Hubbry Logo
Medium Mark A WhippetMedium Mark A WhippetMain
Open search
Medium Mark A Whippet
Community hub
Medium Mark A Whippet
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Medium Mark A Whippet
Medium Mark A Whippet
from Wikipedia

The Medium Mark A Whippet was a medium tank employed by the British in World War I. Developed for fast mobile assaults, it was intended to complement the slower British heavy tanks by using its relative mobility and speed in exploiting any break in the enemy lines.[3]

Key Information

Although the track design appears more "modern" than the British Tanks Mark I to V, it was directly derived from Little Willie, the first tank prototype (itself directly taken from the track design of the Holt tractor), and was unsprung. The crew compartment was a fixed, polygonal turret at the rear of the vehicle, and two engines of the type used in contemporary double-decker buses were in a forward compartment, driving one track each.

Development

[edit]

On 3 October 1916 William Tritton, about to be knighted[a] for developing the Mark I, proposed to the Tank Supply Committee that a faster and cheaper tank, equipped with two engines like the Flying Elephant, should be built to exploit gaps that the heavier but slow tanks made,[5] an idea that up till then had been largely neglected.[6] This was accepted on 10 November and approved by the War Office on 25 November. At that time the name for the project was the Tritton Chaser. Traditionally, the name Whippet (after the fast-running dog breed) is attributed to Sir William himself.[7] Actual construction started on 21 December.

The first prototype, with a revolving turret taken from an Austin armoured car – the first for a British tank design, as Little Willie's original turret was fixed – was ready on 3 February 1917 and participated (probably without one) in the tank trials day at Oldbury on 3 March.[8] The next day, in a meeting with the French to coordinate allied tank production, the Commander-in-Chief of the British forces Field Marshal Haig ordered the manufacture of two hundred vehicles, the first to be ready on 31 July. Although he was acting beyond his authority, as usual,[9] his decisions were confirmed in June 1917. The production model had the turret replaced with a fixed armoured structure and the fuel tank was moved from the rear of the vehicle to the front.[10]

The first production tanks left the factory in October and two were delivered to the first unit to use them, F Battalion of the Tank Corps[11] (later 6th Battalion), on 14 December 1917. In December 1917 the order was increased from 200 to 385 but this was later cancelled in favour of more advanced designs, the Medium Mark B, Medium Mark C and Medium Mark D.[12]

Design

[edit]

When driving in a straight line the two engines were locked; turning the steering wheel gradually closed the throttle for the engine of one track and opened the throttle for the engine driving the other.[13] The two engines were joined at their cross-shafts, from which the final drive to the tracks was by chains to sprockets on either side. When steering the clutches joining the cross-shafts were released, one engine sped up while the other slowed down, the turn being on the side opposite to that of the faster running engine. The steering effect could be increased by use of the brakes on one engine or another. This arrangement had the advantage over that of earlier tanks of being controlled by one man only, but called for great skill on the part of the driver, because one or both of the engines could be stalled if care was not exercised.[14] Although in theory a simple solution to give gradual steering, in practice it proved impossible to control the speeds of the engines, causing the vehicle to take an unpredictable path. Drivers grew wary and stopped the vehicle and locked one track before every turn; this caused many track breaks, as the movement became too abrupt.[citation needed] Nevertheless, the vehicle could easily negotiate shell craters. Crews that believed that treads had to be as long as the hull, as with the heavy tanks, were surprised to see the Whippet, with shorter tracks, successfully exit holes.[15]

The fuel tank was in the front of the hull. The sides featured large mud chutes which allowed mud falling from the upper treads to slide away from the tank, instead of clogging the track plates and rollers.

Armament was four 0.303-inch (7.7mm) Hotchkiss Mk 1 machine guns, one covering each direction. As there were only three crewmen, the gunner had to jump around a lot, though often assisted by the commander. Sometimes a second gunner was carried in the limited space, and often a machine gun was removed to give more room, as the machine guns could be moved from one mounting position to another to cover all sides.

Combat history

[edit]
Whippets of 3rd Battalion at Maillet-Mailly on 26 March 1918. Some, in action earlier in the day, were the first Whippets to be used. (Infantry are of the New Zealand Division.)

