass registers. These semi-definite pitches allow for chromatic playing when multiple rototoms are used together, though the exact range can vary slightly based on head type and environmental conditions. Standard rototom diameters range from 6 to 18 inches, with the most common sizes being 6, 8, and 10 inches for individual units or sets that facilitate mid-to-high pitch clusters. Larger sizes like 12 or 14 inches are often employed for deeper tones, while full sets of two to four rototoms—mounted on a shared stand—enable performers to cover a practical three-octave span for sequences. Manufacturers like Remo prioritize these configurations for their balance of portability and tonal variety. Maintenance of the rototom involves periodic head replacement to preserve tonal clarity and prevent structural issues, with Remo recommending changes every six months for recreational use or more frequently (every 3-6 months) for heavy performance to avoid dents, , or uneven response. To maintain optimal tension calibration, users should rotate the frame evenly during adjustments and periodically clean the threaded bolt to prevent binding, which could lead to head warping or inconsistent pitch; replacement heads and parts are readily available through authorized retailers.

Musical Applications

In drum kits, rototoms are typically integrated using rim clamps or adapters attached to hi-hat stands, cymbal stands, or percussion racks, allowing seamless addition to standard setups without requiring a full drum shell. This mounting enables easy access for drummers, often positioning two or three rototoms in a row for quick transitions during performance. Sets from the and frequently featured pairs or arrays of 6-inch to 10-inch models tuned to complement the kit's toms, providing versatile accents and fills in rock and fusion styles. Playing techniques emphasize the rototom's unique tuning mechanism, where rapid rotation of the frame produces pitch sweeps, creating dramatic effects like dives or glissandi that enhance dynamic fills. Drummers employ sticks for precise rhythmic patterns or hands for softer, more nuanced textures, leveraging the drums' clear, overtone-free tone to build tension in grooves. In , rototoms add textural layers through melodic sequences, while fusion drummers incorporate them into improvised solos for their responsive pitch range and portable design. Smaller sizes yield higher pitches, allowing selection based on desired tonal fit within the kit. Setup variations range from single rototoms mounted for occasional use in compact rock kits to multi-rototom arrays on dedicated stands for expansive fusion rigs, facilitating live experimentation with tuning during sets. These configurations gained prominence in the late and early , when rototoms served as pitched alternatives to traditional , enhancing the era's evolving sounds in . Rototoms can also be fitted with acoustic triggers to activate synthesized sounds, blending organic and electronic elements in modern hybrid kits.

In Orchestral and Other Genres

In orchestral percussion sections, the rototom serves as a pitched instrument for specific melodic and textural effects in contemporary compositions. Composers specify rototoms in scores to achieve precise pitches, often tuning them to align with the ensemble's key for cohesion; for instance, in Michael Colgrass's Variations for Four Drums and Viola (1957), tunable tom-toms—realized on rototoms in performances—provide melodic to the viola, demonstrating their role in structured, notated passages. Similarly, employed rototoms with soft mallets in The Rose Lake (1993) to evoke an atmospheric, Arabic-inspired melody doubled by , highlighting their capacity for subtle, exotic timbres in symphonic works. In jazz ensembles, rototoms enable melodic solos and dynamic fills, with extended techniques such as sustained rolls enhancing improvisational expressiveness. Pioneering jazz drummer integrated rototoms into his kit during the early 1980s, using them for rapid tuning shifts and soloistic lines in performances like his 1980 collaboration with , where they added a distinctive, tunable voice to and small group settings. In experimental and avant-garde contexts, rototoms facilitate microtonal exploration through their continuous tuning mechanism, allowing composers to notate glissandi and non-tempered intervals for innovative timbral effects in chamber or ensemble pieces. Adaptations in fusion occasionally pair rototoms with ethnic percussion for hybrid tunings, blending their Western melodic clarity with traditional rhythms. Their use remains limited but is expanding in film scores, where rototoms contribute atmospheric tones to underscore tension and orchestral layers in dramatic sequences. Standard notation for rototoms in these genres employs a single-line or multi-line staff, with standard note heads positioned to indicate relative or absolute pitches to guide performers in real-time modifications.