Whippets arrived late in the First World War, at a time when the British Expeditionary Force, recovering from the Third Battle of Ypres in Flanders, was quite inactive. They first went into action in March 1918 and proved very useful to cover the fighting withdrawal of the infantry divisions recoiling from the German onslaught during the German spring offensive. Whippets were then assigned to the normal Tank Battalions as extra "X-companies". In an engagement near Cachy, a Whippet company of seven tanks wiped out two German infantry battalions caught in the open, killing or wounding over 400.[16] That same day, 24 April, one Whippet was destroyed by a German A7V in the world's second tank battle, the only time a Whippet fought an enemy tank.[17][18]

The Whippet was, a British tank veteran wrote, "the big surprise" of the Royal Tank Corps. Crews used their vehicles' speed to attack troops in the rear. They were so successful that by summer 1918 civilians "seemed to talk in terms of whippets", not knowing of heavy tanks' importance in breaking through fortifications and barbed wire.[15] British losses were so high however that plans to equip five Tank Battalions (Light) with 36 Whippets each had to be abandoned. In the end only the 3rd Tank Brigade had Whippets, 48 in each of its two battalions (3rd and 6th TB). Alongside Mark IV and V tanks, they took part in the Battle of Amiens (8 August 1918) which was described by the German supreme commander, General Ludendorff, as "the Black Day of the German Army". The Whippets broke through into the German rear areas causing the loss of the artillery in an entire front sector, a devastating blow from which the Germans were unable to recover. During this battle, one Whippet – Musical Box – advanced so far it was cut off behind German lines. For nine hours it roamed at will, destroying an artillery battery, an observation balloon, the camp of an infantry battalion and a transport column of the German 225th Division, inflicting many casualties. At one point, cans of petrol being carried on Musical Box's roof were ruptured by small-arms fire and fuel leaked into the cabin; the crew had to don gas masks to survive the fumes. Eventually, a German shell disabled it and as the crew abandoned the tank, one of them was shot and killed and the other two were taken prisoner. “Musical Box” was captured by the Germans, however it was retaken by the British later on in the war. The tank survived the war, and although most likely scrapped post war, 2 other Whippet tanks that saw extensive action are in Museums; A347 Firefly and A259 Caesar II,[19]

The Germans captured fewer than fifteen Whippets, two of which were in running condition.[20] They were kept exclusively for tests and training purpose during the war, but one of them saw action afterwards with the Freikorps in the German Revolution of 1918–1919. The Germans gave them the designation Beutepanzer A.[21]

Japanese Whippets

After the war, Whippets were sent to Ireland during the Anglo-Irish War as part of the British forces there, serving with 17th Battalion, Royal Tank Corps.[22] Seventeen were sent with the Expedition Forces in support of the Whites against Soviet Russia. The Red Army captured twelve, using them until the 1930s and fitted at least one vehicle with a French 37 mm Puteaux gun. The Soviets, incorrectly assuming that the name of the engine was "Taylor" instead of "Tylor" (a mistake many sources still make) called the tank the Tyeilor. A few (perhaps six) were exported to Japan, where they remained in service until around 1930.[23][24]

Whippets were used by the Imperial Japanese Army in Manchukuo and during World War II.[25]

Variants

[edit]
The fast Whippet-Mark V hybrid constructed by Johnson

Major Philip Johnson, the unofficial head of Central Tank Corps Workshops in France, as soon as he received them began fitting one of the Whippets with leaf springs. Later, in 1918, he fitted this vehicle with sprung track rollers, Walter Gordon Wilson's epicyclical transmission from the Mark V and a 360 hp (270 kW) V12 Rolls-Royce Eagle aero-engine. A top speed of about 30 mph (48 km/h) was reached. This project made Johnson the best qualified man to develop the later fast Medium Mark D, which looks like a reversed Medium A. Other experiments included the fitting of a large trailing wheel taken from an old Mark I tank and attaching a climbing tail, in both cases attempts to increase trench-crossing ability.[26]

For a time it was assumed that after the war some Whippets were rebuilt as armoured recovery vehicles, but this was not the case.

The Medium Mark B, a completely different design by Wilson, also had the name "Whippet". For a time it was common to describe any of the lighter tank designs as a Whippet, even the French Renault FT. It had become a generic name.

The German Leichter Kampfwagen – developed from December 1917 – being also a turret-less tank with the engine in front resembled the Whippet, but was a smaller vehicle with thinner armour.

Surviving vehicles

[edit]

Five Whippets survive:

See also

[edit]

Notes

[edit]

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia
from Grokipedia
The Medium Mark A Whippet was a British medium tank developed during World War I for fast mobile operations to exploit breakthroughs created by heavier tanks and infantry, earning its nickname from a top speed of 8 mph—twice that of contemporary heavy tanks like the Mark II. Designed in 1917 by William Foster & Co. as a "Tritton Chaser" prototype, the Whippet featured a lightweight rhomboidal hull powered by two 45 hp Tylor four-cylinder bus engines, allowing for greater mobility compared to the lumbering Mark series tanks. With a combat weight of 14 tons, dimensions of 20 feet in length, 8 feet 7 inches in width, and 9 feet in height, it was armed with four .303-inch Hotchkiss machine guns carrying 5,400 rounds and crewed by three personnel: a driver, commander, and machine gunner. Its 14 mm armor provided modest protection, prioritizing speed over heavy plating, with a maximum road speed of 8.3 mph and a range limited by its fuel capacity. Production commenced at the Wellington Foundry, with 200 units ordered and the first deliveries to France occurring in December 1917; it entered combat on 26 March 1918 near Mailly-Maillet during the . The proved effective in counterattacks, notably the tank 'Musical Box' advanced deep into enemy territory during the Battle of Amiens on 8 August 1918, and on 29 August 1918 in the sector, where tank A259 "Caesar II"—commanded by Lieutenant Cecil Sewell—captured over 20 artillery pieces and earned Sewell a posthumous for his actions before being killed. Post-war, surviving Whippets were repurposed or exported, with examples used by forces in , , , and ; only five remain today, including "" at in Bovington. A rare variant, Johnson's Whippet, was experimentally fitted with a V12 engine in the , achieving speeds up to 30 mph, though it saw no operational service. The design influenced later concepts, marking an early shift toward faster armored vehicles in British doctrine.

Development and Production

Origins and Design Requirements

In 1916, the British Army recognized the limitations of its existing heavy tanks, such as the Mark IV, which were effective at breaking through entrenched lines but too slow to exploit the resulting gaps and pursue retreating enemy forces. This shortfall was evident during early tank operations on the Western Front, where infantry often outpaced the vehicles, allowing German troops to regroup and counterattack. The need for a more mobile "cavalry tank" emerged as a strategic priority to support heavier models by rapidly advancing into enemy rear areas, harassing supply lines, and sowing confusion among disorganized units. In February 1917, following a visit to the Somme front in , , the managing director of Fosters of Lincoln and a key figure in the development of the , proposed a lighter and faster vehicle to the Tank Supply Committee. Drawing from his earlier Lincoln Machine tractor design, Tritton advocated for a that could achieve greater battlefield agility while remaining compatible with the ' existing logistics and infrastructure. This proposal aligned with the Army's urgent demand for a vehicle capable of independent operations following breakthroughs, marking a shift toward more versatile armored forces. The initial design requirements emphasized speed, with a target of up to 13 km/h (8 mph) to enable rapid exploitation of infantry advances, a weight under 15 tons (approximately 14 tons) for improved maneuverability over rough terrain, and armament consisting of multiple .303-inch Hotchkiss machine guns—typically three or four—for against personnel. These specifications ensured the tank could operate alongside heavy units without straining supply chains, using similar tracks and components derived from proven designs. The "cavalry tank" concept thus addressed the tactical gap left by slower heavies, prioritizing mobility and firepower over heavy armor to fulfill the Army's vision for dynamic .