Notable Uses and Manufacturers

Prominent Manufacturers

has been the primary manufacturer of rototoms since introducing commercial models in 1968, building on prototypes developed by percussionist Al Payson and composer Michael Colgrass for Colgrass's Rhapsodic Fantasy in 1965. The company refined the original Timp-Tom design into the modern rototom, featuring a shell-less construction with a rapid-tuning system that allows pitch adjustment over more than one by rotating the drumhead around a threaded ring. 's innovations include durable aluminum frames for structural integrity and synthetic heads, such as clear or coated Mylar variants, which provide longevity and consistent tone without the need for traditional shells. Other producers have contributed to the rototom market, including Weiss Music, which offers sets with internal precision-tuning mechanisms for enhanced projection and value in educational and settings. Gammon Percussion provides affordable entry-level models, often in 6-inch, 8-inch, and 10-inch configurations with double-braced stands for stability. Latin Percussion offered rototom sets in the 1980s for Latin and rock applications. Drumhead manufacturers like Evans offer compatible two-ply options, such as or Hydraulic heads, which fit rototoms for customized sustain and attack. Pearl Drums produces Rocket Toms, which are distinct 6-inch diameter pitched toms with aluminum or acrylic shells of varying depths (e.g., 12 to 18 inches) for melodic accents in rock and fusion, using standard tension-rod tuning rather than a shell-less rotating mechanism. Standard production lines from Remo include popular sizes like the 8-inch model, typically sold in sets of 6-inch, 8-inch, and 10-inch drums mounted on a shared rail or stand. As of 2025, individual units are available for $50 to $150, while basic 3-piece sets retail for approximately $350 to $450, depending on size and configuration, through major retailers. Quality evolutions in rototoms have emphasized modular mounting systems, such as Remo's RotoTrac, which allows customizable setups with stands or harnesses for versatile percussion configurations. Recent advancements incorporate synthetic materials for weather resistance and reduced maintenance, aligning with broader industry shifts toward durable, low-impact production.

Famous Performers and Recordings

One of the most prominent users of the rototom in was drummer of , who incorporated an 8-inch Remo rototom into his setup during live performances from 1979 to 1981. He frequently triggered the Tama DS-200 drum synthesizer with it to create electronic effects, enhancing the band's reggae-infused during 1980s tours. This innovative application highlighted the rototom's versatility in blending acoustic and electronic percussion in high-energy live settings. In orchestral and , composer Michael Colgrass played a pivotal role in popularizing the rototom through his Pulitzer Prize-winning work for percussion quartet and orchestra, premiered by the in 1977. Colgrass, who collaborated on the instrument's early development as a tunable melodic , featured rototoms prominently in the piece to explore shifting percussion colors and independent solos among the four players. The composition's success helped establish the rototom as a serious tool for melodic expression in ensemble works. Jazz fusion drummer Billy Cobham also embraced rototoms as specialized percussion during the 1970s and 1980s, integrating them into his expansive kits for varied timbral combinations in recordings and performances. His use contributed to the instrument's adoption in fusion genres, where its quick pitch adjustments allowed for dynamic, layered grooves, as seen in his innovative approach to drum orchestration. Key recordings further illustrate the rototom's influence, such as Colgrass's , which demonstrated its orchestral potential through intricate percussion dialogues. In rock contexts, adaptations of Edgard Varèse's Ionisation in modern percussion ensembles have incorporated rototoms to approximate the original's demanding timbral effects with greater tuning flexibility. Fusion examples include Cobham's work on albums like (1973), where rototoms added melodic depth to complex rhythms, though specific tracks emphasize their role in broader percussive innovation rather than isolated accents. The rototom's cultural impact peaked in the 1970s and 1980s rock scenes, appearing in live shows and music videos for its sharp attack and visual appeal during pitch manipulations, as exemplified by drummers like and in contexts. This era saw it become a staple for triggered effects and melodic fills in , influencing bands from to Missing Persons. By the 1990s, its prominence waned with advancements, but modern revivals blend rototoms with electronic hybrids in genres like , as in Tool's intricate percussion arrangements. Vintage rototoms from the Copeland era, particularly 1970s-1980s models, hold collectible value due to their association with iconic kits and scarcity of complete sets, with rare examples fetching up to $1,500 including stands and cases. These instruments' historical ties to pioneering performers drive demand among collectors seeking authentic 1980s rock gear.