Prototyping and Manufacturing

The first prototype of the Medium Mark A Whippet, known as the Tritton Chaser, was completed in early February 1917 at the facility in , where it featured a single cylindrical turret mounting a Lewis machine gun positioned to the left of the driver. This prototype incorporated a lightweight design with approximately 9 mm armor plating and weighed around 12 tons, emphasizing mobility to address the British Army's requirement for a capable of rapid exploitation of breakthroughs. The vehicle was demonstrated at the Oldbury trials on March 3, 1917, where its performance validated initial concepts despite challenges in single-operator control due to the dual-engine configuration. The prototype featured a dual-engine setup using two 45 hp Tylor JB4 four-cylinder petrol engines, each with independent gearboxes, to improve steering reliability and overall maneuverability. These modifications, including the removal of the offset turret in favor of fixed sponsons for four machine guns to simplify production and enhance combat effectiveness, were refined after the Oldbury trials at the Lincoln facility. The dual-engine system, derived from London bus powerplants, allowed for differential speeds up to 8 mph but required coordinated operation by the crew to avoid steering difficulties. In March 1917, the British War Office placed a production order for 200 units of the refined Medium Mark A, with Sir Douglas Haig approving the contract to equip tank battalions for anticipated offensives. However, deliveries were delayed until December 1917 due to challenges in sourcing sufficient Tylor engines and other components amid wartime supply constraints, resulting in only a handful of tanks reaching by year's end, with the first two delivered to the Tank Corps that month. Manufacturing at adapted existing assembly lines originally used for agricultural and traction engines, employing riveted mild steel plates for the hull to accelerate output while maintaining structural integrity against small-arms fire. By March 1919, the total output reached 200 vehicles, with all units assembled at the Lincoln factory marking the completion of the program's wartime goals despite ongoing material shortages and design iterations. This production run leveraged Foster's expertise in heavy machinery fabrication, enabling the transition from prototype experimentation to serial manufacture in under two years.

Production Challenges and Output

The production of the Medium Mark A Whippet at 's factory in Lincoln began in October 1917, but encountered significant supply chain disruptions, particularly with the twin Tylor JB4 4-cylinder engines and the four Hotchkiss machine guns required for each vehicle, resulting in delayed deliveries throughout 1918. These issues stemmed from wartime prioritization of resources for heavier tanks and the complexity of integrating the French-sourced Hotchkiss guns, which were adapted for tank use but faced intermittent shortages due to cross-channel logistics strains. The in March 1918 further compounded these challenges, as labor shortages and material reallocations to frontline defenses severely hampered the Lincoln factory's output, limiting the number of completed Whippets available for immediate deployment. Factory records indicate that production bottlenecks, including engine reliability testing and component fabrication, extended from initial prototyping successes into full-scale manufacturing, with only a fraction of the ordered units reaching training units by mid-1918. Each Whippet cost approximately £5,000 to produce, reflecting the specialized engineering and materials involved, and an order for 200 vehicles was placed in March 1917, with the first two delivered in December 1917 and additional units arriving in early 1918. By August 1918, 96 had reached the front lines, equipping the 3rd and 6th Tank Battalions of the 3rd Brigade with 48 vehicles each, while the remaining units were completed post-armistice in November 1918. Following the war's end, the surplus Whippets—many of which had not seen —were placed in storage at depots like , but economic pressures led to widespread scrapping in the early , with only a small number retained for training or preserved, ensuring that less than half of the total production ever entered active service.

Technical Design

Chassis and Propulsion System

The chassis of the Medium Mark A Whippet employed an unsuspended running gear with 6 small wheels per side, promoting a low center of gravity for improved stability during high-speed maneuvers but delivering a notably rough ride due to the absence of springing. This design prioritized mobility over comfort, with the tracks supported by five return rollers and an adjustable idler to maintain tension, allowing the vehicle to navigate uneven terrain effectively despite the lack of suspension. Propulsion was provided by two side-by-side Tylor JB4 four-cylinder petrol , each rated at 45 horsepower for a combined output of 90 horsepower, driving independent tracks to enable through variations in engine speed or selective braking on one side. Mounted transversely at the rear, these water-cooled , originally adapted from truck applications, allowed the to achieve greater agility than contemporary heavy tanks by independently controlling each track's velocity. The overall dimensions measured 6.1 meters in length, 2.62 meters in width, and 2.74 meters in height, with a combat weight of 14 tons that balanced speed and load-bearing capacity. A front-mounted holding 318 liters (70 imperial gallons) supported an operational range of 129 kilometers (80 miles) at a top road speed of 13 kilometers per hour, emphasizing the tank's role in rapid exploitation rather than prolonged endurance. Side mud chutes—five per side, including rectangular and circular openings—facilitated clearance of debris from the tracks during off-road travel, though the vehicle's 2.62-meter width restricted trench-crossing to a maximum of 2.1 meters.