References

  1. https://www.definitions.net/definition/rototom
  2. https://remo.com/product/rototom
  3. https://www.rototomdrums.com/article_al_payson_history.html
  4. http://www.perctek.com/index.php?title=Roto-Toms
  5. https://percussion.byu.edu/roto-toms
  6. https://www.sweetwater.com/insync/rototom/
  7. https://www.masterclass.com/articles/guide-to-tom-tom-drums
  8. https://pas.org/al-payson-2/
  9. http://mikedolbear.com/groovers-and-shakers/groovers-shakers-bill-bruford/
  10. https://remo.com/company/history
  11. https://cso.org/experience/article/19070/remembering-albert-payson
  12. https://www.guitarcenter.com/Remo/Rototoms-6-8-and-10-1274034491676.gc
  13. https://www.sweetwater.com/store/detail/Rototoms--remo-rototom-3-piece-set-spin-tuned-toms
  14. https://www.steveweissmusic.com/product/getting-started-with-roto-toms/articles
  15. https://support.remo.com/hc/en-us/articles/360029217171-Pitch-Ranges-for-Remo-Rototoms
  16. http://www.muzines.co.uk/articles/the-rototom-revolution/13070
  17. https://remo.com/support/faq/drumhead-replacement
  18. https://support.remo.com/hc/en-us/articles/207987616-Rototom-Replacement-Parts-List
  19. https://www.youtube.com/watch?v=eO-ZVxXVA1A
  20. https://www.soundset.com/album_files/EQ107/michael_colgrass_book.pdf
  21. https://www.schott-music.com/en/the-rose-lake-no42242.html
  22. https://www.moderndrummer.com/article/october-november-1980-louie-bellson/
  23. https://www.musicofsound.co.nz/blog/microtonal
  24. https://www.enjoysamples.com/produit/rototoms/
  25. https://rogerarrick.com/rotozilla/RemoRotoTomCatalog.pdf
  26. https://www.steveweissmusic.com/category/weiss-rototoms
  27. https://www.amazon.com/Gammon-Percussion-Double-Braced-Tunable/dp/B002S54DF8
  28. https://www.lpmusic.com/products/cp-rototoms
  29. https://www.daddario.com/products/percussion/evans-drumheads/
  30. https://pearldrum.com/en/products/specialty-item/rocket-toms/rocket-toms
  31. https://the-police-equipment.fandom.com/wiki/REMO_8%2522_Rototom
  32. https://www.moderndrummer.com/article/october-1982-stewart-copeland/
  33. https://www.pulitzer.org/winners/michael-colgrass
  34. https://www.jazzwise.com/features/article/billy-cobham-the-lost-1980-interview
  35. https://moderecords.com/catalog/125colgrass/
  36. https://resources.bcmg.org.uk/creating-music-at-home/ionisation
  37. https://www.musicradar.com/news/10-remo-rototom-drum-performances-that-remind-you-why-you-want-a-set
  38. https://www.drumforum.org/threads/roto-tom-classics.90247/
  39. https://drumcenternh.com/products/used-vintage-remo-roto-tom-7pc-set-w-stands-cases
  40. https://www.ebay.com/b/Remo-Roto-Tom-Drum-Toms/38096/bn_73876570
Add your contribution
Related Hubs
Contribute something
User Avatar
No comments yet.