Armament, Armor, and Protection

The Medium Mark A Whippet was armed exclusively with machine guns to prioritize mobility over heavy armament, featuring four .303-inch Hotchkiss No. 2 Mk. I* machine guns mounted in ball mountings within a fixed angular fighting compartment—one facing forward, one to the rear, and one on each side. These ball mountings enabled limited traverse for the side and rear guns, allowing 360-degree coverage from the lateral positions without requiring members to expose themselves outside the vehicle. The absence of a main gun underscored the tank's emphasis on speed for exploitation roles rather than direct assault on fortified positions. A total of 5,400 rounds of .303-inch ammunition was carried, stored in racks inside the compartment. The Whippet's armor consisted of riveted mild steel plates ranging from 6 to 14 mm in thickness across the hull and fighting compartment, providing homogeneous protection sufficient against small-arms fire and shrapnel but offering little resistance to or anti-tank rifles. This thin armor represented a deliberate , sacrificing defensive robustness to achieve the vehicle's high speed and maneuverability compared to heavier British tanks. The riveted construction, while simple to manufacture, was prone to spalling and structural failure under impacts from larger-caliber weapons. Protective features were minimal and era-appropriate, with ventilation achieved via louvres on the hull sides and a slot in the rear exhaust to mitigate heat and fumes from the engines and guns, though access for crew relief relied on a small roof hatch or rear door that posed risks in combat. No chemical, biological, or radiological (NBC) protection was incorporated, consistent with World War I standards before such threats were prioritized.

Crew Accommodations and Ergonomics

The Medium Mark A Whippet was operated by a crew of three: a commander who also served as gunner, a driver, and a mechanic who doubled as a second gunner and loader. Occasionally, a fourth crew member was added to assist with gunnery, particularly during intense engagements. The design featured a single open compartment without separate areas for the crew or engines, resulting in a highly confined space where all members shared the same environment amid the two Tylor engines and armament. The commander was positioned in the rear of the fixed fighting compartment, responsible for aiming and firing two of the Hotchkiss machine guns, while the driver sat at the front right, independently clutching and braking the dual engines to control speed and direction. The mechanic occupied the space between them, handling ammunition loading, firing the forward-facing gun, and performing basic maintenance tasks during operation. Crew accommodations were rudimentary and harsh, exacerbated by the lack of isolation from the powerplant and weapons. The engines, located within the fighting compartment, generated stifling heat and toxic fumes that permeated the interior, often making prolonged operation exhausting and hazardous to health. Ventilation was minimal, with only small hatches and a rear door providing limited airflow, though opening them during combat posed significant risks from enemy fire. Fixed seating contributed to discomfort during the tank's high-speed maneuvers, as the unsuspended chassis transmitted intense vibrations and noise from the tracks and engines directly to the crew, limiting effective communication to hand signals or shouts. Visibility was another critical limitation; the driver relied on narrow slits and periscopes obstructed by exhaust gases and dust, while the commander's position offered a better but still restricted field of view, hindering situational awareness in fast-paced advances. To address these design constraints, the British Tank Corps adapted training protocols specifically for Whippet operators, emphasizing versatility and rapid tactical execution over endurance in static fights. Crew members underwent to perform multiple roles, ensuring operational continuity if occurred, with drills focused on exploiting breakthroughs through quick, independent maneuvers rather than sustained support. This approach aligned with the Whippet's intended role as a mobile exploitation , incorporating exercises in , clutching for sharp turns, and coordinated gunnery bursts during high-speed runs, as implemented in Tank Corps schools by late 1917. Such adaptations mitigated some ergonomic shortcomings by prioritizing short, decisive engagements that minimized exposure to the tank's internal rigors.

Operational History

World War I Combat Engagements

The Medium Mark A Whippet entered combat for the first time on 26 March 1918 during the , when 12 tanks of C Company, 3rd Battalion, Tank Corps surprised a mass of German infantry near Colincamps, south of . The Whippets advanced rapidly, splitting into sections to pursue the fleeing enemy to the outskirts of Auchonvillers, forcing a and preventing a breakthrough in British lines without reported mechanical failures or crew losses during 16 hours of operation. The Whippet's most notable contribution came during the Battle of Amiens on 8 August 1918, the opening of the Allied and dubbed the "Black Day of the German Army" by German commander due to the collapse of their lines. Equipped with 72 Whippets across the 3rd and 6th Battalions, Tank Corps, the tanks supported the and Australian infantry in achieving complete surprise through a creeping barrage and low-altitude air support, advancing over 11 kilometers on the first day alone. Whippets exploited the initial breach by heavy tanks, racing ahead at speeds up to 8 mph to disrupt German rear areas; for instance, seven Whippets of , 3rd Battalion, destroyed two full German battalions, inflicting around 400 casualties while losing only four to enemy action. The tank "Musical Box" of B Company, 6th Battalion, commanded by Lieutenant Clement B. Arnold, penetrated deep behind enemy lines, destroying an , a troop camp, several transport vehicles, and a machine-gun post, and killing dozens of German soldiers, before the crew abandoned it after about nine hours when it caught fire from enemy shelling. Whippets continued in exploitation roles during later 1918 offensives, including the Second Battle of Cambrai (27 September–5 October) and the Pursuit to the Selle (8–12 October), where they supported rapid advances by the British Fourth Army, capturing prisoners, guns, and transport vehicles amid the German retreat. On 29 August 1918 in the sector, Whippet A259 "Caesar II," commanded by Cecil Sewell, advanced into enemy positions, capturing four anti-tank guns and over 20 pieces while destroying machine-gun nests; Sewell was , earning a posthumous for his leadership. In these actions, the tanks demonstrated their value in open warfare, outpacing infantry to seize key objectives, but suffered significant attrition—often over half becoming non-operational per engagement—from fire, breakdowns in muddy terrain, and vulnerability to anti-tank weapons, underscoring limitations in off-road performance despite their design speed advantages. By the on 11 November 1918, approximately 96 Whippets were operational within the 3rd Tank Brigade, having inflicted disproportionate casualties on German forces through mobility in pursuit phases, though critiques focused on frequent mechanical unreliability and thin armor in contested ground.

Post-War Service and Captures

Following the of 1918, surplus Medium Mark A Whippets were repurposed for British military operations during the Anglo-Irish War (1919–1921), where they supported patrols and security duties with the 17th Battalion of the Royal Tank Corps. These tanks, valued for their mobility in urban and rural environments, were deployed and surrounding areas but saw limited combat due to the irregular nature of the conflict. A small number of Whippets were exported to around 1921, marking the Imperial Japanese Army's first acquisition of tanks; approximately six vehicles were obtained for training purposes at the Infantry Academy, where they influenced early armored doctrine before being phased out by the late 1920s. The Japanese modified some with Type 3 heavy machine guns and enhanced driver protection to adapt them for local conditions, though they remained primarily instructional tools rather than frontline assets. During the of 1918, the captured several —fewer than fifteen in total—with at least two in running condition for evaluation. These captured vehicles were tested but not placed into widespread production or combat use by German forces; instead, they informed post-war operations, with at least one employed during the German Revolution of 1918–1919. The Germans did not redesignate them as Kampfwagen Mitteltraktor, a term associated with their indigenous Leichte Kampfwagen II design, which coincidentally resembled the . In the (1918–1922), British-supplied Whippets initially supported White Russian forces but were largely captured by the during Allied interventions. At least twelve were seized in operational condition, with the Soviets rearming some—such as one fitted with a 37 mm gun—for use against Polish forces in the Polish-Soviet War of 1920; these vehicles provided early experience in mechanized warfare but were scrapped by the mid-1920s without direct influence on the T-18 design.

Performance in Later Conflicts

The Imperial Japanese Army acquired approximately six Medium Mark A Whippet tanks in 1921, marking them as the first armored vehicles in Japanese service, where they were employed primarily for training and maneuvers through the 1920s and into the early 1930s. These tanks saw use in the puppet state of during the 1930s, serving in training roles amid Japan's expansion in northeastern , though their limited numbers and outdated design restricted them to non-combat functions. By the onset of , surviving examples were largely relegated to static defensive positions in Pacific garrisons, where they provided minimal utility against modern threats until being phased out around 1945 due to obsolescence and maintenance difficulties. In British service, the Whippet remained in reserve stocks into the , with most examples scrapped during as newer designs like the Medium tanks entered production, though a few persisted in training roles to maintain armored expertise. One such tank was utilized in 1940 for exercises in , simulating enemy armor in anti-tank drills to bolster civilian defense preparedness during the early stages of . Captured Whippets from earlier service briefly entered Soviet inventories during the interwar era, but no significant roles are recorded in the or early operations. Overall, the Whippet's performance in these later conflicts underscored its rapid obsolescence; its thin armor and machine-gun armament proved ineffective against contemporary anti-tank weapons, while high maintenance demands and mechanical unreliability limited it to morale-boosting training and static roles, hastening its replacement by more advanced vehicles across all users.

Variants and Preservation

Experimental and Modified Variants

In 1918, Major modified a standard Medium Mark A at the Central Tank Corps Workshops in to create the "Fast Whippet," replacing the twin Tylor engines with a single V12 aero-engine producing approximately 300 horsepower and adding leaf springs to the suspension for improved ride quality. This upgrade enabled a top speed of 30 mph (48 km/h), significantly exceeding the original model's 8 mph capability, while retaining the existing Vickers machine guns and armor plating. Despite successful trials demonstrating enhanced mobility, the project was rejected for production due to the high cost of the powerful engine and concerns over instability at high speeds on the Whippet's narrow tracks. Following the capture of several Whippets during , German forces conducted trials with examples such as A220 and A249, evaluating them for utility in rear-area roles. These experiments, detailed in postwar analyses of German beutepanzer (captured armor) usage, highlighted the Whippet's reliable Ricardo engine and mobility for non-combat applications but did not lead to widespread adoption due to the war's end and limited numbers available. In the 1920s, Soviet forces adapted captured Whippets during the Russian Civil War and early interwar period. At least one example was rearmed with a 37 mm gun sourced from Renault FT tanks, enhancing its anti-personnel and light anti-armor role in scouting operations. These changes, implemented by Bolshevik engineers, influenced early Soviet light tank designs, though the aging Whippets were phased out by the mid-1930s in favor of indigenous models like the T-18.

Surviving Examples and Restoration

Only five examples of the Medium Mark A Whippet are known to survive today, out of approximately 200 produced during , reflecting the extensive scrapping of these vehicles in the for metal recovery and military downsizing. These rare artifacts are preserved in museums across five countries, with conditions ranging from display-ready to incomplete or stored, and restoration efforts have focused on stabilizing original components while addressing and mechanical degradation from over a century of exposure. The most prominent survivor is A259, nicknamed "Caesar II," housed at The Tank Museum in Bovington, Dorset, . This vehicle, which served with C Battalion during the war, is in preserved condition suitable for static display and has undergone conservation work to maintain its structural integrity, though specific details on recent mechanical overhauls are limited. In Belgium, A347, known as "Firefly" from its service with B Company of the 6th Battalion, is displayed at the Royal Museum of the Armed Forces and of Military History in . It retains its original factory green paint, which is described as thin and murky due to age, and has been conserved for exhibition without major restoration alterations to preserve its historical authenticity. Canada's surviving Whippet, reported as serial A231 and nicknamed "Carnaby" from its time with A Company of the 3rd Battalion (though serial uncertain), is located at the Base Borden Military Museum in . This example is preserved for display, with efforts centered on protective storage to prevent further deterioration, though its exact mechanical state remains undocumented in . In , the designated HMLS Union (possibly serial A387) stands as a war memorial at the College in since 1926. Originally shipped for recruitment purposes and used during the 1922 , it was restored following that conflict to honor its role in suppressing the uprising, including repainting in silver for ceremonial display. The fifth known survivor, with an uncertain serial number around A284, is in the United States at Fort Moore, Georgia (as of January 2025). Its condition is unknown, with no recent restoration efforts reported, highlighting ongoing challenges in tracking and accessing this example. Preservation of these Whippets faces significant hurdles due to their rarity, as most were scrapped in the and amid economic pressures and rearmament programs, leaving incomplete historical records on serial numbers, battle histories, and provenances. Efforts to address these gaps often rely on cross-referencing wartime logs and photographs, but authentication remains difficult without comprehensive documentation. Some examples, like those captured by German or Allied forces during the war, add layers of provenance complexity, though none of the survivors trace directly to combat use beyond the South African case.

References

Add your contribution
Related Hubs
User Avatar
No comments yet.